Park Royal WL401722TSH Close Coupled Traditional High Level Toilet User Manual

Table of Contents

Product Information

Before installation, ensure that the seat is not opened beyond 105 degrees. If accidentally opened beyond this angle, insert one of the seat hinge pins into the visible hole and rotate the barrel back round until the other hole is visible.
If you can access the underside of the fixing holes on the toilet pan, loosely fit the brackets using the top fixings.
Otherwise, use the bottom fixings for standard pans.
Align the seat with the hinges and lift it upright while ensuring that the hinges do not move. Then, fully push and release the center button to detach the seat from the hinges.
Tighten the hinges securely in position.
Attach the metal covers over the hinges and re-attach the toilet seat.

Note: For cleaning instructions and utilizing the quick-release function to remove the seat, refer to step 3 in the provided instructions.

High lever Flush Pipe kit

To retain the best quality finish, clean product with a soft cloth and a mild soap solution.
Do not use abrasive or chemical cleaners as they may damage the surface of the toilet seat or hinges.
Spray cleaning liquids onto the cloth and not directly onto the product.
Take care when cleaning the toilet pan with chemical cleaners. Avoid contact of the chemical cleaners with the toilet seat or hinges. Immediately rinse off any splashes to avoid damage or discolouration to the surface of the toilet seat and hinge parts.
Please do not open beyond 105 degrees before installation. If you accidentally do this, please insert one of the seat hinge pins into the visible hole and rotate the barrel back round until the other hole is visible.

Loosely fit the brackets to the pan using either the top or bottom fittings.
Use top fixings
if you cannot access the underside of the fixing holes on the toilet pan.
Attach the seat onto the hinges and adjust to fit your toilet pan.
Once aligned, lift the seat upright whilst ensuring the hinges do not move. Then fully push and release the centre button and lift the seat away from the hinges.
Fully tighten the hinges in position.
Place the metal covers over the hinges and re-attach the toilet seat.

Look to step 3 for instructions on how to utilise the quick release function which allows you to remove the seat for cleaning.

Croydex, Central Way, Andover,Hampshire, SP10 5AW, UK

+44 (0) 1264 365881
+44 (0) 1264 356437

Read User Manual Online (PDF format)