Brilliant SMART 21956 WiFi CCT A60 LED E27 or B22 Globe Bulb User Manual
- June 4, 2024
- Brilliant SMART
Table of Contents
WiFi CCT A60 LED
E27 or B22 Globe
21956 21957
USER MANUAL
Box Content
Smart CCT A60 LED E27 or B22 x 1
User Manual x 1
Technical Specifications
Model No: 21956 21957
CCT LED: Warm White to Day Light
Working voltage: 220V – 240V AC 50Hz
Power: 9W 49mA
Dimmable: via BrilliantSmart app
Dimension: 112mm x Ø60mm
Base: E27 or B22
Weight: 42g
TA: 0…+35°C
Classification: Class II Construction
Security: Mac Encryption; WEP/WAPI/TKIP/AES
WiFi Standard: IEEE802.11b/g/n
System Req’s: iOS 8.0 or higher, Android 4.1 or higher
Installation Guide
IMPORTANT SAFETY ISSUES
Ensure the power is disconnected before installing.
This product is NOT suitable for damp or explosive environments.
Modification of this product will void any warranty.
Indoor use only.
INSTALLATION
POWER IS TO BE TURNED OFF AT THE EXISTING WALL SWITCH PRIOR TO INSTALLATION.
Insert the smart device into a suitable type light socket/lamp holder by
gently pushing then slight twist till the globe is locked in position
clockwise.
Be sure the smart globe is secured in the socket/lamp holder.
Turn on the smart device via the existing wall switch and follow the
BrilliantSmart app steps.
Connect to your WiFi
Ensure your mobile phone is connected to your 2.4GHz WiFi network.
Your mobile phone and your smart device need to be within good signal strength
range of your WiFi router. (Refer to your router specifications for max
range.)
Download the BrilliantSmart App
Please download the free BrilliantSmart app from the App Store or Google Play
store, or scan the QR code below.
http://www.brilliantsmart.com.au/downloadapp.html
Register the BrilliantSmart App
Open the BrilliantSmart app.
For new users, register a new account, or if the existing users, log in with
your user name and password.
Configure your BrilliantSmart App
Setting up your Home
You can set up multiple homes or locations. Click the ‘Add Home’ button. Or
Click on ‘Home’ top left if you are adding or modifying details then ‘Home
Management’ to setup your home(s), add or rename rooms, and share devices.
Add your Smart Device to your App
-
On initial power-on, the globe will begin blinking rapidly and be ready to pair. (2 times per second) if the smart globe does not start blinking turn OFF/On 3 times or until the light starts to blink rapidly)
-
Open the BrilliantSmart App, and tap ‘Add Device’ (if empty room) or ‘+’ to add your Smart Device.
-
The app will Automatically scan for devices and once found will prompt ‘Devices to be added: xx. Select ‘Go To Add’.
-
Select ‘+’ to add a device.
-
Verify your WiFi Network and Enter your WiFi Network Password.
The connection will now Begin. -
Once connected you will be prompted ‘Added successfully. Select the room device is located.
eg. ‘Lounge’. Select the pen icon to change the device name then select done. -
The Smart Device can now be controlled by the BrilliantSmart App.
| |
---|---|---
Go towww.brilliantsmart.com.au **for full instructions and features.**
Warning
- To prevent injury, this apparatus must be installed Safely and correctly.
- Do not open or tamper with smart devices. Injury may occur.
- For indoor use only. Not suitable outdoors.
- Do not allow children to play with the wall switch turning ON/OFF rapidly. This can cause the smart device to reset.
- Power Surge/Power Loss could possibly reset the smart device. If this happens follow setup instructions.
NB: BrilliantSmart app screens may differ due to application updates & improvements.
Disposal
Please dispose of this packaging material thoughtfully.
Please dispose of this product thoughtfully once it has passed its useful
life.
When your smart device comes to the end of its life or you choose to update or
upgrade it, please do not dispose of it with your normal household waste.
Please recycle where facilities exist.
When disposing of this fitting, check with your local authority for suitable
options.
Troubleshooting
Problem:
The smart device does not switch ON
| Possible Cause | Suggested Solution |
|---|---|
| No Mains Power | Check connections, fuse, and switches |
Problem:
Cannot link the smart device with the BrilliantSmart app
| Possible Cause | Suggested Solution |
|---|---|
| 1. Modem signal weak | Place devise and modem closer together |
| 2. Router/modem/smartphone firewall is enabled | Disable firewalls on all |
devices
3. Internet connection is down| Contact your provider
4. BrilliantSmart app not installed correctly| Remove app and re-install
For any other problems connecting your smart device to
BrilliantSmart app please visit:
www.brilliantsmart.com.au/faqs
Brilliant Lighting
956 Stud Road
Rowville Vic 3178 Australia
www.brilliantlighting.com.au
Australian Sales
T 03 9765 2555
T 1800 817 754 (interstate only)
F 03 9763 0277
E [email protected]
New Zealand Sales
T 09 974 9618
E [email protected]