4K5 BETTER EQUIPMENT HD 6000 LED Work Light Instruction Manual
- June 9, 2024
- 4K5 BETTER EQUIPMENT
Table of Contents
HD 6000 LED Work Light
Instruction Manual
HD 6000 LED Work Light
Completely read through the operating instructions as well as the latest information under the internet link at the end of these instructions. Follow the instructions they contain. This document must be kept in a safe place and passed on together with the device.
General safety instructions
– The device must only be used in accordance with its intended purpose and
within the scope of the specifications.
– Modifications or changes to the device are not permitted, this will
otherwise invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– Do not point the beam of light directly into the eyes of people,
particularly those wearing glasses or contact lenses (high dazzling effect) or
animals.
– Under no circumstances should you look directly into the light produced by
this device or when it is reflected off specular surfaces.
– Close your eyes and move your head away from the beam of light if optical
radiation hits your eyes.
– Avoid heat build-up during use, for example, due to the covering the device.
– Do not place the lamp in front of inflammable material when in use. It could
ignite.
– Do not use the lamp in traffic.
– Do not leave the lamp unsupervised with children.
– Before using the lamp for the first time, the battery must be fully charged.
– Recharge frequently.
– Always replace the battery with an original 4K5 battery.
– Do not leave the battery without charge for an extended period. Deep
discharge risks damaging the battery.
– Always respect applicable legislation for working with electrical equipment
in order to reduce the risk of accidents.
– Protect the mains cable from oil, heat and sharp edges.
– Charging Indoor Only.
– When charging while the lamp is on, the charger will only be able to charge
the battery to approx. 30%. Switch off the lamp to fully charge the battery.
– The light source of this lamp is not replaceable; when the light source
reaches its end of life the whole lamp shall be replaced.
Safety instructions
Using artificial, optical emission (OStrV)
Risk Group 1
CAUTION: Possibility of harmful optical radiation. Hazard for retina from
blue light between 400 and 780 nm. Do not look into the lamp for longer
periods during operation. Can be harmful to eyesight.
Power bank
– Built-in power bank with USB outlet to charge mobile devices Output: 5V, 1A,
Capacity: 6000mAh
– The power bank will automatically shut down when battery voltage is below
9.5 V. Lamp function will continue until battery is fully discharged.
Integrated WIRELESS light control
Compliant with iPhone 4S or higher / Android 4.3 or higher
– Turn lamp off or adjust lamp output
– Control/connect up to 4 lamps together
4K5 Light Control App
Technical Data
(Subject to technical changes without notice. 21W31)
| Luminosity | 1200 lm – 6000 lm |
|---|---|
| Duration | 1 hours – 6 hours |
| LED chip | COB LED |
| Protection class (lamp) | IP 67 |
| Power supply | Li-Ion 10.8 V / 6 Ah |
| 4-Mar | 3 – 4 hours |
| Operating conditions | 0° … 40° C |
| Storage conditions | -10° … 60° C |
| Dimensions | 194 x 213 x 70 mm |
| Overall weight | 2590 g (including battery pack) |
EU directives and disposal
This device complies with all necessary standards for the free movement of
goods within the EU.
This product is an electric device and must be collected separately for
disposal according to the European Directive on waste electrical and
electronic equipment.
Further safety and supplementary notices at:
www.4k5tools.com For lithium-based primary and
secondary batteries as well as other high performance batteries Only dispose
of completely discharged batteries. If a battery is not completely discharged,
precautions must be taken to prevent short circuiting its terminals, e.g.
isolation of the terminals.
Notice about transporting products containing lithium batteries The battery
has been built and tested according to the current UN manual 38.3. Effective
protection against over-pressure, short-circuit, forceful breakage and reverse
current are provided. Refer to the operating instructions for battery data. If
no specific safety information is provided this means the quantity of lithium
and energy level are below the currently applicable limits. In this case the
battery, neither on its own nor installed in the device, is subject to
international hazardous materials regulations. The transport of multiple
batteries could be relevant for hazardous materials regulations, please
observe the special conditions (e.g. packaging).
https://eprel.ec.europa.eu/qr/775554
This luminaire contains a light source of energy efficiency class E
SERVICE
Umarex GmbH & Co. KG
– Laserliner –
Möhnestraße 149, 59755 Arnsberg, Germany
Tel.: +49 2932 638-300,
Fax: +49 2932 638-333
info@laserliner.com
Umarex GmbH & Co. KG
Donnerfeld 2
59757 Arnsberg, Germany
Tel.: +49 2932 638-300
Fax: +49 2932 638-333
www.4k5tools.com