Radio DM25LEU Dooya Battery Curtain Motor Instructions
- June 12, 2024
- Radio
Table of Contents
Radio DM25LEU Dooya Battery Curtain Motor
Product Information
Product Name: DM25LEU/S
Features:
- Built-in Receiver Jog & Tilt
- Built-in Lithium Battery
- Scan and Program Status Feedback
- Switch Direction Stall Protection
- Program Button Reset to Factory Mode
- Memorized Setting
- Electronic Limit Preferred Stop Position
- Speed Regulation
- Scene Control
Fields of Application: The motor is suitable for the motorization of roller blinds.
Specifications
- Working temperature: -10°C to +50°C
- Input Voltage: USB 5V 1A / USB 5V 2A
- Radio Frequency: 433.925MHz
- Maximum Running Time: 6 minutes
Product Usage Instructions
Safety Note:
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- If the supply cord is damaged, it must be replaced by a qualified professional.
Charging Instructions
This motor has a built-in Li-ion battery pack with integrated charge management. Follow the steps below for charging:
- Connect the micro-USB port to a 5V charger (most phone chargers have 5V output).
- Ensure the motor is turned off before charging.
- Charge the motor for 6 hours before first use.
- During operation, if the motor starts and the buzzer beeps 10 times, it indicates a low-voltage alarm and the motor needs to be charged.
- If the voltage is detected to be too low during operation, the battery will stop running and needs to be recharged.
- The LED indicator on the motor will blink red when the battery is low, blink green while charging, and stay solid green when fully charged.
Motor Installation
Follow the steps below for motor installation:
- Cut the drive tube to the required length.
- Ensure the edge of the tube is clean and burr-free.
- Mount the correct crown and drive adapter on the motor, ensuring the drive adapter fits firmly and the crown rotates freely.
- Align the notches on the crown and drive adapter with the drive tube, slide, and fit the motor into the drive tube.
- Mount the idler and bracket on both ends of the drive tube.
Note: Incorrect installation can lead to serious injury and will void the manufacturer’s liability and warranty. Please read the important safety instructions before installation.
SAFETY NOTE
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision orinstruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- WARNING: the drive shall be disconnected from its power source during cleaning, maintenance and when replacing parts.
- The instructions shall state that the A-weighted emis sion sound pressure level of the drive is equal to or less than 70 dB(A), e.g. by writing LpA ≤ 70 dB(A).
- The mass and the dimension of the driven part shall be compatible with the rated torque and rated operating time.
- The type of driven part the drive is intended for.
- WARNING: Important safety instructions. It is important for the safety of persons to follow these instructions. Save these instructions.
- Do not allow children to play with fixed controls. Keep remote controls away from children.
- Frequently examine the installation for imbalance and signs of wear or damage to cables and springs. Do not use if repair or adjustment is necessary.
- Watch the moving shutter and keep people away until the shutter is completely closed.
- WARNING: Important safety instructions. Follow all instructions, since incorrect installation can lead to severe injury.
- Before installing the drive, remove any unnecessary cords and disable any equipment not needed for powered operation.
Features
- Built-in Receiver
- Jog & Tilt
- Built-in Lithium Battery
- Scan and Program
- Status Feedback
- Switch Direction
- Stall Protection
- Program Button
- Reset to Factory Mode
- Memorized Setting
- Electronic Limit
- Preferred Stop Position
- Speed Regulation
- Scene Control
Fields of Application
The motor is suitable for the motorization of roller blinds.
Specifications
| Working temperature: -10℃ ~ +50℃ | Radio Frequency: 433.925MHz |
|---|---|
| Input Voltage: USB 5V 1A / USB 5V 2A | Maximum Running Time: 6 minutes |
Attention
Never drop, knock, drill or submerge the motor. Keep the power cable in
right position as following. Important safety instructions to be read before
installation. Incorrect installation can lead to serious injury and will void
manufacturer’s liability and warranty.
Charging Instructions
- This motor has a built in Li-ion battery pack with integrated charge management.
- Max power input for recharging: 5V 2A.
- Before first use please charge motor for 6 hours. Using 5V charger (most phones charger is 5V ) .
- During operation, when the motor starts, the buzzer will beep 10 times, indicating a low-voltage alarm and needs to be charged.
- During operation, the voltage was detected to be too low, the battery was about to run out, the battery stopped running and needed to be recharged.
Rechargeable Battery/Portable Charger For Emergency Usage
Motor Installation
Caution
- Do not expose motor to humid or extreme temperature conditions.
- Do not drill into motor.
- Do not cut the antenna and keep it clear from metal objects.
- Do not allow children to play with this device.
- If power cable or connector is damaged, do not use.
- Ensure correct crown and drive adaptor are used.
- Ensure power cable and aerial is clear and protected from moving parts.
- Cable routed through walls shall be properly isolated.
- Motor is to be mounted in horizontal position only.
- Before installation, remove unnecessary cords and disable equipment not needed for powered operation.
- Installation and programming to be performed by a qualified professional, use or modification outside the scope of this instruction may void warranty.
FCC
FCC Warning
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2 : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Do not dispose of in general waste. Please recycle batteries and damaged electrical products appropriately.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>