SPYPOINT LM2 Cellular Trail Camera User Guide

: June 12, 2024
: SPYPOINT

Table of Contents

IN THE BOX
BEFORE YOU GO TO THE FIELD
COMPONENTS
DISPOSAL
FREQUENCY
Documents / Resources

LM2 Cellular Trail Camera v1.1
Quick start guide

IN THE BOX

LM2 camera
Antenna
SIM card (preactivated and inserted in the camera)
Installation strap

BEFORE YOU GO TO THE FIELD

Getting ready, first time use

Format your memory card.
Long format your microSD card using a computer with an integrated microSD card slot or USB SD card reader.

SPYPOINT LM2 Cellular Trail Camera - Create an accoun Create an account on spypoint.com/activate

SPYPOINT LM2 Cellular Trail Camera - Download App Download the SPYPOINT app and sign in. SPYPOINT LM2 Cellular Trail
Camera - Cameras tab In the Cameras tab, press the + button.
Follow the instructions on the screen to add your camera.

SPYPOINT LM2 Cellular Trail Camera - antenna Screw in antenna & insert memory card, batteries.
Fill both sides of battery tray and insert following arrow orientation.

SPYPOINT LM2 Cellular Trail Camera - camera ON Turn your camera ON.

STATUS light will flash red, orange, green 2 times then while searching for signal (can take several minutes).
STATUS light will indicate signal strength.
= Good = Fair
= Weak or = No signal
If red, move camera to a new location and repeat step 6.
Upper delay light will flash for 30s.
When all the lights turn OFF the camera is ready to use.

Test your camera.
With the battery door open, move in front of the device. STATUS light will turn green then orange. Once the STATUS light turns OFF, check your app to ensure the photo has been received.![SPYPOINT LM2 Cellular Trail Camera

Turn your camera OFF](https://manuals.plus/wp-content/uploads/2023/07 /SPYPOINT-LM2-Cellular-Trail-Camera-Turn-your-camera-OFF.png) Turn your camera OFF until you’re ready to install it in field. Install your camera. Turn your camera ON & test it.
(Steps 6 & 7)

SPYPOINT LM2 Cellular Trail Camera - Qr Code http://spypoint.com/LM2-guide

Scan for detailed instructions, LED light pattern descriptions, complete user manual & other helpful information:
spypoint.com/LM2-guide
Need assistance? Just contact us!
spypoint.info/en/support-2/
+49 (0) 36331-403333

COMPONENTS

SPYPOINT LM2 Cellular Trail Camera - COMPONENTS 1

(1) Antenna
(2) Detection lens
(3) Photo lens
(4) Light sensor
(5) Delay light
(6) MicroSD card slot
(7) STATUS light| (8) SIM card slot
(9) Battery compartment
(10) OFF/ON switch
(11) LED
(12) Door
(13) Slots for installation strap| (14) Locking latch
(15) Cable lock hole
(16) Battery holder
(17) Antenna O-Ring
(18) 12 V jack
(19) Screw-thread for standard ¼”-20 tripod mount
---|---|---

DISPOSAL

Only use original spare parts and accessories.
Only use original spare parts and accessories. If, one day, your camera has been used so intensively that it has to be replaced or if you no longer have any use for it, you are obliged to dispose of it at a recycling center.
Information on return points for your electrical appliance can be obtained from your local waste disposal company or from your local administrative offices.
Electrical appliances not only contain valuable recyclable raw materials, but also substances which, if disposed of improperly, can affect public health and the environment.
Help ensure that valuable raw materials are recycled by returning your old appliance to a central collection point.
The WEEE (Waste Electrical and Electronic Equipment Directive) symbol represents the obligation.

FREQUENCY

Details available on the LM2 help web page (spypoint.com/LM2-guide)

FCC

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions :

This device must not cause harmful interference ;
This device must accept any interference received, including interference that may cause undesired operation.

WARRANTY

2-year limited warranty, visit spypoint.com/warranty for complete details.