YENKEE YAC 450 Car Adapter User Manual

: June 12, 2024
: YENKEE

Table of Contents

YENKEE YAC 450 Car Adapter
Supply content
Device description
Putting into operation
USB sockets
Car sockets
Fuse
Technical specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

YENKEE YAC 450 Car Adapter

Supply content

Car adapter
Two-sided adhesive tapes
User’s manual

Device description

A	Input from 12V – 24V car socket
B	Outputs: 3x car socket; 4x USB-A to power portable devices
1	Mechanical on/off button
---	---
2	Display – showing the car on-board voltage
3	12V – 24V car socket
4	USB-A – 5V/2.4A
5	USB-A – 5V/1 A

Putting into operation

Before use, make sure that your car’s on-board voltage matches the product specifications. Connect the device “A” part to your car socket. Attach the device “B” part to a location in your car where it will not pose danger do driving and will not become loose and cause injury to people in case of an impact. Two-sided adhesive tapes to fix the device are included in package. Press the on/off button to turn on the USB sockets and car adapters at the rear of the “B” device. The display will show the on-board system voltage level.
After each trip, always turn the device off with the on/off button. This will prevent the battery from being drained when the engine is turned off.

USB sockets

The car adapter incorporated four USB type A sockets – two of them are located on the top and two on the side.
The “4” – 5V / 2,4A ports are suitable for charging devices with higher power demands such as tablets, power banks and smart phones.
The “5” – 5V / 1A ports are suitable for charging basic, low-power devices such as MP players, flashlights and watches.

Car sockets

With this adapter, you can add up to three sockets to your existing car socket. Before loading all car sockets simultaneously, make sure that the total current drawn by all appliances (including those connected in the USB sockets) does not exceed the technical specified value.

Fuse

The fuse is located inside the device. If the specified value at the device output is exceeded, the fuse will irreversibly cut off and the device will stop working. In such case, please contact an authorised service centre.

Technical specifications

Charging and power supply

4x USB-A output
3x 12V output
Specifications
2x USB-A – 5V/2.4A
2x USB-A – 5V/1A
DC 12V – 120W max. / DC 24V – 200W max.
Maximum USB output current 5V / 4A (simultaneously)
Display
Battery voltage indicator (9V – 30V)
Warning indication (flashing display)
Others
8A embedded one-time fuse
Short-circuit, overvoltage and overcurrent protection
Power cord length: 1m

INSTRUCTIONS AND INFORMATION ON DISPOSING OF USED PACKAGING MATERIALS
Dispose of used packaging material at a site designated for waste in your municipality.

DISPOSING OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol on products or original documents means that used electric or electronic products must not be added to ordinary municipal waste. For proper disposal and recycling, take these products to designated collection points. Or in some European Union states or other European countries the products can be returned to the local retailer when buying an equivalent new product. Disposing of this product correctly helps save valuable natural resources and prevents damage to the environment by improper waste disposal. Ask your local authorities or collection facility for more details. In accordance with national regulations penalties may be imposed for the incorrect disposal of this type of waste.

For business entities in European Union states
If you want to dispose of electric or electronic devices, ask your retailer or supplier for the necessary information.

Disposal in other countries outside the European Union
This symbol is valid in the European Union. If you wish to dispose of this product, request the necessary information about the correct disposal method from the local council or from your retailer.
This product meets all the basic requirements of the applicable EU directives.
The text, design and technical specifications may be changed without prior notice and we reserve the right to make these changes.
Manufacturer’s address: FAST ČR, a.s., U Sanitasu 1621, Říčany, Czech Republic. The original version is in the Czech language.