OLIFE Beamwalk T3 Light Integrated Trekking Poles User Manual

OLIFE Beamwalk T3 Light Integrated Trekking Poles

Thank you for purchasing this Olife product. Please read this manual carefully before use and keep it for future reference!

PACKAGE CONTENTS

SPECIFICATIONS

LIGHTING

• Above data are tested per ANSI/NEMA FL 1-2009 standard in Olight’s labs for reference.

TREKKING POLES

MATERIALS

• Shaft Construction: 7075 Aluminum Alloy
• Grip Material: EVA

SPECIFICATIONS

• Pole Type: Telescoping
• Grip Extension: Yes
• Adjustable: Yes
• Locking Mechanism: External Lever Lock
• Gender: Unisex

DIMENSIONS

• Usable Length: 39.4-53.1 in (100-135 cm)
• Collapsed Length: 25.6 in (65 cm)

WEIGHT

• Weight (Pair): 19.2 oz (544 g) with Lightweight Caps Only 21.5 oz (610 g) with Battery Packs Only

INSTRUCTIONS FOR USE

CHARGING

• Press the button below the battery pack, and then remove the battery pack. Plug in the USB-C charging cable to start charging.
• Charging Time: 4 hours

LIGHTWEIGHT CAPS

• Can be used in place of the battery packs if you want to save weight.

MOTION MODE
2 light colors; 4 light settings; 30-second standby function; memory function
ACTIVATING
With the light off, short press the top button to turn on the light and enter this mode.
TURNING OFF
Short press the top button to exit this mode and turn off the light.

SWITCHING BETWEEN SETTINGS

• With the light on, press and hold the top button to cycle through 4 light settings: Neutral White (Low) – Neutral White (High) – Red – Flashing Red. Release the button once it reaches the desired setting.
• The light will blink red (20 milliseconds on & 2 seconds off) after 30 seconds of no movement, and then it will return to the last light setting used once movement is detected again.
• Memory Function: Next time you enter this mode, it will default to the last light setting used.

CONSTANT MODE
Neutral white light only; stepless dimming; memory function

TURNING OFF
Short press the top button to exit this mode and turn off the light.
ADJUSTING THE BRIGHTNESS

• With the light on, press and hold the top button to steplessly adjust the brightness. Release the button once it reaches the desired brightness level. Each long press will reverse the brightness cycle from low to high or high to low.
• It will flash once to signal that the light has reached the highest or lowest brightness level.
• Memory Function: Next time you enter this mode, it will default to the last brightness level used.

SWITCHING BETWEEN MODES
Short press to turn off the light and exit the current mode; then activate either of the two modes as previously instructed.

TREKKING POLES

DEPLOYING

1. Open the lever and pull out the shaft section until it reaches your desired length.
2. “Snap” the lever closed firmly.

COLLAPSING

1. Open the lever and collapse the shaft section fully into the section above.
2. “Snap” the lever closed firmly.

ADJUSTING CLAMPING TENSION

1. Open the lever.
2. Turn the adjustment knob clockwise to increase clamping tension or counterclockwise to reduce it.

HOW TO HOLD A TREKKING POLE

1. Put your hand up through the bottom of the strap loop, and then pull the strap down and grab the grip of the pole.
2. Adjust the length of the strap loop so that when you bring your hand down in the strap it lines up comfortably with the grip.

ADJUSTING POLE LENGTH

• UPHILL SECTIONS
  Shorten the poles so you are not overreaching.

• DOWNHILL SECTIONS
  Lengthen the poles to avoid bending over too much.

• FLAT SECTIONS
  Your arm should form a 90-degree bend at the elbow.

• TRAVERSING A SLOPE
  Shorten the pole on the uphill side and lengthen the pole on the downhill side.

WARNING

• This product is NOT intended to be the primary light source if hiking at night.
• The trekking poles are to be used for activities such as hiking, trekking, and mountain trekking only. DO NOT use for any other purposes.
• Metal tips can damage concrete, granite, tiles, and other surfaces. Please pay attention to surface type and condition when using.
• DO NOT place lateral (sideways) force on the pole shafts.
• Make sure that each section of the poles is securely locked before and during use.
• The trekking poles can break if bent more than 15 degrees. Avoid excessively bending the poles.
• If the trekking pole gets stuck (in a crack, between rocks, etc.), gently pull the pole out vertically. DO NOT wobble it or pull it out sideways by force.
• If you choose carbon trekking poles, protect the carbon shaft from impacting sharp objects, as that will create a weak point in the shaft.
• DO NOT use the trekking poles like ropes to pull people.
• The trekking poles and their parts/accessories are NOT toys. Avoid any possible injuries caused by them, particularly to children.
• Minors should use the trekking poles only under adult supervision.
• Trekking poles are to be used as an auxiliary balance aid only. To avoid accidents, DO NOT allow trekking poles to bear your full weight.
• DO NOT extend the poles beyond the STOP mark on any section.
• DO NOT dismantle or modify the product in any way.

CARE AND MAINTENANCE

• After each use, pull the poles apart into separate segments, wipe each pole segment with a dry cloth, and then let them dry for 48 hours before reassembling and storing in a dry environment. If there is sand or other debris inside the tip and/or the shaft, pour it out before wiping the pole segments.
• DO NOT apply any chemicals, including lubricants or solvents.

LIMITED WARRANTY

TREKKING POLES
For one year following purchase unless otherwise indicated by law, we will warrant to the original retail buyer only that our products are free from defects in materials and workmanship as originally sold. If you receive a defective product, return it to us, and we will replace it subject to the following conditions: We do not warrant products which show normal wear and tear or that have been used or maintained improperly, modified or altered, or damaged in any manner.

BATTERY PACKS

• Obuy’s 2-year warranty

Global Customer Support

• [email protected]

Shenzhen Obuy Technology Co., Ltd

• 5th Floor, Building A2, Fuhai Information Harbor, FuYong Town,
• Bao’an District, Shenzhen, China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>