BOSCH GBL 18V-750 Cordless Blower User Manual

June 12, 2024
Bosch

BOSCH GBL 18V-750 Cordless Blower

Safety Notes

Explanation of symbols on the machine

  • General hazard safety alert.
  • Read instruction manual.
  • Do not expose to rain.
  • WARNING: Beware of thrown objects.
  • WARNING: Keep bystanders away.
  • Keep hands, feet or loose clothes out of the the openings while the product is running.
  • Rotating fan. Keep hands, feet, long hair or loose clothes out of the openings while the product is running.
  • Wear eye and ear protection.

WARNING: Disconnect battery before maintenance.

General Power Tool Safety Warnings

WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions  listed below may result in electric shock, fire and/ or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

  • Keep work area clean and well lit. Cluttered or dark areas invite accidents.
  • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
  • Other persons and animals should remain at a distance of 3 metres or more when the machine is being used. Dirt should never be blown in the direction of bystanders.
  • Stay alert for hazards that cannot be heard when operating the leaf blower.
  • Be careful not to trip over the machine when placing it on the ground.
  • The user is responsible for accidents or hazards occurring to other people or their property.

Electrical safety

  • Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
  • Do not expose the power tool to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
  • Avoid all bad weather conditions, especially when there is a risk of lightening.

Personal safety

  • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
  • Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
  • Wear suitable clothing, including long trousers. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
  • Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
  • Do not run with the power tool.
  • Always use the product at waist level on the ground.
  • Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

Power tool use and care

  • Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
  • Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
  • Never spray the product with water. Never immerse the product in water.
  • Only operate the product with mounted nozzle.
  • Blow garden waste only. Do not blow or use the product near hot, flammable or explosive material. Do not blow snow or objects that could become a projectile. Do not use the blower as a propulsion for vehicles (e.g. skateboard).
  • The machine continues to blow for a few seconds after being switched off. Allow the motor to stop rotating before switching on again. Do not rapidly switch off and on.
  • This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the product.
  • Keep all cooling air inlets clear of debris.
  • Do not modify the product. Unauthorized modifications may impair the safety of your product and may result in increased noise and vibration.
  • Always start the product at a low speed level, especially in cold temperatures.
  • Do not place other objects on the product.
  • Do not use the product in closed rooms where dust can be inhaled.
  • If the tool exhibits unusual noise or vibration, especially from the fan, return it to the service centre.

Safety

Instructions and Recommendations for Optimal Handling of the Battery

  • Ensure the product is switched off before inserting the battery. Inserting the battery into a product that has the switch on can cause accidents.
  • Use only Bosch batteries intended specifically for this product. Use of any other batteries may create a risk of injury and fire.
  • Do not open the battery. There is a risk of short-circuiting. Protect the battery against heat (e.g., against continuous intense sunlight), fire, water, and moisture. There is a risk of explosion.
  • When not using the machine, keep the battery not in use away from paper clips, coins, keys, nails, screws, or other small metal objects that could cause bridging of the terminals. Shorting the battery terminals together may cause burns or a fire.
  • In case of damage and improper use of the battery pack, vapours may be emitted. Ventilate the area and seek medical help in case of complaints. The vapours can irritate the respiratory system.
  • Only use the battery with products from the manufacturer. This is the only way in which you can protect the battery against dangerous overload.
  • The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally. An internal short circuit may occur, causing the battery to burn, smoke, explode or overheat.
  • Do not short-circuit the battery. There is a risk of explosion.
  • Protect the battery against moisture and water.
  • Store the product and battery only within a temperature range between –20 °C and 50 °C . As an example, do not leave the battery in the car in summer.
  • Occasionally clean the venting slots of the battery using a soft, clean and dry brush.

Product Description and Specifications

Read all safety warnings and all instructions. Failure to follow the safety warnings and instructions may result in electric shock, fire and/or serious injury. Please observe the illustrations at the ending of this operating manual.

Intended Use
The product is intended for blowing leaves, and garden waste such as grass, twigs and pine needles.

Product Features (see figure A)
The numbering of the product features refers to the illustration of the product on the graphics pages.
Delivery scope

  1. Controller for airflow speed
  2. On/Off switch
  3. Type plate / serial number
  4. Air intake
  5. Tube
  6. Attachment point for tube
  7. Charger a)
  8. Battery charge-control indicator)
  9. Batterya)
  10. Battery release button)
    • Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range.

Technical Data

Cordless leaf blower   GBL 18V-750

Article number 3 600 HD2 000
Rated voltageA) V 18
Airflow speed, max.A) km/h 198
Volume flow rate, max. m3/h 750
Weight according to EPTA-Procedure 01:2014 A)
– without battery kg 2.8
– with battery kg 3.8 (ProCORE 5.5 Ah)

− 3.8 (ProCORE 8.0 Ah)

− 4.1 (ProCORE 12.0 Ah )

Serial number| | see type plate on product
Recommended ambient temperature during char-

ging

| °C| 0 … +35
Permitted ambient temperature during operation B)

and storage

| °C| -10 … +40
Compatible batteries| | GBA 18V… ProCORE18V..

1.5 Ah, 5.5 Ah, 8.0 Ah, 12.0 Ah

Recommended batteries| | ProCORE18V… ≥ 5.5 Ah
Recommended chargers| | GAL 18…

GAX 18…

  • Depends on battery in use
  • Limited performance at temperatures < 0 °C

Noise/Vibration Information

Rechargeable battery

Bosch sells some cordless power tools without a rechargeable battery. You can tell whether a rechargeable battery is included with the power tool by looking at the packaging.

Charging the battery

  • Use only the chargers listed in the technical data. Only these chargers are matched to the lithium-ion battery of your power tool.

Note: Lithium-ion rechargeable batteries are supplied partially charged according to international transport regulations. To ensure full rechargeable battery capacity, fully charge the rechargeable battery before using your tool for the first time.

Inserting the Battery
Push the charged battery into the battery holder until it clicks into place. Bosch recommends using battery packs with a capacity of at least 3.0 Ah.

Removing the Battery
To remove the rechargeable battery, press the battery release button and pull the battery out. Do not use force to do this. The rechargeable battery has two locking levels to prevent the battery from falling out if the battery release button is pressed unintentionally. The rechargeable battery is held in place by a spring when fitted in the power tool.

Battery charge indicator
The green LEDs on the battery charge indicator indicate the state of charge of the battery. For safety reasons, it is only possible to check the state of charge when the power tool is not in operation. Press the button for the battery charge indicator or to show the state of charge. This is also possible when the battery is removed. If no LED lights up after pressing the button for the battery charge indicator, then the battery is defective and must be replaced.

Battery model GBA 18V…

LED Capacity

3× continuous green light 60–100 %
2× continuous green light 30–60 %
1× continuous green light 5–30 %
1× flashing green light 0–5 %

Battery model ProCORE18V…

LED Capacity

5 × continuous green light 80–100 %
4 × continuous green light 60–80 %
3 × continuous green light 40–60 %
--- ---
2 × continuous green light 20–40 %
1 × continuous green light 5–20 %
1 × flashing green light 0–5 %

Recommendations for Optimal Handling of the Battery
Protect the battery against moisture and water. Only store the battery within a temperature range of −20 to 50 °C. Do not leave the battery in your car in the summer, for example. Occasionally clean the ventilation slots on the battery using a soft brush that is clean and dry. A significantly reduced operating time after charging indicates that the battery has deteriorated and must be replaced. Follow the instructions on correct disposal.

Mounting and Operation

Fitting the nozzle

Inserting/charging the battery Switching on and off Adjusting the airflow speed Working Advice Maintenance

  • Caution: Switch power tool off and remove battery from machine before adjusting or cleaning.
    • The battery has a double locking system to provide for additional security. Press the release button once to disconnect the battery from the power supply of the device, but use the second locking mechanism for transporting the machine in the garden without activating the ma chine.
    • For best results, start the tool with full battery charge. Charge status can be checked by pressing the button on the battery and reading the LED indicator. The numbering of the product features refers to the illustra-tion of the product on the graphics pages.

Action Figure         page

Delivery scope A 180
Fitting the nozzle B 180
Inserting/charging the battery C 181
Switching on and off D 181
Adjusting the airflow speed E 181
Working Advice F 181
Maintenance G 182

Symbols

The following symbols are important for reading and under-standing the original instructions. Please take note of the symbols and their meaning. The correct interpretation of the symbols will help you to use the product in a better and safer manner.

Troubleshooting

The following chart lists problem symptoms, possible causes and corrective action, if your machine does not operate properly. If these do not identify and correct the problem, contact your service agent.

  • Warning: Switch off the machine prior to any troubleshooting.
  • Warning: In the event of an accident or tool breakage, stop the machine immediately and remove the battery.
Problem Possible Cause Corrective Measure
Machine fails to oper- Battery discharged Recharge battery
ate Battery not fully connected Insert the battery correctly (see figure

C )
| Battery too hot/cold| Allow to cool/warm. Always start the product at a

low speed

| Machine defective| Contact Service Agent.
Machine functions in-| On/Off switch defective| Contact Service Agent.
termittently| Controller for airflow speed damaged| Contact Service Agent.
Excessive vibrations/

noise

| Machine defective| Contact Service Agent.
Run time per battery

charge too low

| Battery has not been used for long period or only

for short terms

| Charge battery completely
| Defective battery| Replace battery
Machine does not blow| Tube obstructed| Clear tube
Reduced airflow| Air intake obstructed| Clear air intake
| Battery is too cold| Always start the product at a low speed
Tube cannot be moun-

ted on the machine

| Incorrect assembly| Mount the tube correctly (see figure B )

Maintenance and Service

Maintenance, Cleaning and Storage

  • Have your product serviced only by a qualified spe-cialist using only original replacement parts. This will ensure that the safety of the product is maintained.
  • Never service damaged battery packs. Service of bat-tery packs should only be performed by the manufacturer or authorized service providers.

Maintenance, Cleaning and Storage

  • Remove dirt on the product or the collection bag with a moist cloth.
  • Never use solvents.
  • Never spray the product with water.
  • Never immerse the product in water.

After-Sales Service and Application Service
Our after-sales service responds to your questions concerning the maintenance and repair of your product as well as spare parts. You can find explosion drawings and information on spare parts at: www.bosch-pt.com The Bosch product use advice team will be happy to help you with any questions about our products and their accessories. In all correspondence and spare parts orders, please always include the 10‑digit article number given on the nameplate of the product.

Great Britain
Robert Bosch Ltd. (B.S.C.) P.O. Box 98 Broadwater Park North Orbital Road Denham Uxbridge UB 9 5HJ At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair.

You can find further service addresses at: www.bosch- pt.com/serviceaddresses

Transport
The recommended lithium-ion batteries are subject to legislation on the transport of dangerous goods. The user can transport the batteries by road without further require-ments. When shipping by third parties (e.g.: by air transport or for-warding agency), special requirements on packaging and labeling must be observed. For the preparation of the item being shipped, consulting an expert for hazardous material is re-quired. Dispatch battery packs only when the housing is undam-aged. Tape or mask off open contacts and pack up the bat-tery in such a manner that it cannot move around in the packaging. Please also observe the possibility of more detailed national regulations.

Disposal

  • The product, batteries, accessories, and packaging should be sorted for environmental-friendly recycling.
  • Do not dispose of the product and batteries/rechargeable batteries into household waste!

Only for EU countries:
According to the European Guideline 2012/19/EU, products that are no longer usable, and according to the European Guideline 2006/66/EC, defective or used battery packs/batteries, must be collected separately and disposed of in an environmentally correct manner. If disposed incorrectly, waste electrical and electronic equipment may have harmful effects on the environment and human health, due to the potential presence of hazardous substances.

Battery packs/batteries: Li-ion:
Please observe the notes in the section on transport (see “Transport”, page 14).

Only for the United Kingdom:
According to The Waste Electrical and Electronic Equipment Regulations 2013 (SI 2013/3113) (as amended) and the Waste Batteries and Accumulators Regulations 2009 (SI 2009/890) (as amended), products that are no longer usable must be collected separately and disposed of in an environmentally friendly manner.

Licenses

Copyright (c) 2018 STMicroelectronics. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

  • Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
  • Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Copyright © 2012–2019 STMicroelectronics
All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

  • Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
  • Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Apache License
Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

Definitions
“License” shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of
this document. “Licensor” shall mean the copyright owner or entity authorized by the copyright owner that is granting the License. “Legal Entity” shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, “control” means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity. “You” (or “Your”) shall mean an individual or Legal Entity exercising permissions granted by this License. “Source” form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files. “Object” form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types. “Work” shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below). “Derivative Works” shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof. “Contribution” shall mean any work of authorship, including the original version of the Work and any modifications or additi-ons to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copy-right owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, “submitted” means any form of electronic, verbal, or written communication sent to the Licensor or its representa-tives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but exclu-ding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as “Not a Con-tribution.” “Contributor” shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.

Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non- exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Ob- ject form.

Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a per-petual, worldwide, non- exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to ma-ke, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.

Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:

  • You must give any other recipients of the Work or Derivative Works a copy of this License; and
  • You must cause any modified files to carry prominent notices stating that You changed the files; and
  • You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attri-bution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and
  • If the Work includes a “NOTICE” text file as part of its distribution, then any Derivative Works that You distribute must inclu-de a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a dis-play generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NO-TICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices wi-thin Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License. You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provi-ded Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.

Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or con-ditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.

Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.

Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwi-se, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contribu-tor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.

Accepting Warranty or Additional Liability. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, de-fend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability. END OF TERMS AND CONDITIONS

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals