KUFATEC RFK-VW T7 ST Complete Set Rear View Camera Instruction Manual
- June 11, 2024
- KUFATEC
Table of Contents
RFK-VW T7 ST Complete Set Rear View Camera
Product Information: Complete Set Rear View Camera v1.0
The Complete Set Rear View Camera is a product designed to
provide drivers with a clear view of the area behind their vehicle.
The product comes with all the necessary components to install a
rear view camera on the vehicle. The product is manufactured by
Kufatec GmbH & Co. KG and the user manual provides detailed
instructions for installation and usage.
Contents:
- Liability Exclusion
- Copyright
- General notes
- Safety Instructions
- Requirements for the intended use
- How to connect a cable to another
- Note Cable Inscription/Color
- Assembly Instructions
- Assembly Note
- Disassembly coverings front driver’s side
- Disassembly load sill guard
- Disassembly vehicle headliner
- Disassembly side covering trunk driver’s side
- Disassembly tailgate covering
- Disassembly tailgate handle
- Assembly/Connection rear view camera
- Cable routing from rear view camera to the front
- Connection fuse box/gateway/CAN
- Connection video cable
- Connection ground
- Assembling the vehicle
- Coding with Coding Interface
- Coding Interface
- Bus rest
- Additional vehicle function
- Connection/Troubleshooting cable set
Assembly Instructions:
The assembly instructions for the Complete Set Rear View Camera
are provided in the user manual. The following is a brief overview
of the assembly process:
-
Disassemble the coverings from the front driver’s side, load
sill guard, vehicle headliner, side covering trunk driver’s side,
tailgate covering, and tailgate handle. -
Connect the rear view camera and route the cable to the front
of the vehicle. -
Connect the video cable and ground cable to the appropriate
components. -
Assemble the vehicle.
-
Code the system with the Coding Interface.
Note: It is recommended to refer to the relevant sections of the
user manual for detailed instructions on each step of the assembly
process.
Installation Instructions
Complete Set Rear View Camera
v1.0 (05.12.2022)
Kufatec GmbH & Co. KG – Dahlienstr. 15 – 23795 Bad Segeberg – e-mail: info@kufatec.de
1
Contents
1 Liability Exclusion
3
2 Copyright
4
3 General notes
4
4 Safety Instructions
5
5 Requirements for the intended use
5
6 How to connect a cable to another
6
7 Note Cable Inscription/Color
7
8 Assembly Instructions
8
9 Assembly Note
9
10 Disassembly coverings front driver’s side
10
11 Disassembly load sill guard
12
12 Disassembly vehicle headliner
13
13 Disassembly side covering trunk driver’s side
14
14 Disassembly tailgate covering
16
15 Disassembly tailgate handle
17
16 Assembly/Connection rear view camera
18
17 Cable routing from rear view camera to the front
19
18 Connection fuse box/gateway/CAN
20
19 Connection video cable
21
20 Connection ground
22
21 Assembling the vehicle
23
22 Coding with Coding Interface
23
23 Coding Interface
23
24 Bus rest
24
25 Additional vehicle function
24
26 Connection/Troubleshooting cable set
24
Kufatec GmbH & Co. KG – Dahlienstr. 15 – 23795 Bad Segeberg – e-mail: info@kufatec.de
2
8 Assembly Instructions
The following illustration shows the cable routing as well as the position of
the individual components.
1 3,4,5
2
1
4,5 3
2
Figure 3: Vehicle overview
· 1 Rear view camera · 2 17-pole plug (alternative CAN connection) · 3 Ground
connection · 4 CAN gateway · 5 Fuse box Please be aware that this overview is
only for illustration purposes. Always lay the cable set in the most
convenient and shortest way possible. For a detailed description of the cable
routing,
please refer to the relevant sections of the following manual.
Kufatec GmbH & Co. KG – Dahlienstr. 15 – 23795 Bad Segeberg – e-mail: info@kufatec.de
8