BULL Grills 13700 Premium Outdoor Rated Refrigerator Instruction Manual

BULL Grills 13700 Premium Outdoor Rated Refrigerator

Product Information:

Item No.: 13700
Revised Date: 1/7/2019
Version: 2
Version Date: 10/2019

Product Usage Instructions

1. Ensure that you have the necessary items for usage.
2. Carefully unpack the product and remove any packaging materials.
3. Inspect the product for any visible damages or defects.
4. Refer to the user manual for detailed instructions on product assembly, if required.
5. Connect the necessary cables or accessories to the appropriate ports or connectors.
6. Power on the product using the designated power button or switch.
7. Follow the on-screen prompts, if applicable, to set up the product.
8. Refer to the user manual for information on product features and functions.
9. Ensure proper maintenance and cleaning of the product as per the user manual.
10. If you encounter any issues or difficulties, refer to the troubleshooting section of the user manual or contact customer support for assistance.
11. When not in use, store the product in a safe and dry place to prevent damage.

Please note that the text-extract provided above does not contain specific information about the product or its usage. For further assistance, please refer to the complete user manual or contact customer support.

PREMIUM OUTDOOR RATED REFRIGERATOR
ITEM NO. 13700

INSTRUCTION MANUAL
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.
Write Serial No. (on upper left corner of inside cabinet) here:

APPLIANCE SAFETY

Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety message.
This is the Safety Alert Symbol. The symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the word DANGER or WARNING.

DANGER means that failure to heed this safety statement may result in severe personal injury or death.

WARNING means that failure to heed this safety statement may result in extensive product damage, serious personal injury, or death.

All safety messages will alert you about the potential hazard, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.

IMPORTANT SAFEGUARDS

Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precautions, including the following:

DANGER

• Plug into a grounded 3 prong outlet, do not remove grounding prong, do not use an adapter, and do not use an extension cord.
• Replace all panels before operating
• It is recommended that a separate circuit serving only your appliance be provided. Use receptacles that cannot be turned off by a switch or pull chain
• Never clean appliance parts with flammable fluids. These fumes can create a fire hazard o explosion.
• And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
• Do not connect or disconnect the electric plug when your hands are wet.
• Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in electrical shock or death.
• Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

WARNING

FOLLOW WARNING CALLOUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
Use two or more people to move and install appliance. Failure to do so can result in back or other injury.To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed.

• Choose a well-ventilated area with temperatures above 50 F (10 C) and below 109.4 F (43 C).
• The appliance should not be located next to ovens, grills or other sources of high heat.
• The appliance water and drain connection plumbing must be installed in accordance with with state and local plumbing code requirements.
• This appliance electrical supply must be installed and properly grounded in accordance with National Electrical Code, land ordinances. Rated Voltage is 115VAC/1 PH/60Hz Rated Current is 1.3 Amps
• The size of the fuse (or circuit breaker) should be 1. 3 amperes.
• It is important that the appliance be leveled in order to work properly.

You may need to make several adjustments to level it.

• Make certain that the electric power supply, water and drain pipes are not pinched,kinked or damaged during installation. Check for leaks after connection.
• Do not use solvent-based cleaning agents or abrasives on the interior as they may damage or discolor the interior.
• Use this appliance only for its intended purpose as described in this Instruction Manual.
• Keep fingers out of the “pinch point areas like small clearance between the door and the cabinet. Be careful closing the door when children are present.
• Never allow children to operate, play with or crawl inside appliance.

DANGER
Risk of child entrapment!
Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous, even if they will “just sit for a few days”.
Before discarding your old refrigerator:

Take off the doors
Leave the shelves in place so that children may not easily climb inside.
– SAVE THESE INSTRUCTIONS –

LOCATION OF PARTS

INSTALLATION INSTRUCTIONS

BEFORE USING YOUR APPLIANCE

• Remove the exterior and interior packing.
• Before connecting the appliance to the power source, let it stand upright for approximately 2 hours.
• This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• Install the handle on the door, if it is not already attached (See page 7.)

INSTALLATION OF YOUR APPLIANCE

The appliance is designed for built-in recessed or free-standing installation.
Note: This appliance is not intended to be used to store medicine and other medical products.

Please make sure that the front Air Vent is clear of debris and not covered to prevent damage to the unit.
Note: It is recommended that you do not install the appliance near an oven, radiator or other heating source. And heat sources may increase electrical consumption. Don’t install in a location where the temperature will fall below 50 °F (10°C). For best performance, do not install the appliance behind a cabinet door or block the base grille. Avoid locating the unit in moist areas Plug the appliance into an exclusive, properly grounded wall outlet.

ELECTRICAL CONNECTION

WARNING

• Improper use of the grounded plug can result in the risk of electrical shock. if the power cord is damaged have it replaced or a cua med electrician or an au none service center This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a hree -oron oluo which mates win stancard free-prong wall outess to minimize the possibility of electrical shock.
• Do not under any circumstances cut or remove the third (ground) prong from the power cord supplied. For persona satev. inis appliance must be properly crounded. Any questions concerning power and/or grouncino should be directed toward a certihed elecncian or an auinonzed service center
• This appliance requires a standard 115/120 Volt AC – 60Hz three-prong grounded electrical outlet. Have he wal outer and arcul checked oy a calmed elecincan to make sure the outers are properly grounded
• When a standard 2 -prong wall outlet is encountered, it is your responsibility and obligation to have it redlaced win a properly crounded s-orono wall outed
• To prevent accidental injury the cord should be secured behind the appliance and not left exposed or chanelso
• The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevents overloading house wiring circuits that could cause a fire hazard from overheating. Never unplug the appliance by pulling on the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.
• When moving the appliance, be careful not to damage the power cord.

EXTENSION CORD
Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must use an extension cord it is absolutely necessary that it be a ULCUL-Listed, 3-wire grounding type appliance extension cord having a grounding to lug and outlet and that the electrical rating of the cord be 115 volts and at least 1.3 amperes.

REVERSING THE DOOR SWING OF YOUR APPLIANCE
This unit has the capability of the door opening from either the left or right side. The unit is delivered to you with the door opening from the left side. Should you desire to reverse the opening direction, please follow the reversal instructions shown below.

NOTE: All parts removed must be saved to allow the door swing to be reversed.

Door parts

Included parts

• A. Take out two hex keys from a bag in cabinet.
  Insert the small hex key 1 to the axes 2.

• B. Rotating the axes  2 by clockwise.

• C. Use the big hex key 3 to push the pin 4 until you can take out the pin by hand.

• Remove the top right screws 5 from right top hinge 6 . Gently pull down the door and place it on a padded surface to avoid the risk of damage.

• Transfer the top left screws 7 to cover the top right holes.

• To hang the axes 2 to the opposite and put the caps 8 and 9 to cover the holes 10 and 11 at the same time.

• Place the axes 2 on the left hinge plate.

• Screw the alternative left top hinge 2 included in the fitting, onto the left hand side of cabinet and tighten it after the door is leveled.

  • A Use the small hex key 1 to rotate the 2 axes anticlockwise.
  • B Insert the pin 4 when you get the desired intensity for self-closing.

INSTALLING THE STAINLESS STEEL HANDLE

This appliance includes a stainless steel handle that is not required to operate the unit. To install the handle, follow the instructions below:
1. Take out the screws and big hex key from bag in cabinet, put the screws on the top of door where the handle is to be installed.
2. Align the handle with the screws, tighten the screws using the big hex key until the handle is both flush and secured tightly against the door side. (DO NOT over-tighten as this may cause damage to the door surface.)

OPERATING YOUR APPLIANCE

It is recommended that you install the appliance in a place where the ambient temperature is between 50° and 109.4°F (10°C- 43°C). If the ambient temperature is above or below recommended temperatures, the performance of the unit may be affected. For example, placing your unit in extremely cold or hot conditions may cause interior temperatures to fluctuate. The operating temperature range may not be reached.

CONTROL PANEL

ON/OFF Power
To turn the appliance ON or OFF, press and hold the POWER key for 5 seconds.

UP and DOWN
Press first then press or button to increase(warm) or decrease(cool) the set temperature by 1°C/1°F.
Press again, the temperature is selected and shows the actual temperature. If no other further operation in 6 seconds, display will show actual temperature in the cooler.

°C/F Selector
Selects the temperature display setting in Fahrenheit or Celsius degrees. To change the temperature from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and at the sametime, then hold for 6 seconds.

Setting the Temperature Control

The temperature you are setting will increase by one degree each time you press the A key, and will decrease by one degree each time you press the key.
The range of the temperature control is from 34°F to 68°F.
To view the set temperature at any time, press the key. The set temperature will flash in the display window for 6 seconds. After 6 seconds, the temperature inside the unit will reappear in the display window.
(The temperature preset at the factory is 34°F).

Interior Light
The unit is equipped with an interior LED light which will be turned ON when the door is open.
And the interior fan is stopped at the same time.
You can press manually to turn on or turn off the light.

DEFROSTING
The unit defrosts automatically in normal operating conditions.
The evaporator behind the rear wall of the unit defrosts automatically. The condensate collects in the drainage channel behind the rear wall of the unit, and flows through the drainage hole into the drip tray by the compressor where it evaporates.
However, frost may accumulate on the evaporator if the unit is repeatedly opened in a high heat or high humidity location. If this frost pattern does not clear within 24 hours, your unit will require manual defrosting.
Press and hold for 6 seconds, the unit will be defrosted.
To stop defrost, please repeat the same interaction.

TEMPERATURE ALARM / DOOR ALARM

An audible alarm sounds if the storage temperature is not cold enough. The temperature display flashes at the same time.

The cause of the temperature being too high may be:

• Warm fresh food was placed inside
• Too much warm ambient air flowed in when rearranging and removing stored items
• Power failure for some time
• The appliance is faulty

The audible alarm is automatically silenced and the temperature display stops flashing when the temperature is sufficiently cold again.
If the door has been left open for more than 60 seconds, the alarm will sound. Pressing any key once can switch off the audible alarm.

DOOR LOCK
Your unit is provided with a lock and key combination.
The keys are located inside the plastic bag that contains the Instruction Manual. Insert the key into the lock and turn it counter-clockwise to unlock the door. To lock the door , do the reverse operation, making sure the metal pin is engaged completely. Remove the key and put it in a secure place for safekeeping.

PREPARATION
Position the Shelf-Supports inside the racks on the sides as illustrated below, at your required level, and then place the shelves firmly on the supports.

SHELVES
To prevent damaging the door gasket, make sure to have the door all the way open when pulling the shelves out of the Shelf-Supports.
Any of the shelves can be removed to store larger items.
When removing the shelf out of the Shelf-Supports, make sure to remove all items first.

CARE AND MAINTENANCE

CLEANING YOUR APPLIANCE

Turn off the power, unplug the appliance, and remove all items, including shelves.

• Wash the inside surfaces with a solution of warm water and baking soda (about 2 tablespoons of baking soda to a quart of water).
• Wash the shelves with a mild detergent solution.
• Wring excess water out of the sponge or cloth when cleaning the area where the controls are located or any electrical parts.
• Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth.
• Use an approved stainless steel cleaner to clean the door and handle. Do not use steel wool or a steel brush on the stainless steel.

CAUTION:
Failure to unplug the appliance during cleaning could result in electrical shock or other personal injury.

POWER FAILURE
Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect the contents.

VACATION TIME
Short vacations: Leave the appliance operating during vacations of less than three weeks.
Long vacations: If the appliance will not be used for several months, remove all items and turn off the appliance. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly, blocking it open if necessary.

MOVING YOUR APPLIANCE

1. Remove all items.
2. Securely tape down all loose items (shelves) inside your appliance.
3. Turn the adjustable legs up to the base to avoid damage.
4. Tape the door shut.
5. Be sure the appliance stays secure in the upright position during transportation. Also protect the outside of the appliance with a blanket or similar item.

ENERGY SAVING TIPS

The appliance should be located in the coolest area of the room or outdoor location, away from heat – producing appliances and out of direct sunlight.
Ensure that the unit is adequately ventilated. Never cover air vents.
Do not keep the door open any longer than necessary.
Let hot foods cool to room temperature before placing in the unit. Overloading the unit forces the compressor to run longer.
Be sure to wrap foods properly, and wipe containers dry before placing them in the unit. This cuts down on frost build up inside the unit.
Unit shelves and storage bins should not be lined with aluminum foil, wax paper or paper toweling.
Liners interfere with cold air circulation, making the unit less efficient.
Organize and label stored items to reduce door openings and extended searches. Remove as many items as needed at one time, and close the door as soon as possible.

TROUBLESHOOTING GUIDE

Many common problems can be solved using the suggestions below, thus avoiding costly service calls.

If you’ve checked the table above and find that you still need help with your appliance, call our Customer Service facility at 1800-521-28556 or Contact@bullbbq.com. We will do our best to answer your questions.

PARTS LIST

MODEL # 13700 PREMIUM OUTDOOR REFRIGERATOR WARRANTY PERIOD FOR ALL PARTS IS ONE YEAR

HOW TO ORDER REPLACEMENT PARTS

Please refer to the parts list on this page.

To make sure vou obtain the correct replacement parts for your premium outdoor refrigerator, the following information is required to assure getting the correct part.

1. Reference number of replacement part needed.
2. Description of replacement part needed.
3. Quantity of parts needed.

IMPORTANT: Use only factory authorized parts. The use of any part that is not factory authorized can be dangerous. This will also void your warranty.

IMPORTANT: Keep this installation and operating instruction manual for referral, and for replacement parts ordering.

EXPLODED ILLUSTRATION

Warranty Policy

Bull Outdoor Products continues to be the industry’s leader in Warranty Durations with our product line.
Warranty Durations can be located in the Parts Section of each manual. Components such as doors, drawers, and non-mechanical items are covered under a one year warranty from the date of purchase on invoice or purchase order.
Warranty Claims must be filed on line through the Bullbbq.com Website. Warranty Claims will not be accepted via email, fax, or phone.
Bull Outdoor Products, Inc. warrants to the original purchaser at the original site of delivery with proof of purchase of each Outdoor Gas Grill that when subject to normal residential use, it is free from defects in workmanship and materials for the periods specified below. This warranty excludes grills used in rental or commercial applications. It does not apply to rust, corrosion, oxidation, or discoloration, which may occur due to moisture, overheating, or packaging, unless the affected product becomes inoperable.
Warranty Claims do not include shipping charges of items), labor or any labor related charges. There will be a shipping and handling charge for the delivery of the warranty parts).
Our obligation under this warranty is limited to repair or replacement, at our option, of the product during the warranty period. The extent of any liability of Bull Outdoor Products, Inc., under this warranty is limited to repair or replacement. This warranty does not cover normal wear of parts, damage resulting from any of the following: negligent use or misuse of the product, use on improper fuel/gas supply, use contrary to operating instructions, or alteration by any person other than our factory service center. The warranty period is not extended by such repair or replacement.

Product repair as provided under this warranty is your exclusive remedy. Bull Outdoor Products, Inc. shall not be liable for any incidental or consequential damages for breach of any express or implied warranty on its products. Except to the extent prohibited by applicable law, any implied warranty or merchantability or fitness for a particular purpose on this product to the duration of the above warranty.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights, which vary from state to state.
Based on country or geographical area, the following methods are used to file a Warranty Claim:

Unite sates on Amerisupporanarrant Central America / United States of America / Canada
South America

https://www.bullbbq.eu/en/warrantyform.htm
Belgium /GermanyNorwayFrance / Latvia/Portugal Denmark / Malta /Romania Italy/ Netherlands/ Spain//Switzerland
United Kingdom
Mail= Exim International PTY LTD PO Box 70 Helensvale, Queensland 4212 Australia
Australia

References

• Customizable Outdoor Kitchens & Stainless Steel Grills - Bull BBQ
• Support & Warranty | Bull BBQ Official Website

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>