TRP RADIO TR0004 Car CD Receiver Instruction Manual

TRP RADIO TR0004 Car CD Receiver

How to read this manual

• The displays and faceplates shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or faceplates.
• Operations are explained mainly using buttons on the faceplate.
• English indications are used for the purpose of explanation. You can select the display language from the [FUNCTION] menu. (Page 6)
• [XX] indicates the selected items.
  • (Page XX) indicates references are available on the stated page.

WARNING : This symbol on the product means there are important operating and maintenance instructions in this manual. Be sure to carefully read instructions in this manual.

Before Use

IMPORTANT

• To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warnings and Cautions in this manual.

WARNING

• Do not operate any function that takes your attention away from safe driving.
• Do not ingest the battery, Chemical Burn Hazard The remote control supplied with this product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

CAUTION

Volume setting:

• Adjust the volume so that you can hear sounds outside the vehicle to prevent accidents.
• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

• Avoid using the external device if it might hinder safe driving.
• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.
• Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit.

Remote control (RC-406):

• Do not leave the remote control in hot places such as on the dashboard.
• Risk of fire or explosion if the battery is replaced by an incorrect type. Ensure to replace only with the same type.
• Risk of fire, explosion or the leakage of flammable liquid or gas if the battery is left in an extremely high temperature surrounding environment and/or subjected extremely low air pressure. The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
• Risk of fire, explosion or the leakage of flammable liquid or gas if the battery is disposed into fire or a hot oven, recharged, shorted, mechanically crushed or cut of the battery.
• If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician.

Basics

Faceplate

• Only for illustration purpose.

Remote control (RC-406)

How to replace the battery

Getting Started

Set the clock and date

1. Press the volume knob to enter [FUNCTION].

2. Turn the volume knob to select [CLOCK], then press the knob. To adjust the clock

3. Turn the volume knob to select [CLOCK ADJUST], then press the knob.

4. Turn the volume knob to make the settings, then press the knob. Set the time in the order of “Hour” “Minute”.

5. Turn the volume knob to select [CLOCK FORMAT], then press the knob.

6. Turn the volume knob to select [12H] or [24H], then press the knob.
   To set the date

7. Turn the volume knob to select [DATE FORMAT], then press the knob.

8. Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press the knob.

9. Turn the volume knob to select [DATE SET], then press the knob.

10. Turn the volume knob to make the settings, then press the knob. Set the date in the order of “Day” “Month” “Year” or “Month” “Day” “Year”.

11. Press and hold to exit. To return to the previous setting item, press.

Set the other optional settings
You can only set the following items while the unit is in STANDBY source.

1. Press B SRC repeatedly to enter STANDBY.
2. Press the volume knob to enter [FUNCTION].
3. Turn the volume knob to select an item (see the following table), then press the knob.
4. Repeat step 3 until the desired item is selected or activated.

5. Press and hold to exit. To return to the previous setting item, press .
   [AUDIO CONTROL]

   [SWITCH PREOUT] [REAR] /[SUB-W]: Selects whether rear speakers or a subwoofer are connected to the line out terminals on the rear (through an external amplifier). (Page 15)
   [SP SELECT]            OFF /[5/4]/[6*9/6]/[OEM]: Selects according to the speaker size

(5 inches or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance.

[TUNER SETTING]
[PRESET TYPE]          [NORMAL] : Memorizes one station for each preset button in each band (FM1/FM2/FM3/AM). ; [MIX]: Memorizes one station for each preset button, regardless of the selected band.
[SYSTEM]
[KEY BEEP]              [ON] : Activates the keypress tone. ; OFF: Deactivates.
[SOURCE SELECT] [BUILT-IN AUX] [ON] : Enables AUX in source selection. ;

[CD READ]              [1] : Automatically distinguishes between audio file disc and music CD. ; [2]: Forces to play as a music CD. No sound can be heard if an audio file disc is played.
[F/W UPDATE] [UPDATE SYSTEM]
| [F/W UP xxxx] (This feature is not available for this model.) [YES]: Starts upgrading the firmware. ; [NO] : Cancels (upgrading is not activated).

•   Once you have upgraded the firmware, you are unable to downgrade the firmware.

[ENGLISH]| Select the display language for [FUNCTION] menu and music information if applicable.

By default, [ENGLISH] is selected.

[ESPANOL]

Radio

“ST” indicator lights up when receiving an FM stereo broadcast with sufficient signal strength.

Search for a station

1. Press B SRC repeatedly to select TUNER.

2. Press J BAND repeatedly (or press #FM+/*AM– on the remote control) to select the band FM1/FM2/FM3/AM.

3. Press S / T (or press S / T (+) on the remote control) to search for a station.
   You can change the searching method for S / T buttons when pressed. Press K SEEK repeatedly to change the searching method.

   • AUTO1 : Automatically search for a station.

   • AUTO2 : Search for a preset station.

   • MANUAL : Manually search for a station.
     You can store up to 18 stations for FM and 6 stations for AM.

   • To store a station: Press and hold one of the number buttons (1 to 6).

   • To select a stored station: Press one of the number buttons (1 to 6) (or press one of the number buttons (1 to 6) on the remote control).

Direct Access Tuning (using the remote control)

1. Press DIRECT to enter Direct Access Tuning.
2. Press the number buttons to enter a station frequency.
3. Press ENT IW to search for a station.
   • To cancel, press or DIRECT.
   • If no operation is done for 10 seconds after step 2, Direct Access Tuning is automatically canceled.

Other settings

1. Press the volume knob to enter [FUNCTION].
2. Turn the volume knob to select an item (see the following table), then press the knob.
3. Repeat step 2 until the desired item is selected/activated.

4. Press and hold to exit. To return to the previous setting item, press .
   [TUNER SETTING]

   [AUTO MEMORY] [YES]: Automatically starts memorizing 6 stations with good reception. ;

[NO] : Cancels.

•    Selectable only if [NORMAL] is selected for [PRESET TYPE]. (Page 6)

[MONO SET]            [ON]: Improves the FM reception, but the stereo effect will be lost. ;

OFF : Cancels.

CD/USB/iPod

Insert a disc

The source changes to CD automatically and playback starts.

Connect a USB device

The source changes to USB automatically and playback starts. Do not leave the cable inside the vehicle when not in use.

Connect an iPod/iPhone

The source changes to iPod automatically and playback starts. Do not leave the cable inside the vehicle when not in use.

Basic operation

• For playable audio file, see “Playable files” on page 16.
• To directly select USB/iPod source, press iPod USB.
  To| On the faceplate| On the remote control
  ---|---|---
  Play back/pause| Press 6 IW.| Press ENT IW.
  Reverse/ Fast-forward| Press and hold S /

T.

| Press and hold S /

T (+).

Select a track/file| Press S / T.| Press S / T (+).
Select a folder*1| Press J / K.| Press #FM+/ AM–.

*Repeat play2 Press 4 repeatedly.**

[TRACK REPEAT]/[ALL REPEAT] : Audio CD [FILE REPEAT]/[FOLDER REPEAT]/[ALL REPEAT] : MP3/ WMA/WAV/FLAC file [FILE REPEAT]/[FOLDER REPEAT]/[REPEAT OFF]: iPod

*Random play2 Press 3 repeatedly.**

[DISC RANDOM]/[RANDOM OFF] : Audio CD [FOLDER RANDOM]/[RANDOM OFF] : MP3/WMA/WAV/ FLAC file, iPod Press and hold 3 to select [ALL RANDOM].*1

1. For CD: Only for MP3/WMA files. This does not work for iPod.
2. For iPod: Applicable only when [MODE OFF] is selected. (Page 9)

Select music drive
While in USB source, press iPod USB repeatedly. Stored songs in the following drive will be played back.

• Selected internal or external memory of a smartphone (Mass Storage Class).
• Selected drive of a multiple drive device. (This unit can support multiple drive device of up to 4 drives. However, this unit may take some time to read if three or more cards are connected.)

You can also select the music drive from the [FUNCTION] menu.

1. Press the volume knob to enter [FUNCTION].
2. Turn the volume knob to select [USB], then press the knob.
3. Turn the volume knob to select [MUSIC DRIVE], then press the knob.
4. Turn the volume knob to select [DRIVE CHANGE], then press the knob. The next drive ([DRIVE 1] to [DRIVE 5]) is selected automatically and playback starts.
5. Repeat step 1 to step 4 to select the following drives.
6. Press and hold to exit. To return to the previous setting item, press .

Direct Music Search (using the remote control)

1. Press DIRECT.
2. Press the number buttons to enter a track/file number.
3. Press ENT IW to search for music.
   • To cancel, press or DIRECT.
   • Not available if Random Play is selected.
   • Not applicable for iPod source.

Select control mode
While in iPod source, press iPod USB repeatedly.

[MODE ON]: Control iPod/iPhone using the iPod/iPhone itself. However, you can still perform play/pause, file skip, fast-forward or fast-reverse from this unit.
[ MODE OFF]: Control iPod/iPhone from this unit.

Select a file to play

From a folder or list
• For iPod, applicable only when [MODE OFF]/[BROWSE MODE] is selected.

1. Press.
2. Turn the volume knob to select a folder/list, then press the knob.
3. Turn the volume knob to select a file, then press the knob.

Selected file starts playing.

Quick search (applicable only for CD source and USB source) If you have many files, you can search through them quickly.

1. Press.
2. Turn the volume knob to select a folder/list, then press the knob.
3. Turn the volume knob quickly to browse through the list quickly.
4. Turn the volume knob to select a file, then press the knob. Selected file starts playing.

Skip search (applicable only for iPod source)
If you have many files in the selected list, you can perform the following to search for a file by skipping through the list at a rate selected in [SKIP SEARCH].

• For iPod, applicable only when [MODE OFF]/[BROWSE MODE] is selected.

1. Press.
2. Turn the volume knob to select a list, then press the knob.
3. Press S / T to search at a preset skip search ratio. Pressing and holding S / T searches at a 10% ratio irregardless of the [SKIP SEARCH] settings. (See the following.)
4. Turn the volume knob to select a file, then press the knob. Selected file starts playing.

[SKIP SEARCH] setting

1. Press the volume knob to enter [FUNCTION].
2. Turn the volume knob to select [USB], then press the knob.
3. Turn the volume knob to select [SKIP SEARCH], then press the knob.
4. Turn the volume knob to select the skip search ratio, then press the knob. [0.5%] (default)/[1%]/[5%]/[10%] The skip search ratio is shown as a percentage of the total files.
5. Press and hold to exit.
   Alphabet search (applicable only for iPod source) You can search for a file according to the first character. For iPod, applicable only when [MODE OFF]/[BROWSE MODE] is selected.

For iPod source

1. Press.

2. Turn the volume knob to select a list, then press the knob.

3. Turn the volume knob quickly to enter character search.

4. Turn the volume knob to select the character.
   • Select ” to search for a character other than A to Z, 0 to 9.

5. Press / to move to the entry position.
   • You can enter up to 3 characters.

6. Press the volume knob to start searching.

7. Turn the volume knob to select a file, then press the knob. Selected file starts playing.

AUX
You can listen to music from a portable audio player via the auxiliary input jack.

Preparation:
Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. (Page 6)

Start listening

1. Connect a portable audio player (commercially available).
2. Press B SRC repeatedly to select AUX.
3. Turn on the portable audio player and start playback.

Set the name of the external device

While listening to a portable audio player connected to the unit…

1. Press the volume knob to enter [FUNCTION].
2. Turn the volume knob to select [SYSTEM], then press the knob.
3. Turn the volume knob to select [AUX NAME SET], then press the knob.
4. Turn the volume knob to select an item, then press the knob. [AUX] (default)/[DVD]/[PORTABLE]/[GAME]/[VIDEO]/[TV]
5. Press and hold to exit. To return to the previous setting item, press .

Audio Settings

1. Press the volume knob to enter [FUNCTION].
2. Turn the volume knob to select an item (see the following table), then press the knob.
3. Repeat step 2 until the desired item is selected or activated.
4. Press and hold to exit.

(or using the remote control)

1. Press AUD to enter [AUDIO CONTROL].

2. Press J / K to select an item, then press ENT IW. To return to the previous setting item, press .
   [AUDIO CONTROL]

   [SUB-W LEVEL]| [–15] to [+15] ( [0] )| Adjusts the subwoofer output level.
   [BASS LEVEL]| [–8] to [+8] ( [+2] )| Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.)
   [MID LEVEL]| [–8] to [+8] ( [+1] )
   [TRE LEVEL]| [–8] to [+8] ( [+1] )
   [EQ PRO]| Adjusts your own sound settings for each source.

•    The settings are stored to [USER] in [PRESET EQ].

---|---
[BASS ADJUST]| [BASS CTR FRQ]     [60]/[80]/ [100] /[200]: Selects the center

frequency.

[BASS LEVEL]         [–8] to [+8] ( [+2] ): Adjusts the level. [BASS Q FACTOR] [1.00] /[1.25]/[1.50]/[2.00]: Adjusts the quality

factor.

[BASS EXTEND]         [ON]: Turns on the extended bass. ; OFF : Cancels.
[MID ADJUST]| [MID CTR FRQ]       [0.5KHZ]/ [1.0KHZ] /[1.5KHZ]/[2.5KHZ]: Selects

the center frequency.

[MID LEVEL]           [–8] to [+8] ( [+1] ): Adjusts the level. [MID Q FACTOR]    [0.75]/ [1.00] /[1.25]: Adjusts the quality factor.
[TRE ADJUST]| [TRE CTR FRQ]        [10.0KHZ]/ [12.5KHZ] /[15.0KHZ]/[17.5KHZ]:

Selects the center frequency.

[TRE LEVEL]           [–8] to [+8] ( [+1] ): Adjusts the level.
[PRESET EQ]| [DRIVE EQ]/[TOP40]/[POWERFUL]/[ROCK]/[POPS]/[EASY]/[JAZZ]/ [NATURAL]/ [USER] : Selects a preset equalizer suitable to the music genre.

•    Select [USER] to use the settings made in [EQ PRO].

•    [DRIVE EQ] is a preset equalizer that reduces noise outside the car or running noise of the tyres.

[BASS BOOST]| [LV1]/[LV2]/[LV3]: Selects your preferred bass boost level. ;

OFF : Cancels.

[LOUDNESS]| [LV1] /[LV2]: Selects your preferred low or high frequencies boost to produce a well-balanced sound at low volume. ; OFF: Cancels.

[LPF SUBWOOFER]| [THROUGH] : All signals are sent to the subwoofer. ; [85HZ]/[120HZ]/ [160HZ]: Audio signals with frequencies lower than 85 Hz/120 Hz/ 160 Hz are sent to the subwoofer.
---|---
[SUB-W PHASE]| [REVERSE] (180°)/ [NORMAL] (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance.

•    Selectable only if a setting other than [THROUGH] is selected for

[LPF SUBWOOFER].
[FADER]| [R15] to [F15] ([0]): Adjusts the front and rear speaker output balance.
[BALANCE]| [L15] to [R15] ( [0] ): Adjusts the left and right speaker output balance.
[VOLUME OFFSET]| For AUX: [–8] to [+8] ( [0] ) ; For other sources: [–8] to [0] : Presets the initial volume level of each source by comparing to the FM volume level. (Before adjustment, select the source you want to adjust.)
[SOUND RECNSTR]

(Sound reconstruction)

| [ON] : Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in audio data compression. ; OFF: Cancels.

• [SUB-W LEVEL]/[SUBWOOFER SET]/[LPF SUBWOOFER]/[SUB-W PHASE] is selectable only if [SWITCH PREOUT] is set to [SUB-W]. (Page 6)
• [SUB-W LEVEL]/[LPF SUBWOOFER]/[SUB-W PHASE] is selectable only if [SUBWOOFER SET] is set to [ON].

Display Settings

Zone identification for brightness settings

Set the dimmer
Press and hold DISP (DIMMER) to turn on or off the dimmer. Once you press and hold this button, [DIMMER] setting will be overwritten.

Change the display settings

1. Press the volume knob to enter [FUNCTION].
2. Turn the volume knob to select an item (page 14), then press the knob.
3. Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item.

4. Press and hold to exit. To return to the previous setting item, press .
   [DISPLAY]

   [DIMMER]             Dims the illumination. [ON]: Dimmer is turned on. OFF : Dimmer is turned off. [DIMMER TIME]: Set the time to turn on dimmer and to turn off dimmer.

1 Turn the volume knob to adjust the [ON] time, then press the knob.

2 Turn the volume knob to adjust the OFF time, then press the knob. Default: [ON]: [6:00PM] ; OFF: [6:00AM]

[BRIGHTNESS]        1 Select a zone. (See the illustration on the left column.)

2 [LVL00] to [LVL31] : Select your preferred brightness level for the selected zone.

[TEXT SCROLL]        [ONCE] : Scrolls the display information once. ;

[CLOCK]
[CLOCK DISPLAY] [ON]: The clock time is shown on the display even when the unit is turned off. ; OFF : Cancels.

Installation/Connection

Installing / Removing the unit
Insert the extraction keys deeply into the slots on each side, then follow the arrows as shown on the illustration.

Wiring connection

References

More information

• General
  This unit can only play the following CDs:

Playable files

• Playable audio file: For disc: MP3 (.mp3), WMA (.wma) For USB mass storage class device: MP3 (.mp3), WMA (.wma), WAV (.wav), FLAC (.flac)
• Playable disc media: CD-R/CD-RW/CD-ROM
• Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name
• Playable USB device file system: FAT12, FAT16, FAT32 Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or devices.

Unplayable discs

• Discs that are not round.
• Discs with coloring on the recording surface or discs that are dirty.
• Recordable/ReWritable discs that have not been finalized.
• 8 cm CD. Attempting to insert using an adapter may cause malfunction

About USB devices

• You cannot connect a USB device via a USB hub.
• Connecting a cable whose total length is longer than 5 m may result in abnormal playback.
• This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1.0 A.

About iPod/iPhone

• Made for
  • iPod touch (2nd, 3rd, 4th, 5th, and 6th generation)
  • iPod classic
  • iPod nano (3rd, 4th, 5th, 6th, and 7th generation)
  • iPhone 3G, 3GS, 4, 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE
• It is not possible to browse video files on the “Videos” menu in [MODE OFF].
• The song order displayed on the selection menu of this unit may differ from that of the iPod/ iPhone.
• You cannot operate iPod if or “ ” is displayed on iPod.
• Depending on the version of the operating system of the iPod/iPhone, some functions may not operate on this unit.

Change the display information
Each time you press DISP, the display information changes. If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information (eg. station name) appears or display will be blank.

Disc title/Artist Track title/Artist Playing time Clock back to the beginning

For MP3/WMA/WAV/FLAC files:

Song title/Artist Album title/Artist Folder name File name Playing time Clock back to the beginning

iPod| When [MODE OFF]/[BROWSE MODE] is selected. (Page 9)

Song title/Artist Album title/Artist Playing time Clock back to the beginning

AUX| Source name Clock back to the beginning

Troubleshooting

•   Check the cords and connections.

“MISWIRING CHECK WIRING        Turn the power off, then check to be sure the terminals of THEN PWR ON” appears.        the speaker wires are insulated properly. Turn the power

on again.

“PROTECTING SEND SERVICE”

appears.

| Send the unit to the nearest service center.
Source cannot be selected.| Check the [SOURCE SELECT] setting. (Page 6)
•    Sound cannot be heard.

•    The unit does not turn on.

•    Information shown on the display is incorrect.

| Clean the connectors.
The unit does not work at all.| Reset the unit. (Page 4)
Correct characters are not displayed.| •   This unit can only display uppercase letters, numbers, and a limited number of symbols.

•   Depending on the display language you have selected (page 6), some characters may not be displayed correctly.

Radio| •    Radio reception is poor.

•    Static noise while listening to the radio.

| Connect the antenna firmly.
CD/USB/iPod| Disc cannot be ejected.| Press and hold to forcibly eject the disc. Be careful not to drop the disc when it is ejected. If this does not solve the problem, reset the unit (page 4).
Noise is generated.| Skip to another track or change the disc.
“PLEASE EJECT” appears.| Reset the unit (page 4). If this does not solve the problem, consult your nearest service center.
Symptom| Remedy
---|---
CD/USB/iPod| Playback order is not as intended.| The playback order is determined by the order in which files were recorded (disc) or the file name (USB).
Elapsed playing time is not correct.| This depends on the recording process earlier (disc/USB).
“READING” keeps flashing.| •   Do not use too many hierarchical levels and folders.

•   Reload the disc or reattach the device (USB).

“NO DISC”| Insert a playable disc into the loading slot.
“TOC ERROR”| Make sure the disc is clean and inserted properly.
“NA FILE”| Make sure the media (disc/USB) contain supported audio files. (Page 16)
“COPY PRO”| A copy-protected file is played.
“NO DEVICE”| Connect a device (USB), and change the source to USB again.
“NO MUSIC”                     Connect a device (USB) that contains playable audio files.
“READ ERROR”| Copy the files and folders onto the USB device again. If this does not solve the problem, reset the USB device or use another USB device.
“NA DEVICE”| Connect a supported USB device, and check the connections.
“iPod ERROR”| •   Reconnect the iPod.

•   Reset the iPod.

Muting upon the reception of a phone call
Connect the MUTE wire to your telephone using a commercial telephone accessory. (Page 15)

• When a call comes in, “CALL” appears. (The audio system pauses.)
• To continue listening to the audio system during a call, press B SRC. “CALL” disappears and the audio system resumes.
• When the call ends, “CALL” disappears. (The audio system resumes.)

Specifications

(0.71 μV/75 Ω)

Quieting Sensitivity (DIN S/N = 46 dB)| 17.2 dBf

(2.0 μV/75 Ω)

Frequency Response (±3 dB)| 30 Hz — 15 kHz
Signal-to-Noise Ratio (MONO)| 64 dB
Stereo Separation (1 kHz)| 40 dB
AM| Frequency Range| 530 kHz — 1 700 kHz (10 kHz space)
Usable Sensitivity (S/N = 20 dB)| 29 dBμ

(28.2 μV)

Middle    1.0 kHz ±8 dB
Treble      12.5 kHz ±8 dB
Preout Level/Load| 2 500 mV/10 kΩ
Preout Impedance| ≤ 600 Ω
General| Operating Voltage| 12 V DC battery
---|---|---
Installation Size (W × H × D)| 182 mm × 53 mm × 158 mm (7-3/16” × 2-1/16” × 6-1/4”)
Net Weight (includes Trimplate, Mounting Sleeve)| 1.3 kg (2.9 lbs)

Subject to change without notice.

FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Declaration of Conformity

Pana-Pacific, Inc.
838 N. Laverne Avenue
Fresno, CA 93727
Phone:800-726-2636

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

SOFTWARE LICENSE AGREEMENT

The software embedded in the Product (hereinafter the “Licensed Software”) provided by Licensor is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software. The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement. This Agreement shall be deemed completed at the time the User (hereinafter the “User”) initially used the Product in which the “Licensed Software” is embedded. The Licensed Software may include the software which has been licensed to the Licensor directly or indirectly from any third party. In such case, some third parties require the Users to follow their conditions for use separately from this Software License Agreement. Such software shall not be subject to this Agreement, and the Users are urged to read the “Important Notice concerning the Software” to be provided separately below.

Article 1 General Provision
The Licensor shall grant to the User a non-exclusive and non-transferable (other than the exceptional case referred to in Article 3, Paragraph 1) licensed to use the Licensed Software within the country of the User. (the country where the User bought the Product (hereinafter the “Country”)

Article 2 License

1. The license granted under this Agreement shall be the right to use the Licensed Software in the Product.
2. The User shall not duplicate, copy, modify, add, translate or otherwise alter, or lease the Licensed Software and any related documents, whether in whole or in part.
3. The use of the Licensed Software shall be limited to personal purpose, and the Licensed Software shall not be distributed, licensed or sub-licensed whether it is for commercial purpose or not.
4. The User shall use the Licensed Software according to the directions described in the operation manual or help file, and is prohibited to use or duplicate any data in a manner violating the Copyright Law or any other laws and regulations by applying whole or a part of the Licensed Software.

Article 3 Conditions for Grant of License

1. When the User transfers the Product, it may also transfer the license to use the Licensed Software embedded in the Product (including any related materials, updates and upgrades) on condition that no original, copies or related materials continue in the possession of the User, and that the User shall cause the transferee to comply with this Software License Agreement.
2. The User shall not carry out reverse engineering, disassembling, decompiling or any other code analysis works in connection with the Licensed Software.

Article 4 Right pertaining to the Licensed Software

Any and all copyrights and other rights pertaining to the Licensed Software and related documents shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or sublicense for the Licensed Software (hereinafter the “Original Rightholder”), and the User shall not be entitled to any right other than the license granted hereunder, in respect of the Licensed Software and any related documents.

Article 5 Indemnification of Licensor

1. Neither the Licensor nor the Original Rightholder shall be liable for any damage incurred by the User or any third party due to the exercise of the license granted to the User under this Agreement, unless otherwise restricted by law.
2. The Licensor will offer no guarantee for the merchantability, convertibility and consistency with certain objective of the Licensed Software.

Article 6 Liability to Third Party

If any dispute has arisen with any third party due to an infringement upon a copyright, patent or any other intellectual property right that was caused by the User’s use of the Licensed Software, the User shall settle such dispute at its own cost and hold the Licensor and the Original Rightholder harmless from any inconvenience it may cause.

Article 7 Confidentiality
The User shall keep the confidentiality of such portion of the Licensed Software, related documents thereof or any other information to be granted under this Agreement, as well as the conditions of this Agreement as has not yet entered the public domain, and shall not disclose or divulge the same to any third party without approval of the Licensor.

Article 8 Termination
In case the User falls under any of the events described in the following items, the Licensor may immediately terminate this Agreement or claim that the User compensates for the damage incurred by the

Licensor due to such event:

1. when the User violated any provision of this Agreement; or
2. when a petition has been filed against the User for an attachment, provisional attachment, provisional disposition or any other compulsory execution.

Article 9 Destruction of the Licensed Software

If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed Software, any related documents and copies thereof within two (2) weeks from such date of termination.

Article 10 Protection of Copyright

1. The copyright and all the other intellectual property rights relating to the Licensed Software shall belong to the Licensor and the Original Rightholder, and in no event shall they be under the ownership of the User.
2. The User shall, whenever it uses the Licensed Software, comply with any laws relating to the copyright and other intellectual property rights.

Article 11 Export Restriction

1. It is prohibited to export the Licensed Software and any related documents outside the country of the User (including transmission thereof outside the country of the User via Internet of other communication tools).
2. The User shall understand that the Licensed Software shall be subject to the export restrictions adopted by the country of User and any other countries.
3. The User shall agree that the software will be subject to any and all applicable international and domestic laws (including the export control regulation of the country of User and any other countries, and any restrictions concerning the end-users, the use by end-users and importing countries to be provided by the country of User and any other countries, and any other governmental authorities).

Article 12 Miscellaneous

1. In the event any part of this Agreement is invalidated by operation of law, the residual provisions shall continue in force.
2. Matters not stipulated in this Agreement or any ambiguity or question raised in the construction of this Agreement shall be provided or settled upon good-faith consultation between the Licensor and the User.
3. The Licensor and the User hereby agree that this Agreement is governed by the laws of Japan, and any dispute arising from, and relating to the rights and obligations under, this Agreement shall be submitted to the exclusive jurisdiction of the Tokyo District Court for its first instance.

Important Notice concerning the Software

cJSON
Copyright (c) 2009 Dave Gamble
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

libFLAC
Copyright (C) 2000-2009 Josh Coalson
Copyright (C) 2011-2013 Xiph.Org Foundation
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

• Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
• Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
• Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

• Windows Media is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft.
• Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an Apple product may affect wireless performance.
• Apple, iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
• Android is a trademark of Google LLC.

References

• dtsc.ca.gov/hazardouswaste/perchlorate

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>