VONYX VX210 Full PA Sound System Instruction Manual

: June 12, 2024
: VONYX

Table of Contents

VONYX VX210 Full PA Sound System
Product Information
Product Usage Instructions
UNPACKING INSTRUCTION
POWER SUPPLY
REPLACING THE FUSE
OPERATION PANEL
SPEAKERS
CONNECTING WITH BT
TECHNICAL SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VONYX VX210 Full PA Sound System

$VONYX-VX210-Full-PA-Sound-System $2$$

Ref. nr.: 170.110

V1.1

Product Information

Congratulations on your purchase of the Vonyx VX210 Full PA Sound System.
This product is designed to provide high-quality sound for various applications.
Please read the manual thoroughly before using the product to fully understand its features and ensure proper usage.
Keep the manual for future reference.
The product is certified with the CE mark.
Any modifications or changes to the product will invalidate the CE certificate and warranty.
Electric products should not be disposed of in household waste but taken to a recycling center.
The specifications provided are typical, and actual values may slightly vary between units.

Product Usage Instructions

Prior to using the product, consult a specialist for advice.
When switching on the product for the first time, a temporary smell may occur, which is normal and will dissipate over time.
Do not open the housing as it contains voltage carrying parts.
Avoid placing metal objects or liquids into the product to prevent electrical shock and malfunction.
Avoid placing the product near heat sources or on a vibrating surface, and do not cover the ventilation holes.
The product is not suitable for continuous use.
Handle the mains lead with care and avoid damaging it.
Avoid repeatedly switching the product on and off to prolong its lifespan.
Keep the product out of the reach of children and do not leave it unattended.
Avoid using cleaning sprays on switches, as they can cause dust and grease deposits. Consult a specialist in case of malfunction.
Avoid forcing the controls.
Take note of the high voltage warning symbol, indicating the presence of high voltages inside the housing that can cause a shock hazard.
Read and adhere to the important instructions in the manual.

Note: The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings.

Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to benefit fully from all features.
Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

Prior to using the product, please ask advice from a specialist. When the product is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
The product contains voltage carrying parts. Therefore do NOT open the housing.
Do not place metal objects or pour liquids into the product. This may cause electrical shock and malfunction.
Do not place the product near heat sources such as radiators, etc. Do not place the product on a vibrating surface. Do not cover the ventilation holes.
The product is not suitable for continuous use.
Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
When unplugging the product from a mains outlet, always pull the plug, never the lead.
Do not plug or unplug the product with wet hands.
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
If the product is damaged to such an extent that internal parts are visible, do NOT plug the product into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the product to a rheostat or dimmer.
To avoid fire and shock hazard, do not expose the product to rain and moisture.
All repairs should be carried out by a qualified technician only.
Connect the product to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
During a thunderstorm or if the product will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
If the product has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the product in humid rooms or outdoors.
To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.
Do not repeatedly switch the product on and off. This shortens the life time.
Keep the product out of the reach of children. Do not leave the product unattended.
Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
Do not force the controls.
If this product is with speaker inside which can cause magnetic field. Keep the product at least 60cm away from computer or TV.
If this product have a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the product for a long period of time. Otherwise the battery may be permanently damaged.
If the battery is damaged please replace with same specifications battery. And dispose the damaged battery environment friendly.
If the product has fallen, always have it checked by a qualified technician before you switch the product on again.
Do not use chemicals to clean the unit. They damage the varnish. Only clean the product with a dry cloth.
Keep away from electronic equipment that may cause interference.
Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
Switch the product off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the product.
Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
The mains voltage is 220-240Vac/50Hz. Check if power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this product.
Keep the original packing material so that you can transport the product in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.
The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate and their guarantee!
NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be returned, it is important that the product is returned in the original factory box and packaging.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

POWER SUPPLY

The label on the back/under side of the product indicates the mains voltage to which it must be connected. Check that the mains voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The unit must also be connected directly to the mains voltage and no dimmer or adjustable power supply may be used. Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate electrical ground to avoid the risk of electrocution or fire.

REPLACING THE FUSE

If the fuse is defective, replace the fuse with a fuse of the same type and value. Before replacing the fuse, unplug mains lead. Procedure:

Step 1: Open the fuse holder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuse holder.
Step 3: Install the new fuse in the fuse holder.
Step 4: Replace the fuse holder in the housing.

OPERATION PANEL

MICROPHONE INPUT
Balanced XLR input for connecting a dynamic microphone.
LINE INPUT
Unbalanced 6.3mm line jack input for connecting a guitar, synthesizer,
CD- player or other line-level devices.
BASS
Rotate to adjust the low (bass) tones of the corresponding channel.
TREBLE
Rotate to adjust the high (treble) tones of the corresponding channel.
LEVEL
Rotate to adjust the volume level of the corresponding channel.
FX
Rotate to adjust the fx effect level of the corresponding channel.
LINE INPUT
RCA line input.
DELAY LEVEL
Adjust the mix level of the effect sound.
DELAY TIME
Adjust the time interval of the delays.
DELAY REPEAT
Adjust the rate of the delays.
TREBLE
Rotate to adjust the high (treble) tones of all channels.
MID
Rotate to adjust the mid tones of all channels.
BASS
Rotate to adjust the low (bass) tones of all channels.
AUX INPUT
Unbalanced 6.3mm auxiliary jack input.
AUX OUTPUT
Unbalanced 6.3mm auxiliary jack output.
AUX INPUT
RCA auxiliary input. Signal is sent to the speaker output directly.
REC OUTPUT
RCA REC output to connect with a tape deck, soundcard, or portable recorder. The signal mirrors the speaker output.
MP3 BUTTON CLUSTER
- Stop – press to stop play.
- Play/pause – press to (re)start or pause playback.
- Previous – press to change to previous track. Press and hold to decrease track volume.
- Next – press to change to next track. Press and hold to increase track volume. Mode – press to switch modes.
USB
SD $VONYX-VX210-Full-PA-Sound-System $6$$
AUX LEVEL
Rotate to adjust the AUX channel volume level.
MASTER LEVEL
Rotate to adjust the master volume level. $VONYX-VX210-Full-PA-Sound-System $7$$
POWER ON/OFF
Press to turn the device on/off.
AC IN / FUSE HOLDER
Socket for plugging in the supplied power cord. For instructions on how to change the fuse, see “REPLACING THE FUSE”.
SPEAKER OUTPUT
6,3mm speaker output connectors.

SPEAKERS

SPEAKER CONNECTOR 6,3mm jack speaker connectors.
SPEAKER CONNECTOR Screw type speaker connectors.

CONNECTING WITH BT

Activate the BT-function on your device (mobile phone, tablet etc.) from which you want to play the music. See the operating instructions for that device.
Use the “MODE” button to activate the BT-function.
Select “VX210” on your BT-device and initiate the BT-connection.

If a password is required, enter “0000”.
Attention: The BT distance is approx. 10 meter without any barrier.

TECHNICAL SPECIFICATION

Input connections : 3.5mm Jack, 6.3mm Jack, SD, USB, XLR (3-pin)
Output connections : 6.3mm Jack
Output power: Max : 800W
Output power: Speaker : 500W
Amount of tweeters : 1
Diameter woofer : 10″
Magnet type : Ferrite
Frequency response : 50 – 20.000 Hz
Impedance : 8 Ohm
SPL @ 1W/1m : 90dB
SPL max : 117dB
Dimensions (L x W x H) : 670 x 370 x 689 mm
Dimensions: Per speaker : 290 x 340 x 530mm
Weight (kg) : 29,80
Weight: Satellite (kg) : 8.1

The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
The products referred to in this manual conform to the European Community Directives to which they are subject:

European Union
Tronios B.V.,
Bedrijvenpark Twente Noord 18, 7602KR Almelo, The Netherlands
- 2014/35/EU
- 2014/30/EU
- 2011/65/EC
- 2014/53/EU
United Kingdom
Tronios Ltd.,
130 Harley Street,
London W1G 7JU, United Kingdom
- S.I. 2016:1101
- S.I. 2016:1091
- S.I. 2012:3032
- S.I. 2017:1206