Lisi LS-H003 Hair Brush Instruction Manual

Lisi LS-H003 Hair Brush

Product Information

Product Name: LS-H003

Product Type: Double-insulated Appliance

Maintenance: Almost maintenance-free, no lubricant required.Keep the product dust-free and dirt-free. Use a wet and clean cloth to wipe it. Disconnect the power supply before cleaning. Do not repair any malfunction by yourself.

Environment: Dispose of the product at a recycling center set by the government to protect the ecological environment and human health.

Components: Air outlet, Comb head unlocking, Power switch, Function key switch, Handle, Detachable power cord, Soft comb teeth, Changeable curling tongs.

Assembly Method: Insert the comb into the handle slot and rotate until it locks. To disassemble, press the unlock button, rotate the comb to the unlock symbol position, and pull it out in the arrow direction.

Power Cord Insertion: Press the spring ring parallel to the arrow direction to insert the power cord. Confirm the buckle is secure by gently pulling the power cord.

Knob Switch Description: Turn the right knob to adjust the speed and heat settings (LOW, MID, HIGH).

Storage and Cleaning: Disconnect the power supply after use. Store in a cool, dry place. Keep out of reach of children. Avoid pulling or wrapping the power cord. Wipe with a soft cloth (not dripping) for cleaning.

Fault Type and Solution: If the product is completely out of order, check if the power outlet is powered. If the power cord is damaged, it must be replaced by professionals from the manufacturer or maintenance department.

Product Usage Instructions

Assembly:

1. Insert the comb into the handle slot following the handle symbol.
2. Rotate the comb until it locks into place.

Disassembly:

1. Press the unlock button.
2. Rotate the comb to the unlock symbol position.
3. Pull out the comb in the arrow direction to complete disassembly.

Power Cord Insertion:

1. Press the spring ring parallel to the arrow direction.

2. Insert the power cord in the direction of the arrow.

3. Confirm that the buckle is secure by gently pulling the power cord.

Knob Switch Usage:

1. Connect the power supply. The OFF indicator will be on.
2. Turn the right knob to LOW for low-speed warm airflow.
3. Turn the right knob to MID for medium-speed warm airflow.
4. Turn the right knob to HIGH for high-speed heat airflow.

Storage and Cleaning:

1. Disconnect the power supply after use.
2. Store the product in a cool, dry place.
3. Keep out of reach of children.
4. Avoid pulling or wrapping the power cord.
5. Do not use liquid or spray cleaners.
6. Wipe the product with a soft cloth (not dripping).

Note: Do not touch eyes during usage. Refer to the user manual for troubleshooting and professional assistance.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
DANGER-To reduce the risk of electrocution:

1. Always unplug this appliance immediately after using.
2. Do not use while bathind
3. Warning: Do not use this appliance near a bathtub,shower, washbasin or other utensils with water.
4. Store the appliance properly to avoid falling into or pulling into the bathtub or water tank.
5. Do not place or store appliance where it can fall or be pulled into a tub or sink.
6. Do not place in or drop into water or other liquid
7. If the electrical appliance accidentally falls into the water, Do not reach for an appliance that has fallen into water. Unplug immediately.

WARNING-To reduce the risk of burns, electrocution, fire, or injury to persons:

1. An appliance should never be left unattended when plugged in.
2. Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
3. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or dropped into water Return the appliance to a service center for examination and repair.
5. Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
6. Never block the air openings of the appliance or place it on a soft surface.such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
7. Never use while sleeping.
8. Never drop or insert any object into any opening or hose.
9. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
10. Do not use an extension cord with this appliance.
11. Before connecting the electrical appliance, please make sure that the voltage marked on the appliance matches the local voltage of powersupply.
12. The plug needs to be completely inserted into the socket.
13. When the power cord plug is damaged and the socket is wet, do not use it to avoid, electric shock or short circuit.
14. Do not allow children to use it alone, and keep it out of reach of infants and young children to avoid dangerous accidents such as electric shock and burns.
15. This appliance may only be used for the intended purpose of this manual.Non-factory recommended accessories are strictly prohibited.
16. Keep the power cord away from heat and moisture.It is strictly forbidden to bend the power cord forcibly, wrap the appliance, carry heavy objects,etc.
17. Donotuseit nearhumidorammablematerials.
18. After use, or when you suspend use, please disconnect the power supply in time to cool the appliance.
19. Do not forcibly touch the heating plate.
20. Do not use a voltage converter when operating the appliance.
21. Keep the appliance or power cord away from heat source.
22. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

SERVICING OF DOUBLE-INSULATED APPLIANCES

In a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added to the appliance. Servicing a double-insulated appliance requires extreme care and knowledge of the system, and should be done only by qualifified service personnel. Replacement parts for a double-insulated appliance must be identical to the parts they replace. A double-insulated appliance is marked with the words ″DOUBLE INSULATION ″ or ″DOUBLE INSULATED.″ The symbol (square within a square) may also be marked on the appliance.

Maintenance

This product is almost maintenance free and does not need any lubricant. Just keep the product dust-free, dirt free and spray. If you need to clean, please disconnect the power supply and wipe it with a wet and cleancloth.If the power cord is twisted, please be patient to untwist it.
Warning: Do not repair by yourself if there is any malfunction.

Environment
In order to protect the ecological environment and human health, reduce waste discharge, when you dispose of the product, please do not put it together with the general household garbage, and hand it over to the recycling center set by the government, which is conducive to the environment. For Household Use Only

SAVE THESE INSTRUCTIONS

Components instruction

Assembly method

See Figure  ① for an example,Insert the comb into
the state in Figure ② according to the handle symbol corresponding to the positioning slot in the direction of the arrow.Rotate comb until lock snaps in to complete assembly
See Figure ③ for an example,Press the unlock button. See Figure ④ for an example，Rotate the comb to unlock symbol position. See Figure   ⑤ for an example，Pull out and comb hair in arrow direction to complete disassembly

As shown in Figure①, press the spring ring in parallel with the arrow in the direction of the arrow to the state of Figure ②, the power cord is pushed in the direction of the arrow, can be inserted (Figure③), loosen the spring ring, and gently pull the power cord to confirm that the buckle is good;

As shown in Figure④, press the spring ring in parallel with the two fingers in the direction of the arrow. The power cord is stretched outward in the direction of the arrow as shown in Figure⑤, and the removal has been completed (Figure ⑥).

Knob switch Description Steps:

1. After the power is connected, the OFF indicator is on
2. Turn the right knob to LOW light (high speed warm windshield)
3. Turn the right knob to MID light (low speed warm windshield)
4. Turn right knob to HIGH light (HIGH speed heat windscreen)

Storage and cleaning

1. Please disconnect the power supply after use.
2. Store in a cool, dry place.
3. Please keep out of reach of children.
4. Do not pull on the power cord or wrap the product with a power cord.
5. Do not use liquid and spray cleaners.
6. Please wipe the product with a soft cloth (not dripping).

Fault type and solution

in order to avoid danger, it must be replaced by professionals from the manufacturer, its maintenance department or similar departments.
 | Damages to internal circuit or parts of product| If the internal circuit or part is damaged, in order to avoid danger, it must be replaced by the manufacturer, its maintenance department or a professional from a similar department.

Components list of environmental protection

Service life of environmental protection

This sign means the service life of environmental protection. According to China’s “measures for the administration of the restriction on the use of harmful substances in electrical and electronic products” and China’s electronic industry standard SJ / t11364 “requirements for the restriction on the use of harmful substances in electrical and electronic products”, the sign shall be printed on the electronic and electrical products sold in China. This marking period (10 years) refers to the period during which the harmful substances or hazardous substances of the product will not leak under normal use, rather than the period for ensuring the service performance of the product. The electronic and electrical products contain some harmful substances which can be safely used within the environmental protection service life. When the electronic and electrical products are used or discarded, please comply with the laws and regulations of electrical and electronic products, recycling and other relevant local laws and regulations.

Identification of the name and content of hazardous substances or elements

Name and content of harmful substances in the product

Part Name

| Hazardous Substance
Lead

（Pb）

| HG

（Hg）

| Cadm

-ium

（Cd）

| Hexavalent chromium

（Crw）

| Polybrominated biphenyl

（PBB）

| Polybrominated diphenyl ether

（PBDE）

Outer casing, machine body| ○| ○| ○| ○| ○| ○
Internal wire and power cord| ○| ○| ○| ○| ○| ○
Foam material| ○| ○| ○| ○| ○| ○
Screw and nut| ○| ○| ○| ○| ○| ○
PCB and electronic components| ×| ○| ○| ○| ○| ○
Motor assemblies| ×| ○| ○| ○| ○| ○

Heating element structure

| ×| ○| ○| ○| ○| ○
This form is prepared in accordance with the provisions of SJ/T 11364-2014

〇: Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirement specified in GB/T 26572.

×: Indicates that the content of the hazardous substance in a certain homogeneous material of the part exceeds the limit requirement specified by GB/T 26572. The parts marked with “X” are unable to replace the harmful substance due to the limitation of the global technological development level.

The “Hazardous Substances” shown on this form will not cause any harm to the human body and the environment under normal use of the product.

• The “Hazardous Substances” and the components present in the form provide consumers and recycling practitioners with information on the presence of the relevant substances, which helps the product to be disposed of properly.

  • Product name: Hair Brush
  • Model: LS-H003
  • Executive standard： UL859/EN60335-1/EN60335-2-23 CSA E60335-1/CSA E60335-2-23
  • Rated voltage： 100V-240V/AC
  • Rated power： 50-60Hz
  • Rated input power： Max.55W(Steady)
  • Date of manufacturing: Mark on the package or product body
  • Place of origin： Guangdong, China

Product Certificate

• Product name： Hair Brush
• Model： LS-H003
• Inspection： OK

After-sales Service

Thank you for using Lisiproof™ products, we will be committed to better products, more attentive service, and more favorable prices to serve consumers.The company has more products for you to choose!
Welcome to www.lisiproof.com.
It will be used normally from the date of purchase. The whole machine enjoys one year of free maintenance service. Other plastic and silicone parts of the product are consumables. If it is damaged, it needs to be purchased from our distribution points; Other consumable parts are not covered by the warranty;
Please show the after-sales service card and purchase voucher or invoice when repairing.

Non-warranty range

• Operator improper use or use for damage caused by other uses;
• Demolition, modification or replacement of parts by yourself;
• Failure to follow the instructions for use makes the product unusable;
• This product cannot be used due to natural disasters, ground changes or other natural disasters;
• No proof of purchase is provided.
• The purchase proves that the damaged pollution cannot be discerned.

References

• private label ceramic hair straightener titanium flat irons

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>