TCL AIR01 Smart Glasses User Guide

June 12, 2024
TCL

TCL AIR01 Smart Glasses

Product Information

  • Product Name: XYZ Air Purifier
  • Model Number: AP-1234
  • Manufacturer: ABC Technologies
  • Power Supply: 110-240V AC, 50/60Hz
  • Dimensions: 12.5 x 8.6 x 18.2 inches
  • Weight: 5.2 lbs

Product Usage Instructions

  1. Place the XYZ Air Purifier on a flat and stable surface.
  2. Plug the power cord into a suitable power outlet.
  3. Press the power button to turn on the air purifier.
  4. Use the control panel to set the desired fan speed and operating mode.
  5. For optimal performance, it is recommended to keep doors and windows closed while using the air purifier.
  6. The XYZ Air Purifier features a filter replacement indicator.
  7. When the indicator lights up, it is time to replace the filter.
  8. To replace the filter, turn off the air purifier and unplug it from the power outlet. Open the front cover and carefully remove the used filter. Insert the new filter, ensuring it is securely in place. Close the front cover.
  9. Clean the exterior of the air purifier regularly with a soft, damp cloth. Do not use harsh chemicals or abrasive materials.
  10. When not in use, unplug the air purifier and store it in a cool, dry place.
  11. Please refer to the user manual for detailed maintenance instructions and troubleshooting tips.

OVERVIEW

  • Bluetooth Name: Air01
  • Standby time: =120h
  • Music playback time: =4.5h
  • leg material: TR90
  • Charging time: =1.5h
  • Battery capacity: 80mAh X2
  • Lens material: nylon
  • Talktime:-3.5h

PACKING LIST

POWER SWITCH

POWER ON

  • Press and hold the touch points of the left and right legs for 3 seconds respectively, Or then pull it out after charging to start automatically. (the red light is always on for 1 second)

SHUT DOwN:
Note: when the legs are paired and working, touch any side of the legs and all turn off After 4 seconds. When only one side leg is working, long press the touch point of the Working leg and turn it off after 4 seconds. (the red light flashes 3 times) Automatically shut down when charging, Bluetooth is automatically turned off if it is not connected for 5 minutes

PAIRING

MATCH
Automatically search for Bluetooth for 2 minutes after power-on. If it is not connected to Bluetooth after a timeout, the search will be stopped. After the Pairing is successful. the legs lights will be off.

DISCONNECT AND RECONNECT
After the phone’s Bluetooth restarts, the device automatically connects When the glasses approach.

PLAYBACK CONTROL

PLAY OR PAUSE
When playing music, continuously touch the left/right leg touch Points twice to pause/play music.

NEXT TRACK
When playing music, continuously touch the right leg touch point three times.

LAST TRACK
When playing music, continuously touch the left leg touch point three times.

VOICE ASSISTANT CONTROLS

VOICE VERB ASSISTANT
Press and hold the right leg button for 2 seconds to activate the voice assistant.

VOICE ASSISTANT
After activation, press and hold the right leg key for 2 seconds to close the voice assistant.

GAME MODE/MUSIC MODE CHANGE
Press and hold the left leg touch point for 2 seconds.

CHARGING

CHARGE DISPLAY
When charging, the red light is always on. When fully charged, the red Light will flash slowly 10 times and then go out. The smart glasses Will automatically turn off when charging, and automatically turn on When the charger is pulled out.

LOW POWER REMINDER
If the battery is low, the voice prompt “low battery” will be broadcast Every minute. (the red light blinks once every 7 seconds)

MEET I BATTERY DISPLAY TAMER M RENNEN.
The phone displays the current power of the connecting main leg.

CAUTION

  • Before using and operating the equipment, please read and observe the following precautions to ensure the best performance of the equipment and avoid dangerous or illegal situations.
  • To prevent possible hearing loss, do not use high volume for a long time.
  • Please avoid the equipment and its accessories from rain or dampness, so as not to cause the function failure after water ingress, or cause fire or electric shock hazard
  • Do not disassemble or modify the equipment (including replacing the built-in battery) and accessories without authorization, otherwise, the equipment and accessories will not be covered by the company’s warranty.
  • Before cleaning and maintenance, please stop using this device, close all applications, and disconnect all connections or cables with other devices.
  • If not used for a long time, please fully charge every 3 months.
  • Do not wear this product and place it in water (in the rain, diving).
  • The quality warranty period is one year from the date of sale by our company; If the product is damaged due to improper use during use, no warranty is provided.

FCC Compliance Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2.  this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. So the stand-alone SAR evaluation is not necessary.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals