klass LIGHT KIT L1S Destratification Fan User Manual

klass LIGHT KIT L1S Destratification Fan

Product Information

Product: MODULO SLIM / TENERIFE – LIGHT KIT L1S

Model: V.1_02/2023

Languages: English, Italiano, Deutsch, and Français

Usage: For household use only

Contact Information:

• Service Client:aftersales@klassfan.com /
• contact@klassfan.com
• Tel: +34 960 082 885

Product Usage Instructions

Installation

1. Turn off the power line of your fan through your circuit breaker.

2. Pass the wire through the hole in the light connector.

3. Align the light connector to the motor shaft and tighten it. Screw down the light connector from the side.

4. Remove one of the three screws from the rotor holder, and unscrew the other two.

5. Apply the fixing plate to the unscrewed screws and turn it to
   block it. Bring the third screw. Tighten the three screws.

6. Take out the wires from the inside of the rotor.

7. Connect the fan wires with the wires of the light kit.

8. Install the lampshade into the light plate.

Recycling

To recycle the product and packaging:

• Separate plastic and cardboard packaging and dispose of each material in the appropriate recycling container.
• Contact your local authorities for more information on recycling.

Note: Worn household devices should not be discarded with local refuse services. The European directive 2012/19/EU requires a separate collection of worn devices to optimize recovery and recycling rates of components, reducing detrimental effects on the environment and human health.

MODULO SLIM / TENERIFE – LIGHT KIT L1S

• Please read this user manual carefully before use, and keep it for future reference.
• HOUSEHOLD USE ONLY
• Read the instruction manual included with your ceiling fan.
• Replaceable (LED only) light source by end-user
• Replaceable control gear by a professional

INSTALLATION

ATTENTION!
Turn off the power line of your fan through your circuit breaker.

INSTALLATION OF LIGHT CONNECTOR

• Pass the wire through the hole in the light connector.
• Align the light connector to the motor shaft and tighten it.
• Screw down the light connector from the side.
• Remove one of the three screws from the rotor holder, and unscrew the other two.
• Apply the fixing plate to the unscrewed screws and turn it to block it.
• Bring the third screw.
• Tighten the three screws.
• Take out the wires from the inside of the rotor.
• Connect the fan wires with the wires of the light kit.
• Install the lamp shade into the light plate.

RECYCLING

• Plastic and cardboard packaging can be recycled. Separate and dispose of each material in the appropriate recycling container. Consult your local authorities for more information on recycling

DISCARDING WORN HOUSEHOLD DEVICES

• The European directive 2012/19/EU pertaining to electrical and electronic waste prohibits such household goods from being discarded with local refuse services. Worn devices must be collected separately to optimize the recovery and recycling rates of the components therein to reduce detrimental effects on the environment and on human health.
• In accordance with European directives applicable to this product.

Customer service:

• aftersales@klassfan.com
• contact@klassfan.com
• Tel : +34 960 082 885

References

• KLASSFAN Premium Ceiling Fans
• Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>