YENKEE YHP 3040 Virtual 7.1 VECTOR Gaming Headset User Guide
- June 12, 2024
- YENKEE
Table of Contents
**YHP 3040
Virtual 71 VECTOR gaming headset
**
Headset connection:
Using one of the supplied cables, plug the USB-C terminal in the headset, then plug the ather terminal in the relevant port on the device to be used with the headset. The headset will be connected and ready for full use immediately.
Detachable microphone:
Insert the microphone in the relevant headset socket, then twist in the direction marked by the arrow to lock the microphone and prevent it from falling out.
Controlling the headset on the headphone pad:
On the left headphone pad, you will find a rotary volume control and a
microphone switch.
To operate, please follow the attached icons.
Magnatic exchangeable headphone caps:
The heaphone pad outer caps are attached magnetically and can be exchanged for the second pair supplied in the package. On the bottom of the cag, you will find a small notch allowing the cap to be simply detached from the headset with your finger. Just put the new cap near the magnets and it will attach by itself.
Self-adjusting headband:
The elastic headband will accommodate to your head’s shape and size as well as
the headset wearing style, however, it can be loosened or tightened to your
taste. You will find a velcra Opening on each side of the top. Just open it,
adjust ta your taste and close again.
Notice: The virtual 71 sound feature is only enabied if the headset is
connected via USB. If connected via the 3.5mm jack, this feature is disabled
due to the insufficient current supply. Before first use, be sure to read the
safety instructions contained in this user’s manual carefully.
Headphone specifications:
Loudspeaker @: 50 mm (Neadymiurn magnets] Frequency response: 2D Hz – 20 kHz
Nominal impedance: 32 + 15%
Nominal input power: 55 mW (5V DC / 110mA)
Nominal impedance of the microphone: 2.2 kiloohms
Microphone sensitivity: -38 +/- 3 dB
Weight: 302 g
Cable length: 21m
Connection: USB-C connectar or 9.5 mm jack
Clean with a cloth moistened with water.
The manufacturer takes no responsibility for damages resulting from incorrect
use of the product.
Instructions and information regarding the disposal of used packaging
materials Dispose of packaging material at a public waste disposal site.
Disposal of used electrical and electronic appliances
The meaning of the symbol on the product, its accessory or packaging indicates
that this product shall not be treated as household waste. Please, dispase of
this product at your applicable collection point forthe recycling of
electrical & electronic equipment waste. Alternatively in some states of the
Eurapean Union or other European states you may return your products to your
local retailer when buying an equivalent new product.
The correct disposal of this product will help save valuable natural resources
and help in preventing the potential negative im pact on the environment and
human health, which could be caused as a result of improper liquidation of
waste. Please ask your local authorities or the nearest waste collection
centre for further details. The improper disposal of this type of waste may
fall subject to national requlations for fines.
For business entities in the European Union
If you wish to dispose of an electrical or electronic device, request the
necessary information from your seller ar supplier.
Disposal in other countries outside the European Union
**** If you wish to dispose of this product, request the necessary
information about the correct disposal method from local go- vernment
departments or from your seller.
This appliance complies with EU rules and regulations regarding
electromagnetic and electrical safety.
Changes to the text, design and technical specifi cations may occur without
prior notice and we reserve the right to make these changes.
Hereby, FAST CR, a.s. declares that the radio equipment type [VHP 3040] isin
compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.yenkee.eu
Copyright © 2023, Fast CR, a.s. Revision 03/2023
Notes:……………………………………..
Manufacturer:
FAST CR, a.s.,
U Sanitasu 1621,
25101, Ricany,
Czech Republic