PALMERO 10DIS DisCide ULTRA Surface Disinfectant Instructions
- June 12, 2024
- PALMERO
Table of Contents
PALMERO 10DIS DisCide ULTRA Surface Disinfectant Instructions
CLEANING before disinfecting*
Step 1: Spray hard non-porous surface with DisCide Ultra Spray to help
loosen bioburden.
Step 2: Wipe down the surface with a Dis Cide Ultra towelette to remove
debris and bio burden.
Step 3: Dispose of used Dis Cide Ultra towelette.
- If less than 5% bio burden present, 1-step cleaning and disinfecting can occur.
DISINFECTING after cleaning*
Step 1: Use Dis Cide Ultra towelette or Spray Dis Cide Ultra Spray on the
pre-cleaned surface.
Step 2: Leave the surface wet for one minute.
Step 3: Wipe down the surface with a Dis Cide Ultra towelette to remove
any residue chemical left behind.
Step 4: Dispose of used Dis Cide Ultra towelette.
Dis Cide ULTRA Product Line
| TOWELETTES | SPRAYS | REFILLS | ACCESSORIES |
|---|
| 
|
| 
|
| 
|
| 
Ref# 10DIS 10″ x 10″ towelettes 60 count canister| Ref# 60DIS 6” x 6 3/4”
towelettes 160 count canister| Ref# 3565Q Quart Sprayer| Ref# 3564 4 oz.
Bottle| Ref# 3565G Gallon Refill| Ref# 3567 Empty quart bottle with sprayer
and DisCide ULTRA label| Ref# 3567T Quart spray trigger| Ref# 3519 Unlabeled
empty quart bottle with sprayer
For more information, visit palmerohealth.com, email customerservice@palmerohealth.com or call 800.344.6424.
LIT210-0423
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>