WOWOW 2311200C-AMUS Contemporary Wall Mount Pot Filler Faucet Instruction Manual

WOWOW 2311200C-AMUS Contemporary Wall Mount Pot Filler Faucet

Product Information: Wall Mounted Pot Filler Faucets

The Wall Mounted Pot Filler Faucets are designed to deliver cold water from a main supply. They can be positioned above sinks or stoves, and the articulated spout allows for convenient positioning above pots or pans as needed. The faucet has a durable finish that should be cleaned gently with a damp cloth and dried with a soft towel to avoid damage from harsh abrasives or polish.

Product Features:

• Simple on/off control by rotating the handle 90 degrees (1/4 turn)
• Shut off both handle cartridges when not in use or left unattended
• Cold water connection only
• Recommended hole size for installation: 1/2 IPS inlets
• Compliant with California water efficiency regulations
• Complies with California Proposition 65 and the Federal Safe
  Drinking Water Act

Installation Note:
When installing the faucet on plasterboard walls (not solid walls), ensure that appropriate reinforcement is in place to ensure sufficient strength.

Product Usage Instructions

1. Wrap plumber tape around the pipe threads.
2. Connect the faucet to the 1/2 IPS supply line.
3. Push the flange on the pot filler and mark the locating hole on the wall.
4. Drill holes and insert plugs.
5. Wrap plumber tape around the pipe threads. Install the gasket and flange using the provided screws.
6. Remove the aerator and turn the faucet handles to the full on position.
7. Turn on the cold water supplies and flush the water lines for one minute to remove any debris.
8. Check all connections for leaks and retighten if necessary.
9. Place the flange trim onto the faucet and thread the faucet onto the pipe. Tighten securely, but do not overtighten.
10. Screw on the pot filler and use a 1.5mm allen wrench to fasten it to the flange.
11. If the faucet leaks out of the spout or handle, replace the valve cartridge. Remove the handle, ring, and screw. Unscrew and replace the valve cartridge using a 1.5mm hex. Assemble in reverse order, ensuring that the handles are lined up with the valves in the closed position before pushing them into place.

Note: In areas with extremely low water pressure causing unsatisfactory water flow, replacing the aerator may improve the flow in the faucet.

WALL MOUNTED POT FILLER FAUCETS

You may need

For easy installation of your faucet you will need:

• To READ ALL the instructions completely before beginning.
• To READ ALL warnings, care, and maintenance information.

Application

Faucet are designed for delivering cold water from a main supply. Faucet can be positioned above sinks or stoves and the articulated nature of the spout enables the outlet to be conveniently positioned above pots / pans as required.

Installation

Note:
When installing on plasterboard walls (not solid walls) it must be assured that an appropriate reinforcement is in place to ensure sufficient strength.
Flush pipes thoroughly!

Cleaning and Care

• Care should be given to the cleaning of this product. Although its finish is extremely durable,
• It can be damaged by harsh abrasives or polish.
• To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.

Notice:
Simple on/off control by rotating handle 90 (1/4 turn) Shut off both handle cartridges when not in use or left unattended. Improper use or inadequate drainage below faucet may cause water damage.

INSTRUCTIONS

1. Wrap plumber tape around pipe threads Connect to 1/2″ IPS supply line.

2. Push flange on pot filler,mark locating hole on wall

3. Drill holes and insert plugs

4. Wrap plumber tape (1) around pipe threads.
   Install the gasket (2) and the flange (3) using the 4 screws provided.

5. Place flange trim (1) onto the faucet . Thread faucet ontopipe.
   Tighten securely, but do not overtighten.

6. Screw on pot filler
   Screw in screw by using an 1.5mm allen wrench to fasten pot filler to flange .

• Remove aerator (1) and turn faucet handles (2) to the full on position.

• Turn on cold water supplies and flush water lines for one minute.
  Important : This flushes away any debris that could cause damage to internal parts.

• Check all connections at arrow for leaks.

• Re-tighten if necessary, but do not overtighten.

With 1.8 gpm are compliant with California water effi ciency regulations, Complies with California Proposition 65 and with the Federal Safe Drinking Water Act.
In areas with extremely low water pressure causing the faucet water flow to be unsatisfactory , replace the aerator to improve the water flow in the faucet.

If faucet leaks out of spout or handle – Replace valve cartridge (4). Remove handle(1), ring(3)and screw (2). Unscrew and replace valve cartridge, 1.5 mm hex. Assemble in reverse order. Line up handles with valves in closed position before pushing handles into place.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>