TIRUNI TG026 Super Bass Bluetooth Speaker User Manual

TIRUNI TG026 Super Bass Bluetooth Speaker

Product Information

• This device complies with part 15 of the FCC Rules.

• Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including
     interference that may cause undesired operation.

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

• This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Product Usage Instructions

1. Ensure compliance with FCC Rules: This device complies with part 15 of the FCC Rules. Make sure to operate the device within the specified conditions to avoid harmful interference.
2. Avoid unauthorized modifications: Do not make any changes or modifications to the equipment without the express approval from the responsible party. Unauthorized modifications may result in the loss of your authority to operate the device.
3. Follow radiation exposure limits: This equipment complies with FCC radiation exposure limits. To ensure safe operation, maintain a minimum distance of 20cm between the radiator and your body during installation and use.

PRODUCT SPECIFICATIONS

• BT: V5.3
• Support: L2CAP/A2DP(AVCTP/AVDTP/AVRCP), can receive AUDIO signal and control the AUDIO device. support HSP/HFP (Handsfree profile), Built-in Mic for hands-free phone call
• Working distance: 1 OM
• SNR: ?95db
• Battery:3.7V 2400 mAh
• Charging: 5 V /1 000mA
• Unit weight: 1110g
• Frequency response: 50 Hz-20KHz
• Normal volume playing time: 2H
• Power : 40./BW *2
• Speaker driver : 0 52 mm plus* 2
•  Unit size: L590W66H66mm

PRODUCT FEATURE

1. Built-in Low freq radiators, Super dynamic low frequency sound pressure gain, 1s enring transparent an ex1 e.
2. International advanced BT chip and circuit design techniques. support all BT device ; play music after pairing with BT device .for example mobile/ MID/ TV, the working distance is more than 1 OM.
3. With Mic for hands-free phone call function.
4. Built-in MP3/WMA decoding, can directly play TF card, U disk, mobile and other USB storage devices stored MP3, WMA format music files.
5. Build-in the FM radio module, convenient to auto scan and save radio channels.
6. Support AUX IN audio input
7.  Support TWS

KEY & SLOT FUNCTION

1. Power switch: long press for “on/off” . when play music(USB card/ TF card/LINE IN/ BT), press short for “play/pause”. under BT mode with mobile paired ,press short to answer a call ,press again to hand up . press long to disconnect BT. in FM mode, press short to search station automatically, press again to stop searching)
2. When play music, press short for next song, press long to turn up the volume.
3. When play music , press short for last song, press long to turn down the volume.
4. When play music, press short to switch USB/TF/FM /BT.(switch to BT mode without pairing. press the “M”key for 4 seconds either of the speaker until hear a hint and meantime the button light stop flashing, now is in TWS mode, then can pair the mobile.
5. Indicator light: blue when working , red when charging (indicator light off when full charging )
6. AUX : it can play audio via 3.5mm AUX cable to audio device (Under FM mode, put in the AUX cable to get better FM radio station )
7. DC 5V charging slot: use the standard mini USB micro charging cable for power charging.
8. TF slot: it can decode and play MP3 /WMA format audio when put TF card into the slot.
9. USB slot: it can decode and play MP3 /WMA format audio when put USB card into the slot.

Note
Under FM mode, put in the AUX cable to get better FM radio station

RESET
press the power switch about 8 seconds for reset.

Warning statement

• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.
• Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>