Bestway 65346 Inflatable Surfboard Instruction Manual

Bestway 65346 Inflatable Surfboard

Product Information

• Item: 65346
• Inflated Size: 3.05m x 84cm x 15cm (10′ x 33 x 6)
• Recommended Maximum Load Capacity: 130kg (287lbs)
• Working Pressure: 1.03 bar (15psi)
• Maximum Number of Persons: 1 Adult

Product Usage Instructions

1. Adjust the length of the oar before using the SUP (refer to Fig 1).
2. Kneel on the board (refer to Fig 2).
3. Gradually stand up on one leg (refer to Fig 3).
4. Stand up with the other leg and keep your hands on the board (refer to Fig 4)
5. Maintain balance with the paddle (refer to Fig 5).
6. Keep knees slightly bent, increase the balance buffer, and start rowing (refer to Fig 6).
7. Begin to row after standing up (refer to Fig 7).

Maintenance and Storage Instructions

1. Disassemble the fin (refer to Fig 1).
2. Deflate the SUP by pushing on the pin and rotating clockwise (refer to Fig 2).
3. Fold the SUP, but not more than 10 cm every time (refer to Fig3).
4. Pack the SUP (refer to Fig 4).
5. Insert the SUP in the bag (refer to Fig 5).

Repair Instructions

1. Deflate the board (refer to Fig 1).
2. Clean the surface around the leak (refer to Fig 2).
3. Cut the repair patch to the suitable size (refer to Fig 3).
4. Apply the glue and patch on the damaged surface (refer to Fig 4).
5. Press the repair patch for 30 seconds (refer to Fig 5).
6. Wait 24 hours before use (refer to Fig 6).

INSTRUCTION

WHAT INBOX

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS.

• Carefully read, understand, and follow all information in this user manual before inflating and using the SUP.
• These warnings, instructions, and safety guidelines address some common risks during the use of the SUP, but they cannot cover all risks and dangers in all cases. For your own safety, always heed the advice and warnings in these instructions. Non-compliance with these operating instructions may expose you to serious danger or death. Only use the product in the places and conditions for which it is intended.
• Safekeeping the instruction. If an instruction is missing, search it in the website www.bestwaycorp.com/support.
• Stand-up Paddling is a dangerous sport. Use of this product exposes the user to unexpected risks, dangers and hazards.
• User should realize and understand these risks. The use of this product implies respect of the safety instructions described in the manual.
• Regardless of the number of persons on board, the total weight of persons and equipment must never exceed the maximum recommended load.
• Do not use this product if you are under the influence of alcohol, drugs or medications.
• Life saving devices such as life jackets and buoys should be pre-inspected and used at all times. Always paddle with an experienced partner when using this product.
• Tell your sail routes and time schedule to your partner.
• Check the weather forecast first to know the marine environment and weather conditions before starting. Bad weather and marine environment is very dangerous. Never use this product in conditions that are beyond your ability (such as, but not limited to, high surf, riptides, currents or river rapids)
• Use the product near the shore and beware of natural factors such as wind, tidewaters and tidal waves. BE AWARE OF OFFSHORE WINDS AND CURRENTS.
• Before every use, carefully inspect the product for signs of wear or leakage to ensure everything is in good condition. Please do not use the SUP if you find any damage. Do not surf in unfamiliar water areas.
• Beware of potential harmful effects of liquids such as battery acid, oil and petrol. These liquids may damage the product. Inflate according to the rated pressure on the product or it will cause over inflation and/or an explosion.
• Stay balanced. Uneven distribution of loads on the board may cause the board to overturn which could lead to drowning.
• Know how to operate this product. Check your local area for information and/or training as needed.
• Inform yourself about local regulations and dangers related to surfing, boating and/or other water activities.
• The air pressure gauge of the hand pump only shows the air pressure higher than 5 psi, which is normal. When the air pressure in the product is lower than 5 psi, the air pressure gauge will not show a value.
• Extended exposure to sun can shorten the lifespan of your SUP. We suggest not leaving SUPs in direct sunlight for more than 1 hour after use.
• Store in a cool, dry place and out of children’s reach.
• Do not unfold this product when the temperature is low. The product should be placed at room temperature (over 20˚C) for 24 hours before inflation. Deflate completely before folding the SUP.
• Take the SUP out from the bag and refer to the packaging steps for long-term storage.

TECHNICAL SPECIFICATIONS

Item

|

Inflated Size

| Recommended Working Pressure| Maximum Load Capacity| Maximum Number of Persons
---|---|---|---|---
65346| 3.05m x 84cm x 15cm (10′ x 33″ x 6″)| 1.03bar (15psi)| 130kg (287lbs)| 1 Adult

INSTALLATION OF THE SUP

For the installation instructions, read the drawings inside the manual. Drawings are for illustration purpose only. May not reflect actual product. Not to scale.

1. Open the inflation valve, push on the pin and rotate anticlockwise. (Fig 1).
2. Connect the inflation hose to the inflation valve (Fig 2).
3. Inflate the SUP to 1.03 bar (15 psi) (Fig 3).
4. Close the valve before use (Fig 4).
5. Install the safety rope (Fig 5 & 6).
6. Install the fin (Fig 7).
7. Assemble the oar (Fig 8).
8. Completion (Fig 9).

USAGE OF THE SUP

For the usage instructions, read the drawings inside the manual. Drawings are for illustration purpose only. May not reflect actual product. Not to scale.

1. Adjust the length of oar before using the SUP (Fig 1).
2. Kneel on the board (Fig 2).
3. Gradually stand up on one leg (Fig 3).
4. Stand up with the other leg and keep your hands on the board (Fig 4).
5. Maintain balance with paddle (Fig 5).
6. Keep knees slightly bent, increase the balance buffer and start rowing (Fig 6).
7. Begin to row after standing up (Fig 7).

MAINTENANCE AND STORAGE OF THE SUP

For the maintenance and storage instructions, read the drawings inside the manual. Drawings are for illustration purpose only. May not reflect actual product. Not to scale.

1. Disassemble the fin (Fig 1).
2. Deflate the SUP by pushing on the pin and rotating clockwise. (Fig 2).
3. Fold the SUP, but not more than 10 cm every time (Fig 3).
4. Pack the SUP (Fig 4).
5. Insert the SUP in the bag (Fig 5).

REPAIR

For the repair instructions, read the drawings inside the manual. Drawings are for illustration purposes only. May not reflect the actual product. Not to scale.

1. Deflate the board (Fig 1).
2. Clean the surface around the leak (Fig 2).
3. Cut the repair patch to a suitable size (Fig 3).
4. Apply the glue and patch on the damaged surface (Fig 4).
5. Press the repair patch for 30 sec (Fig 5).
6. Wait 24 hours before use (Fig 6).

CONTACT

• Bestway Central & South America Ltda, Salar Ascotan 1282, Parque Enea, Pudahuel, Santiago, Chile
• Distributed in Australia & New Zealand by Bestway Australia Pty Ltd, Unit 2/98-104 Carnarvon St Silverwater, NSW 2128, Australia
• Tel Australia: (+61) 2 9037 1388;
• New Zealand: 0800 142 101
• Distributed in the United Kingdom by Bestway Corp UK Ltd. 8 Wentworth Road, Heathfield Industrial Estate, Newton Abbot, Devon, TQ12 6TL
• Bestway (Hong Kong) International Ltd./Bestway Enterprise Company Limited
• Suite 713, 7/Floor, East Wing, Tsim Sha Tsui Centre, 66 Mody Road, Kowloon, Hong Kong
• www.bestwaycorp.com.
• For support please visit us at:bestwaycorp.com/support.

References

• Sunhost
• Bestway - Your Fun is Our Business
• Customer Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>