PARTNER C10-1R POS Terminal User Guide

PARTNER C10-1R POS Terminal

Identifying Components

FCC Statement

Federal Communications Commission (FCC) Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING

• The system uses a 3V CR2032 battery mounted on the mainboard to keep time. There is a risk of explosion if the wrong battery type is used when replacing. Dispose of used batteries according to local ordinance regulations.

WARNING

• This is Class A Product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.

Safety information

Before installing and using the machine, take note of the following precautions:

• Do not place the unit on an unstable surface, cart, or stand.
• Do not block the slots and opening on the unit, which is provided for ventilation.
• Only use the power source indicated on the marking label. If you are not sure, contact your dealer or the Power Company.
• When replacing parts, ensure that your service technician uses the parts specified by the manufacturer.
• Do not place anything on the power cord. Place the power cord where it will not be in the way of foot traffic.

FCC Radiation Exposure Statement

• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
• This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Specification

4 x Serial ports, RS232 (RJ45), 0V/5V/12V selected in UI (COM1, COM2, COM3, COM4)

1 x LAN, (IEEE 802.3 10/100/1000 Mbps Ethernet, RJ45)

1 x RJ11 port supports 2 cash drawers with 24V / 12V by jumper setting 1 x Audio (1 x line out)

1 x HDMI 2.1

1 x DC +24V input 1 x Micro SD card

Speaker| 1 x Speaker 3W
Printer| 3″ Thermal printer
Optional Peripheral| MSR (Beep), IC Card Reader, Fingerprint, RFID 2D Bar Code Scanner

5M Camera

CD-101C

Display Support| 2 Independent Displays (Main Display + CD-101C or HDMI)
Spill & Dust resistant| N/A
Operation System| Android 12
SW| N/A
Power Adaptor| AC-In 100~240V / DC-Out 24V,72W
Reliability| System Operating Temperature:0~40°C System Humidity: 15% ~ 80%

Storage Temperature: -20~60°C

Dimensions| 340.64 (W) x 315.19 (H) x 247.13 (D) mm
Weight| 4.0 Kgs

CE RF Feature

Contact Information

Partner Tech Corporation

• 10F., 233-1, Baoqiao Road, Xindian, New Taipei City 231, Taiwan
• Phone: +886-2-29188500
• http://www.partner.com.tw/.

References

• Partner Tech US | POS Terminals, Self-Checkout Solutions, Kiosks, Mobile POS, Mobile Computers, POS Peripherals

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>