Huawei 55020BEE Watch Fit User Guide

Huawei 55020BEE Watch Fit User Guide

Getting Started

Buttons and screen control

• comes with a touchscreen that supports full-screen touch operations (including swiping up, down, left, and right, and touching and holding)

Appearance of the HUAWEI WATCH FIT Series

1. Side button
2. Charging port
3. Monitoring unit area

Pairing with an EMUI/Android phone

1. Install the Huawei Health app ( ).
   If you have already installed the Huawei Health app, go to Me > Check for updates and update it to the latest version.
   If it has not been installed, save the QR code below to an album and scan it to download the app. .
   

2. Open the Huawei Health app, and go to Me > Log in with HUAWEI ID. If you don’t have a HUAWEI ID, please register for one, and then log in.

3. Power on your wearable device, select a language, and start pairing.

4. Place your wearable device close to your phone. Open the Huawei Health app, touch in the upper right corner, and touch Add device. Select the wearable device that you would like to pair your phone with, and touch LINK.
   Alternatively, touch Scan to pair by scanning the QR code displayed on your wearable device.

5. When a Huawei Health app pop-up window appears requesting a Bluetooth pairing, touch Allow.

6. When a pairing request displays on the wearable device, touch √, and follow the onscreen instructions on the phone to complete the pairing.

After the pairing is complete, if you are using a non-HUAWEI phone, open the Huawei Health app, go to the device details screen, touch Troubleshooting , and adjust system settings. This prevents the Huawei Health app from being cleared from the background.

Pairing with an iPhone

1. Install the HUAWEI Health app ( ).
   If you have already installed the app, please update it to its latest version.
   If you haven’t yet installed the app, go to your phone’s App Store and download and install the app. You can also scan the QR code below to download and install the app.
   

2. Open the HUAWEI Health app, and go to Me > Log in with HUAWEI ID. If you don’t have a HUAWEI ID, please register for one, and then log in.

3. Power on your wearable device, select a language, and start pairing.
   a) Place your wearable device close to your phone. Open the HUAWEI Health app on your phone, touch in the upper right corner, and then touch Add device. Select the wearable device that you would like to pair, and touch LINK.
   You can also touch Scan to scan the QR code displayed on the wearable device to initiate pairing.
   b) When the pairing request appears on your wearable device, touch √. When a HUAWEI Health app pop up window appears requesting a Bluetooth pairing, touch Pair.
   Another pop-up window will appear, asking you whether to allow the wearable device to display notifications from your phone. Touch Allow.
   c) Wait a few seconds for the HUAWEI Health app to display a message indicating that the pairing has been successful. Touch Done to complete the pairing.

Managing watch faces

Changing watch faces

• Method 1: Touch and hold anywhere on the home screen until the device vibrates. When the home screen zooms out and shows a preview, swipe left or right to select your preferred watch face and set it.

• Method 2: (HUAWEI WATCH FIT/HUAWEI WATCH FIT new/HUAWEI WATCH FIT mini) On your device, go to Settings > Display > Watch face, and swipe left or right to select your preferred watch face and set it.
  HUAWEI WATCH FIT Special Edition: On your device, go to S ettings > Watch face > Watch **face** , and swipe left or right to select your preferred watch face and set it.

• Method 3: Make sure that your device is linked with the Huawei Health app. Open the Huawei Health app, go to the device details screen, touch Watch faces and then More , select your preferred watch face, and install it. Your device will automatically switch to the selected watch face once it is installed. Alternatively, touch a watch face that you have installed, then touch Set as default to switch to it.

Deleting a watch face

Open the Huawei Health app, go to the device details screen, touch Watch faces , and go to More > Me > Edit, touch the Cross icon in the upper right corner of a watch face to delete it.

Setting custom cards

To add custom cards

1. HUAWEI WATCH FIT/HUAWEI WATCH FIT new/HUAWEI WATCH FIT mini: Go to Settings > Display > Favorites.
   HUAWEI WATCH FIT Special Edition: Go to Settings > Custom cards.

2. Touch and select the cards you would like to display, such as Sleep, Stress , and Heart rate. The cards you see on your device may be different.

3. To view custom cards after adding them, swipe left or right on the home screen.

To move/delete cards

• To move an added card, touch next to the card.
• To delete an added card, touch or x next to the card.

Setting Do Not Disturb

If you are using HUAWEI WATCH FIT Special Edition, perform the following operations to set this mode.

When Do Not Disturb is enabled, your device won’t vibrate when receiving incoming calls and notifications. It will still vibrate if you have set any alarms.

Enabling or disabling Do Not Disturb

Method 1 : Swipe down from the top of the watch face and touch  to enable or disable
it.
Method 2 : Enter the device’s app list, and go to Settings > Do Not Disturb > All day to enable or disable it.

Scheduling Do Not Disturb

• To schedule Do Not Disturb:
  Enter the device’s app list, go to Settings > Do Not Disturb to access the Do Not Disturb settings screen. Then, enable Scheduled , and set your preferred start and end times.

• To disable scheduled Do Not Disturb:

Enter the device’s app list, go to Settings > Do Not Disturb > Scheduled, and disable it.

If you are using the HUAWEI WATCH FIT/HUAWEI WATCH FIT new/HUAWEI WATCH FIT mini, perform the following operations to set this mode:

Swipe down on the device home screen, touch or go to Settings > Do Not Disturb to enable Do Not Disturb mode, and set your preferred start and end times.

Exercise

Starting an individual workout

Using your device to start a workout

1. Enter the device’s app list, and touch Workout ( ).
2. Swipe up or down on the screen and select the workout that you would like to do.
3. Touch a workout icon to start a workout.
4. When the screen is on, press and hold the side button to stop the workout. Alternatively, press the button to pause the workout, touch to resume the workout, or touch to stop the workout.
   • Touch for a workout mode to set goals, reminders, and more.
   • When you finish your workout, you can view the workout data which includes the workout duration, the number of calories you burned, a graph of your heart rate, the change in your heart rate, your average heart rate, and your heart rate zone.

Using the Huawei Health app to start a workout

1. When your device is connected to the Huawei Health app, start a workout (including a
   single workout session and training course) in the app.

2. In the Huawei Health app, touch to pause a workout, touch to resume a workout, and touch and hold to end a workout. The device will pause, resume, or end the workout accordingly.

• During a workout, data such as the workout duration and distance will be displayed in both the Huawei Health app and on your device.
• If the workout distance or duration is too short, no workout data will be recorded.

Viewing workout records

Viewing workout records on your device

1. Enter the device’s app list, and touch Workout records ( ).
2. Select a record and view the corresponding details. The device will display different data types for different workouts.

Viewing workout records in the Huawei Health app
You can also view detailed workout data by going to Health > Exercise records in the Huawei Health app.

Deleting a workout record

Touch and hold a workout record on Exercise records in the Huawei Health app and delete it. However, this record will still be available in Workout records on the device.

Viewing the RAI

This feature is only available on the HUAWEI WATCH FIT Special Edition.

Running ability index (RAI) is a comprehensive index that reflects a runner’s endurance and technique efficiency. It is based on a runner’s best times. In general, a runner with a higher RAI performs better in competitions.

Before you start

• To use this feature, update the device and the Huawei Health app to their latest versions.
• The RAI feature is only available for certain running scenarios, and the running must last for more than 12 minutes.

Viewing the RAI

• On your device:

In the device’s app list, touch Workout status ( ) to view the RAI.

• On your phone:

Open the Huawei Health app, access the Me screen, go to My data > Running Ability Index , and view your fitness data like running ability.

Viewing daily activity data

If you are wearing the device properly, the device will record your activity automatically, including the step count, active distance, and calories burned.

Method 1: View your activity data on the device.

Enter the device’s app list and touch Activity records. You can then view your data including the step count, calories burned, distance covered, active hours, and the duration of moderate to high-intensity activities.

Method 2: View your activity data in the Huawei Health app.
You can view your activity records on the home screen of the Huawei Health app.

The data displayed in the Huawei Health app is collected from both your phone and device.
Therefore, there is nothing to be concerned about if there is a data discrepancy between the app and your wearable device.

• To view your daily activity data in the Huawei Health app, make sure that your device is connected to the app.
• Your activity data resets at midnight.

Health Management

Monitoring your sleep

Make sure that you are wearing your device in the correct manner. The device will automatically record your sleep duration, and identify whether you are in deep sleep, light sleep, or awake.

Sleep settings

Sleep settings are only available on the HUAWEI WATCH FIT Special Edition.

1. Select Sleep ( ) from the app list, swipe up on the screen, and touch Sleep mode.
2. Enable Auto , or touch Add time , set Bedtime, Wake up , and Repeat , and touch OK.
   When Auto is enabled, and the device detects that you are asleep, it won’t vibrate when receiving incoming calls and notifications (except alarms), and will automatically disable the Raise to wake feature and other features, in order to avoid disturbing your sleep.

Enabling/Disabling HUAWEI TruSleep™

The switch for HUAWEI TruSleep™ is toggled on by default.

• Open the Huawei Health app, enter the device details screen, go to Health monitoring > **HUAWEI TruSleep™ , and toggle on or off the switch for HUAWEI TruSleep™. When the switch for HUAWEI TruSleep™** is toggled on, the device can accurately recognize when you fall asleep, when you wake up, and whether you are in a deep sleep, a light sleep, or REM sleep. The watch can then provide you with sleep quality analysis, to help you understand your sleep patterns, and suggestions to help you improve the quality of your sleep.

Viewing your sleep data

• Open Sleep ( ) from the app list on your device to view the night sleep and nap data record.
• Open the Huawei Health app, go to the Health screen, and touch the Sleep card to view your daily, weekly, monthly, and yearly sleep data.
  The recorded data is updated at 00:00 every day.

Measuring SpO2

• To use this feature, update your wearable device and the Huawei Health app to their latest versions.
• To ensure the accuracy of the SpO2 measurement, wear the wearable device snugly and in the correct manner. Make sure that the monitoring module is in direct contact with your skin, free of any obstructions.

Single SpO2 measurement

1. Wear your wearable device in the correct manner, and keep your arm still.
2. Enter the device’s app list, and swipe up or down to find and touch SpO2 ( ).
3. Remember to keep still with the screen facing upward, during SpO2 measurements.

• For more accurate results, it is recommended that you wait three to five minutes after putting the device on before measuring your SpO2.
• This measurement may also be affected by some external factors such as low ambient temperatures, arm movements, or tattoos on your arm.
• The results are for reference only and are not intended for medical use.
• The measurement will be interrupted if you swipe right on the device screen, receive an incoming call, or an alarm goes off.

Automatic SpO2 measurements

1. Open the Huawei Health app, go to the device details screen, touch Health monitoring ,
   and toggle on the switch for Notifications. The device will then automatically measure and record your SpO2 when it detects that you are still.

2. Touch Low SpO₂ alert to set the lower limit of your SpO2 for you to receive a vibration alert when you are not asleep.

Viewing data

Open the Huawei Health app, touch SpO₂ , and select a date to view the SpO2 measurement data on that day.

Measuring your heart rate

• This measurement may also be affected by some external factors such as low ambient temperatures, arm movements, or tattoos on your arm.
• Keep still and make sure the device fits relatively tightly during the measurement, but avoid wearing it directly over your wrist bone. Ensure that the heart rate sensor is in contact with your skin and that there are no foreign objects between your skin and the device. The screen also needs to stay facing up.

Individual heart rate measurement

1. Open the Huawei Health app, go to the device details screen, go to Health monitoring > Continuous heart rate monitoring , and toggle off the switch for Continuous heart rate monitoring.
2. Enter the device’s app list and select Heart rate to measure your heart rate.

Continuous heart rate measurement

1. Open the Huawei Health app, go to the device details screen, go to Health monitoring > **Continuous heart rate monitoring , and toggle on the switch for Continuous heart rate monitoring**.
2. View your heart rate:
   • Enter the device’s app list and select Heart rate to view your heart rate.
   • In the Huawei Health app, go to Me > My data > Heart, and view your heart rate.

Resting heart rate measurement

The resting heart rate refers to the heart rate measured in a quiet, inactive, and non-sleep state. The best time to measure the resting heart rate is after you wake up (and before getting up) in the morning.

1. Open the Huawei Health app, enter the device details screen, go to Health monitoring > Continuous heart rate monitoring , and toggle on the switch for Continuous heart rate monitoring. The device will then automatically measure your resting heart rate.
2. In the Huawei Health app, go to Me > My data > Heart > Resting heart rate, and view your resting heart rate at a specific time.

• The resting heart rate data displayed in the Huawei Health app will not change after you disable Continuous heart rate monitoring.
• The resting heart rate data on the device will be cleared automatically at 00:00 AM.
• If “- -” is displayed as the resting heart rate reading, it indicates that the device was unable to measure your resting heart rate.

High or low resting heart rate alert

If you are resting for 30 minutes and your heart rate stays above or below the set limit for over 10 minutes, your device will vibrate and display a message letting you know that your heart rate is too high or low. You can swipe right on the screen or press the side button to clear the message.

1. Open the Huawei Health app, enter the device details screen, go to Health monitoring > **Continuous heart rate monitoring, and toggle on the switch for Continuous heart rate monitoring.**
2. Touch High heart rate alert to set the upper limit for the high heart rate alert, or touch Low heart rate alert to set the lower limit for the low heart rate alert.

Heart rate measurement for a workout

During a workout, the device displays your real-time heart rate and heart rate zone, and notifies you when your heart rate exceeds the upper limit. For better training results, you are advised to do a workout based on your heart rate zone.

• To choose the calculation method for heart rate zones, open the Huawei Health app, go to Me > Settings > Workout settings > Exercise heart rate settings, and set Heart rate **zones to Maximum heart rate percentage, HRR percentage, or LTHR percentage for running, or either Maximum heart rate percentage or HRR percentage** for other workout modes.
• Heart rate measurement during a workout: You can view the real-time heart rate on the device when you start a workout.

 • Your heart rate will not be displayed if you remove the device from your wrist during the workout. However, it will continue to search for your heart rate signal for a while. The measurement will resume once you put the device back on.
• You can view graphs that show the changes in your heart rate, maximum heart rate, and average heart rate for each workout from workout records in the Huawei Health app.

Workout high heart rate alert

During a workout, if your heart rate exceeds the preset upper limit for a certain period of time, your device will vibrate and notify you that your heart rate is too high, until your heart rate drops below the upper limit or you swipe right to clear the notification.

• iOS users: Open the Huawei Health app, go to Me > Settings > Workout settings > **Exercise heart rate settings , toggle on the switch for Heart rate warning , touch Heart rate limit** , and set an upper limit that is suitable for you.
• HarmonyOS and Android users: Open the Huawei Health app, go to Me > Settings > **Workout settings > Exercise heart rate settings, toggle on the switch for High heart rate , touch Heart rate limit,** and set an upper limit that is suitable for you.

Heart rate alerts are only available during workouts and are not generated during daily monitoring.

Testing stress levels

Wear the device correctly and keep your body still during the stress test.

• Single stress test:
  Open the Huawei Health app, touch the Stress card, and touch Stress test to start a single stress test. Touch Calibrate and follow the onscreen instructions to calibrate the stress level.

• Periodic stress test:

Open the Huawei Health app, go to the device details screen, go to Health monitoring > **Automatic stress test, toggle on the switch for Automatic stress test** , and follow the onscreen instructions to calibrate the stress level. Periodic stress tests will then automatically start when you wear the device correctly.

The accuracy of the stress test may be affected if the user has just taken substances with caffeine, nicotine, or alcohol, or psychoactive drugs. It may also be affected when the user suffers from heart disease or asthma, has been exercising, or is wearing the device incorrectly.

Viewing stress data

• On the device:
  Enter the app list, and touch Stress ( ) to view your daily stress change, including the
  stress bar chart and specific stress levels.

• In the Huawei Health app:
  You can see your latest stress scores and level on the Stress card. Touch the card to view your daily, weekly, monthly, and yearly stress curves, and corresponding advice.

The device is not a medical device and the data is for reference only.

Breathing exercises

Enter the device’s app list, touch Breathing exercises ( ), set the duration and rhythm, touch the breathing exercises icon on the screen, and follow the onscreen instructions to do the breathing exercises.

After the exercise is finished, the screen will display data such as the heart rate before the exercise, exercise duration, and evaluation.

Assistant

Setting style watch faces

You can create personalized watch faces based on the outfit you’re wearing.

• This feature is currently not supported on iPhones.
• This feature is only available on the HUAWEI WATCH FIT Special Edition.

1. Open the Huawei Health app, go to the device details screen, touch the Watch faces
   card, and go to More > Mine > Style.

2. Touch + in the lower left corner, and upload a photo of your outfit by either taking a photo using Take photo or selecting one from your Gallery.

3. Multiple watch faces will be generated based on the elements in the photo. Select your favorite option, and touch Save to set it as the current watch face.

Setting alarms

You can set alarms using either your device or the Huawei Health app on your phone.

Setting an alarm on your device

1. Enter the device’s app list, touch Alarm ( ), and touch to add an alarm.
2. Set the alarm time and specify whether you would like the alarm to be repeated, and then touch OK. If you do not select repetitions, the alarm will be a one-time alarm.
3. Touch an alarm to modify the alarm time, its repetitions, or to delete it.

Setting an alarm in the Huawei Health app

1. Open the Huawei Health app, go to the device details screen, and touch Alarm.
2. Touch Add to set the alarm time, alarm name, and repeat cycle.
3. If you are an Android or EMUI user, touch √ in the upper right corner. If you are an iOS user, touch Save.
4. Swipe down on the Huawei Health home screen to make sure that the alarm settings are synced to the device.
5. Touch an alarm to modify the alarm time, the name, and its repetitions.

Remote shutter

• HUAWEI WATCH FIT Special Edition: This feature is available on HUAWEI phones running EMUI 8.1 or later and on iPhones running iOS 13.0 or later. When paired with an iPhone running a compatible version, you need to open the camera on the iPhone first.
• HUAWEI WATCH FIT/HUAWEI WATCH FIT new/HUAWEI WATCH FIT mini: This feature is available on HUAWEI phones running EMUI 8.1 or later.
• To use this feature, make sure that the Huawei Health app is running in the background.

1. Make sure that your wearable device is connected to your phone via Bluetooth and the
   Huawei Health app is running properly.

2. Enter the device’s app list, and select Remote shutter ( ). This will open the Cameraapp on your phone at the same time.

3. Touch on the device screen to remotely control your phone to take photos. Swipe right on the screen or press the side button to close Remote shutter.

Controlling music playback

1. Open the Huawei Health app, go to the device details screen, touch Device settings , and toggle on the switch for Music playback control.
2. After a song is played on your phone, touch Music in the device’s app list to pause or resume music playback, switch to the previous or next song, and adjust the volume.

Managing messages

When the Huawei Health app is connected to your wearable device, and the message notifications are enabled, messages pushed to the status bar of your phone can be synced to your wearable device.

Enabling message notifications

1. Open the Huawei Health app, go to the device details screen, touch Notifications , and
   toggle on the switch for Notifications.

2. Go to the app list and toggle on the switches for the apps that you wish to receive notifications from.

Go to APPS to view the list of apps that you can receive notifications from.

Viewing unread messages

Your wearable device will vibrate to notify you of new messages pushed from the status bar of your phone.

Unread messages can be viewed on your wearable device. To view them, swipe up on the home screen to enter the unread message center.

Replying to SMS messages

• This feature is only available on the HUAWEI WATCH FIT Special Edition.
• This feature is not supported on iPhones.
• This feature is only supported when replying to an SMS message with the SIM card that has received the message.

When receiving an SMS message on your wearable device, you can swipe up on the screen and select a quick reply.

Customizing quick replies

• This feature is only available on the HUAWEI WATCH FIT Special Edition.
• This feature is not supported on iPhones.

You can customize a quick reply as follows:

1. Once your wearable device is connected to the Huawei Health app , open the app, go to the device details screen, and touch the Quick replies card.
2. You can touch Add reply to add a reply, touch an added reply to edit it, or touch next to a reply to delete it.

Deleting unread messages

Swipe up on the home screen of your wearable device to enter the unread message center, and touch at the bottom of the message list to clear all unread messages.

Flashlight

Enter the app list, and touch to enable the screen to light up. You can touch the screen to turn off the flashlight, touch the screen again to turn it back on, and swipe right on the screen or press the side button to exit.

The flashlight turns on for five minutes by default.

Finding your phone

If your wearable device and phone are within the Bluetooth connection range, swipe down on the wearable device’s home screen and touch or touch Find Phone in the app list.
The Find phone animation will be played on the wearable device screen, and your phone will play a ringtone to help you locate it. Touch the wearable device screen to stop finding your phone.

• Make sure that your wearable device is connected to your phone via the Huawei Health app, your phone is powered on, and the Huawei Health app is running.
• Your phone will play a ringtone (even in Vibrate or Silent mode) to help you locate it.

Receiving weather reports

Enabling weather reports

Open the Huawei Healt h app, go to the device details screen, enable Weather reports , and select a temperature unit (°C or °F).
You can manually refresh the weather information, by swiping down on the home screen of the Huawei Health app or opening the Weather app on your device. In normal cases, weather information will be updated regularly.

Viewing weather information

Through the Weather card

Swipe right or left on the screen until you find the Weather card, where you can check your location, the weather, temperature, and more.

Through the Weather app

On the home screen, press the side button and select Weather. You can view information such as your location, the weather, and temperature on the screen. Swipe up or down on the screen to view more weather information.

• Make sure that GPS is enabled on your phone, the Huawei Health app is allowed to obtain your location information, and that your phone is in an open area with GPS reception.
• The weather information displayed on the device may differ slightly from that displayed on your phone, as the information is collected from different weather service providers.

More

Charging

Connect the metal contacts on the charging cradle to those on the back of your device, place the charging cradle and your device on a flat surface, and connect the charging cradle to a power supply. The screen will turn on and display the battery level.

• It is recommended that you use a HUAWEI charging cradle and adapter or a charging cradle and adapter that comply with relevant safety regulations and standards, when charging your device. Chargers and power banks that do not meet relevant safety standards may cause issues such as slow charging or overheating. Please exercise caution when using such devices. To guarantee the authenticity of your HUAWEI charging cradle and adapter, it is recommended that you purchase them from an official Huawei sales outlet.
• The charging cradle is not water-resistant. Make sure that the port, the metal contacts, and your device remain dry during charging.
• Keep the surface of the charging cradle clean. Make sure the device is placed correctly on the charging cradle and that the charging status is displayed on the device screen. Avoid bringing metal objects into contact with the metal contacts on the charging cradle, as doing so can lead to short circuiting and other risks.
• When the charging icon displays 100%, the device has been fully charged and has automatically stopped charging. Remove the device from the charging cradle and disconnect the power adapter.
• If the device is idle for a long time, remember to charge the battery once every two to three months, to extend the battery lifespan.
• Batteries have a limited number of charge cycles. When the battery life becomes noticeably shorter, you can go to an authorized Huawei Customer Service Center to have the battery replaced.
• Do not charge or use your device in a hazardous environment, and make sure that there is nothing flammable or explosive nearby. Before using the charging cradle, make sure there is no residual liquid or any other foreign object on the charging cradle’s USB port. Keep the charging cradle away from liquids and flammable materials. Do not touch the metal contacts of the charging cradle when it is connected to a power supply.
• The charging cradle has a magnet interior. If the magnet repels the charging port, switch the direction of the charging port. The charging cradle’s magnetism tends to attract metal objects. It is recommended that you check and clean the charging cradle before use.
• Do not expose the charging cradle to high temperatures for an extended period of time, or to sources of strong electromagnetic interference, as this may cause it to demagnetize or cause other issues.

Viewing the battery level

Method 1: Swipe down from the top of the home screen to check the battery level.
Method 2: Connect your device to a power supply, and check the battery level on the charging screen.

Method 3: Check the battery level on a watch face that displays the battery level.
Method 4: When your device is properly connected to the Huawei Health app, open the Huawei Health app, go to the device details screen, and view the battery level.

Low battery alert

When the battery level falls below 10%, your device will vibrate to notify you of the low battery level and prompt you to charge your device as soon as possible.

Setting the AOD watch face

The AOD watch face is only available on the HUAWEI WATCH FIT Special Edition.
Enabling the AOD watch face will reduce the battery life of your device.

Once you have set the AOD watch face, you can choose whether to see the main watch face or AOD watch face when you raise your wrist.

1. Open the app list, go to Settings > Watch face, and enable Always On Display.
2. Select Raise to show AOD or Raise to show watch face depending on your preference.

Setting the Standby watch face

The Standby watch face is only available on the HUAWEI WATCH FIT/HUAWEI WATCH FIT new/HUAWEI WATCH FIT mini.

Once you set a Standby watch face, the watch face screen will stay on even when your watch enters standby mode. To set a Standby watch face, perform the following:

1. On the home screen of your device, press the side button, go to Settings > Display > Always On Display, swipe left or right on the screen to preview the watch faces, and then touch or touch the selected watch face to set it.

2. If the screen-off time has not been set for the device, and no operations are performed on the screen, the Standby watch face will display after 5 seconds. When you perform an operation on the screen, the Standby watch face will be displayed 15 seconds after the operation is complete.
   If the screen-off time has been set for the device, the time when the Standby watch face is displayed will depend on the screen-off time.

3. When the device enters Standby mode, touch the Standby watch face to go to the home screen.
   • Only the preinstalled Standby watch faces can be set.
   • When the watch detects that the user is not wearing the watch or is sleeping, the Standby watch face screen will turn off.
   • Enabling the Standby watch face feature will reduce the battery life of your device and disable the Raise to wake feature.

Configuring Gallery watch faces

Before using this feature, update the Huawei Health app and your device to their latest versions.

Selecting Gallery watch faces

1. Open the Huawei Health app, go to the device details screen, and go to More > Mine > On watch > Gallery to access the Gallery watch face settings screen.
2. Touch +, and select either Take photo or Gallery as the method for uploading an image.
3. Touch √ in the upper right corner, and then touch Save. Your device will then display the selected image as the watch face.
   When you upload more than one image, you can tap on the watch face to switch between them.

Other settings

On the Gallery watch face settings screen on your phone:

• Touch Style and Position to set the style and display position of the date and time on your Gallery watch face.
• Touch the Cross icon in the upper right corner of a selected photo to delete it.

Water-resistant and dust-resistant level definition and usage scenario

description of wearable devices

Being water-resistant and dust-resistant means that the wearable device prevents water and dust from entering inside and damaging the interior components and the mainboard.

In the following test scenarios, the normal temperature ranges from 15°C to 35°C, the relative humidity ranges from 25% to 75%, and the atmospheric pressure ranges from 86 kPa to 106 kPa (the standard atmospheric pressure is 101.325 kPa).

Water-resistance is not permanent and it may be affected to some extent over time. The following conditions may affect the water-resistance performance of the wearable device and should be avoided. Damage caused by immersion in liquid is not covered by the warranty.
The device being dropped from a high place or impacted by other objects.
Dismantling or repairing the wearable device at a non-authorized Huawei store.
Exposing the device to alkaline substances, such as soap or soapy water during showers or baths.
Exposing the device to perfumes, solvents, detergents, acidic substances, pesticides, emulsions, sunscreens, moisturizers, or hair dye.
Pressing the buttons of the device or using it underwater.

Charging the device when it is wet.

The water-resistant and dust-resistant features are only applicable for the watch body.
Other components such as the strap, charging base, and base are not water- resistant or dust-resistant.
Please use the product in accordance with the product manual provided on the official
Huawei website or Quick Start Guide that comes with the product. Free warranty services are not provided for damage caused by improper use.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>