HANNspree HE247DPB 23.6-Inch Widescreen LCD Monitor User Manual

HANNspree HE247DPB 23.6-Inch Widescreen LCD Monitor

Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference.

FCC Class B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device complies with Parts 15 of the FCC Rule. Operation is subject to the following two conditions﹕(1) this device may not cause harmful interference﹔and (2) this device must accept any interference received, including interference that may cause undesired operations.

CANADA
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulation.

【Optional, depending on selected model】
This device complies with requirements of EMC directive 2004/108/EC with regard to Electromagnetic Compatibility, and 2006/95/EC and 93/68/EEC with regard to Low Voltage directive.

【Optional, depending on selected model】
The socket outlet shall be near the equipment and shall be accessible.

RECYCLING INFORMATION
We, the Hanns.G care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end of life. These devices contain recyclable materials, which can be re-decomposed and re- integrated into brand-new marvels. On the contrary, other materials can be classified as hazardous and poisoned substances. We strongly encourage you to contact the provided information to recycle this product. For more information, please visit www.hannsg.com

SAFETY NOTICE

1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
2. Shielded interface cables and AC power cords, if any, must be used in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibility of the user to correct such interference.
4. Only use attachments/accessories specified by the manufacturer.

WARNING:
To prevent fire or shock hazards, do not expose the monitor to rain or moisture. Dangerously high voltages are present inside the monitor. Do not open the cabinet. Refer servicing to qualified personnel only.

PRECAUTIONS

• Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool, or in a wet basement.
• Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure the reliable operation of the monitor and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase or cabinet unless proper ventilation is provided.
• The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
• Unplug the unit during a lightning storm or when it will not be used for a long period of time. This will protect the monitor from damage due to power surges.
• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
• Never push any object into the slot on the monitor cabinet. It could short-circuit parts causing a fire or electric shock. Never spill liquids on the monitor.
• Do not attempt to service the monitor by yourself; opening or removing covers can expose you to dangerous voltages and other hazards. Please refer all servicing to qualified service personnel.
• The wall socket shall be installed near the equipment and shall be easily accessible.

SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with an LCD monitor and do not indicate a problem.

• Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears.
• You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
• The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less such as a missing pixel or a pixel lit all of the time.
• Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours. In this case, the screen is recovered slowly by changing the image or turning off the Power Switch for hours.
• If the screen suddenly flashes erratically or the backlighting fails, please contact your dealer or service center for repair. Do not attempt to repair the monitor yourself.

BEFORE YOU OPERATE THE MONITOR

FEATURES

• 60cm / 23.6” Wide Screen TFT Color LCD Monitor
• Crisp, Clear Display for Windows
• EPA ENERGY STAR®
• GP Green Product
• Ergonomic Design
• Space Saving, Compact Case Design

CHECKING THE CONTENTS OF THE PACKAGE

The product package should include the following items:

LCD Monitor

Cables and User manual

INSTALLATION INSTRUCTIONS

INSTALLATION:

1. Align the monitor with the opening in the base.
2. Note that the longer section of the base points forward.
3. Snap the monitor into its base. A clear-click sound will affirm that the base is connected correctly.
4. Verify that the monitor is securely attached to the base by looking at the bottom of the base and making sure that the clips are fully engaged in the base.
5. Fasten the screw.

REMOVAL:

1. Flip over the monitor so that it is upside down.
2. After loosening the screw, then press the 3 clips on the base that holds the monitor in place.
3. Gently press and hold the 3 clips while pulling the base from the monitor unit they are unattached.

Note:

• For the first time installation, the screw must loosen before attaching the monitor to the base.

POWER

POWER SOURCE:

1. Make sure that the power cord is the correct type required in your area.
2. This LCD monitor has an Internal universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.)
3. Connect the AC power cord on one end to your LCD monitor’s AC input socket, and the other end to the wall outlet.

SETTING THE MONITOR ON THE WALL

DISSEMBLING THE STAND BASE:

1. Disconnect all the cables and cords from the Monitor to prevent breakage.
2. Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the Monitor.
3. Remove the four (4) screws so that the stand base can be removed.
4. Gently remove the stand base.
   

WALL MOUNTING THE MONITOR:

1. Purchase a VESA-compatible wall bracket: VESA 100×100, 4 holes, M4, 10mm, 8kg.
2. Locate your ideal Monitor position on the wall.
3. Fix the wall bracket firmly on the wall.
4. Secure the Monitor to the bracket using the 4 mount holes on the back and center of the Monitor.

Note:

• Please read the instructions of your specific wall bracket to properly wall mount the Monitor.
• The pitch of the mounting holes is 100mm horizontally and 100mm vertically.
• The screw type required is metric: M4, 10mm length.
• The Monitor stand base can be screwed on a table or a hard surface using the hole on the back of the stand base.
• For use only with UL-listed wall mount bracket.

Installing the LCD Monitor requires special skills that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. Hanns.G bears no responsibility for improper mounting or mounting that results in accident or injury. You can ask qualified service personnel about using an optional bracket to mount the Monitor to the wall.

MAKING CONNECTIONS

CONNECTING TO A PC
Turn off your computer before performing the procedure below.

1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer’s VGA port.
2. Connect one end of the DVI cable (optional) to the back of the monitor and connect the other end to the computer’s DVI port.
3. Connect the audio cable between the monitor’s audio input and the PC’s audio output (green port).
4. Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the other end to Wall outlet.
5. Turn on your monitor and computer.

1. LINE IN
2. VGA Input
3. DVI Input (optional)
4. Power AC Input

ADJUSTING THE VIEWING ANGLE

• For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference.
• Hold the stand so you do not topple the monitor when you change the monitor’s angle.
• You are able to adjust the monitor’s angle from -5° to 15°.

NOTES:

• Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.
• Be careful not to place fingers or hands near the hinges when tilting the monitor, otherwise pinching can result.

OPERATING INSTRUCTIONS

GENERAL INSTRUCTIONS
Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences.

• The power cord should be connected.
• Connect the Signal cable from the monitor to the VGA card.
• Press the power button to turn on the monitor. The power indicator will light up.

FRONT PANEL CONTROL

• Power Button:
  • Press this button to switch ON/OFF of the monitor’s power.
• Power Indicator:
  • Green — Power On mode.
  • Orange — Power Saving mode.
• MENU / RETURN:
  • Turn the OSD menu on/off or return to the previous menu.
• Adjust ▲▼:

1. Adjust Brightness and volume when the OSD is off.
2. Navigate through adjustment icons when OSD is ON or adjust a function when the function is activated.

• 【 i 】Button: 《Analog Input Models》

1. The OSD menu is used as《confirmation》function during start-up.
2. The 「Auto adjustment」 function works only for VGA input. (The auto adjustment function is used to optimize the 「horizontal position」, 「vertical position」,「clock」, and 「phase」.)

• 【 i 】Button: 《Digital Input Models》

1. Press【 i 】to enter Source selections. (Selections include VGA, HDMI, etc. The actual selections may vary depending on the models. This function is only available in models with digital inputs)
2. The OSD menu is used as《confirmation》function during start-up.
3. Press and hold this button for more than 3 seconds will start 「Auto Adjust」 function when using VGA input only. (The auto adjustment function is used to optimize the 「horizontal position」,「vertical position」,「clock」,and 「phase」.)

• Hotkeys:

1.  **Restore Brightness and Contrast defaults:**  

To reset both the Brightness and Contrast to their default values, press the 【▲】and 【▼】 keys at the same time.

2.  **ASPECT RATIO:**  

Press【MENU】+【▼】key to change to 「FULL MODE」 or 「FIT MODE」.

3.  **Change Resolution:**  

For similar screen display resolutions (see table below), the screen resolution can be changed by pressing the【MENU】+【▲】button to achieve the optimal display quality.

4.  **Change Preset Mode:**  

[The availability of this function depends upon the selected model] Press【MENU】key for 3 seconds to select one of the following modes「PC」,「MOVIE」,「GAME」,「ECO」. Default is「PC」.

Resolution

640×400@70Hz ↔ 720×400@70Hz
640×400@85Hz ↔ 720×400@85Hz
640×480@60Hz ↔ 720×480@60Hz
1024×768@70Hz ↔ 1280×768@70Hz
1280×768@60Hz ↔ 1360×768@60Hz
1400×1050@60Hz ↔ 1680×1050@60Hz
1400×1050@RB 60Hz ↔ 1680×1050@RB 60Hz
1400×1050@75Hz ↔ 1680×1050@75Hz
1440×900@60Hz ↔ 1600×900@60Hz
1360×768@60Hz ↔ 1366×768@60Hz
1280×960@60Hz ↔ 1600×900@60Hz
** The screen resolutions available will depend on the purchased model.

NOTES:

• Do not install the monitor in a location near heat sources such as radiators or air dust, or in a place subject to direct sunlight, excessive dust or mechanical vibration or shock.
• Save the original shipping box and packing materials, as they will come in handy if you ever have to ship your monitor.
• For maximum protection, repackage your monitor as it was originally packed at the factory.
• To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it.

HOW TO ADJUST A SETTINGS

BRIGHTNESS/ CONTRAST

BRIGHTNESS

| Adjust the brightness value of the display according to your preference. Select「BRIGHTNESS」option to adjust the brightness value.

CONTRAST

| Adjust the contrast value of the display according to your preference. Select「CONTRAST」option to adjust the contrast value.

ACTIVE CONTRAST

| Optimal setting for high-contrast images or videos. The dark and light areas of the image are automatically detected, and the contrast is enhanced to provide a clearer, sharper image. Also, you may select the「ACTIVE CONTRAST」option.

PRESET MODE

| Select the preset mode according to your preference: PC/ MOVIE/ GAME/ ECO [The availability of this function depends upon the selected model]
INPUT SETTING

INPUT SETTING

| Select the 「INPUT SETTING」option to change between analog (VGA) or Digital (DVI) source. Enter the option and select Analog or Digital. [Dual input mode optional]

AUTO SEARCH

| From the Signal Selection menu, select the 「AUTO SEARCH」 option to activate or deactivate the automatic signal search function. [For DVI/ HDMI Input only]
COLOR SETTING
WARM

NATURE (6500K) COOL

| Adjust the color temperature value of the display according to your preference: WARM /NATURE/ COOL.

USER

| Move the cursor to the User option and select it,

1.  To adjust the red, enter the「R」option and adjust the level.

2.  To adjust the green, enter the「G」option and adjust the level.

3.  To adjust the blue, enter the「B」option and adjust the level.

IMAGE SETTING

AUTO ADJUST

| The auto adjustment function is used to optimize the

「H-POSITION」, 「V-POSITION」「, CLOCK」,and 「PHASE」.

[For VGA Input only]
ASPECT RATIO| When the aspect ratio of screen is distorted, you may make adjustments by using this function.「FULL」indicates full screen
 | display, which does not ensure the image is shown as is or in initial scale.「FIT」indicates scaling by the proportion of original images, which may cause the screen showing black bands. [The availability of this function depends upon the selected model]
---|---
__

H-POSITION

| Select the「H-POSITION」option to shift the screen image to the left or right. Enter the option and adjust the level. [For VGA only]
__

V-POSITION

| Select the 「V-POSITION」option to shift the screen image up or down. Enter the option and adjust the level. [For VGA only]
__

CLOCK

| Select the 「CLOCK」option to reduce the vertical flicker of characters on the screen. Enter the option and adjust the level. [For VGA only]
__

PHASE

| Select the「PHASE」option to reduce the horizontal flicker of characters on the screen. Enter the option and adjust the level. [For VGA only]
__

SHARPNESS

| Select the「SHARPNESS」option to adjust the sharpness of the display. Set the value from -2 to 2.
__

__

VIDEO MODE

| Choose「VIDEO MODE」or 「PC MODE」for video transmission. While using HDMI or HDMI to DVI ports for video transmission, the video will appear cut off slightly around the edge; choose「PC MODE」to view videos with complete image. (VIDEO MODE only functions for inputs from HDMI or DVI that supports HDCP video (YUV format))
__

__

RESPONSE TIME

| Setup the display response time through the Response time function. Available settings are MINIMUM, INTERMEDIATE , and MAXIMUM. [This feature is limited to specific models only.]
OSD SETTING
__

LANGUAGE

| Select 「LANGUAGE」 option to change the language of the OSD. Enter the option and select a language. [Reference only, the OSD Language depends on the selected model]
__

H-POSITION

| Select「H-POSITION」option to adjust the horizontal position of the OSD. Enter the option and adjust the level.
__

V-POSITION

| Select 「V-POSITION」option to adjust the vertical position of the OSD. Enter the option and adjust the level.
TRANSPARENCY| Select 「TRANSPARENCY」option to adjust the transparency of
 | the OSD. Enter the option and adjust the level.
---|---
__

OSD TIME-OUT

| Select 「OSD TIME-OUT」option to set the OSD time out from 10 to 100 seconds. Enter the option and adjust the level.
__

OSD COLOR

| To choose the color combination of the OSD window, select

「OSD COLOR」option under 「OSD SETTING」menu, choose modes 1/2/3.

SYSTEM
__

__

AUDIO INPUT

| While transferring via the HDMI port, it is recommended to set AUDIO INPUT to HDMI; if no sound is outputted, it is recommended to select AUDIO INPUT as PC and make sure the PC audio output cable is connected to the monitor’s LINE IN (or AUDIO IN) port. [For HDMI Input only]
__

__

VOLUME

| Select the 「VOLUME」option to change the volume level. Enter the option and adjust the level. [This function applies only to models with incorporated audio.]

●  By high volume, the risk of hearing damage exists.

__

MUTE

| Select the「MUTE」option to switch the function On or Off. [The availability of this function depends upon the selected model.

Adjusting the volume while muted cancels Mute mode.]

__

DDC/CI

| Select the 「DDC/] option to switch the function On or Off. [Dual input mode optional]
__

FACTORY RESET

| Select the 「FACTORY RESET」option to reset to the monitor’s default setting. This will erase the current settings. Enter the option and select On or Off.
__

INFORMATION

| Display Horizontal frequency/Vertical frequency/Resolution information.

PLUG AND PLAY

Plug & Play DDC2B Feature
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request EDID information over the DDC2B channel. THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL.

TECHNICAL SUPPORT (FAQ)

Q & A FOR GENERAL PROBLEMS 

*Power Cord should be connected.

No Plug & Play

| *Check if the PC system is Plug & Play compatible.

*Check if the Video Card is Plug & Play compatible.

*Check if any plug pins on the VGA or DVI connector are bent.

The display is too dark or too bright.| Adjust the Contrast and Brightness Controls.
Picture bounces or a wave pattern is present in the picture| Move electrical devices that may cause electrical interference.

The power LED is ON (orange) but there’s no video or no picture.

| *Computer Power Switch should be in the ON position.

*Computer Video Card should be snugly seated in its slot.

*Make sure the monitor’s video cable is properly connected to the computer.

*Inspect the monitor’s video cable and make sure none of the pins are bent.

*Make sure the computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key.

Missing one of the primary colors (RED, GREEN, or BLUE)| Inspect the monitor’s video cable and make sure that none of the pins are bent.
The screen image is not centered or sized properly.| Adjust pixel frequency CLOCK and PHASE or press hot-key ( i Button).
The picture has color defects (White does not look white)| ****

*Adjust RGB color or select color temperature.

The screen resolution needs to be adjusted

| Use Win 2000/ME/XP Right-click anywhere on the desktop and select Properties > Settings > Screen Resolution. Use the slider to adjust the resolution and click Apply.
No sound is outputted from the monitor’s built-in speaker| Make sure the PC audio output cable is connected to the screen’s LINE IN port (or AUDIO IN port).

*Make sure the sound volume adjustment can be clearly identified.

*Make sure the System > Silence option in the monitor menu is on.

*While transferring via HDMI port but no sound is outputted, it is recommended to select AUDIO
INPUT as a PC option, and make sure the PC audio output cable is connected to the monitor’s LINE IN port(or AUDIO IN port). [For HDMI Input only]

Addendum related to Windows 7

When you encounter display problem under Windows 7, you need to do the following:

__

1.     Make sure your PC computer (Hardware requirement) can support Windows 7.

2.     Make sure your video card can run Windows 7.

3.    If your video card can support Windows 7, need to install the latest Win 7 driver of your video card.

__

Suggest to do the following:

1.     Install the latest Windows 7 video driver of your video card.

2.     Try to use the recommended display resolution that is supported by the monitor.

3.    If the recommended display resolution is not working, try the second recommended display resolution.

 | 1| 2|
35,56cm / 14” (16:9)| 1366×768@60Hz| 1366×768@50Hz
39,6cm / 15.6” (16:9)| 1366×768@60Hz| 1366×768@75Hz
40,64cm / 16” (16:9)| 1366×768@60Hz| 1366×768@50Hz
43,2cm / 17” (16:10)| 1440×900@60Hz| 1440×900@75Hz
47cm / 18.5” (16:9)| 1366×768@60Hz| 1366×768@75Hz
48,3cm / 19” (5:4)| 1280×1024@60Hz| 1280×1024@75Hz
48,3cm / 19” (16:10)| 1440×900@60Hz| 1440×900@75Hz
51cm / 20” (16:9)| 1600×900@60Hz| 1600×900@50Hz
56cm / 22” (16:10)| 1680×1050@60Hz| 1680×1050@50Hz
54,6cm / 21.5” (16:9)

58,4cm / 23” (16:9)

60cm / 23.6” (16:9)

62,5cm / 24.6 (16:9)

| __

1920×1080@60Hz

| __

1920×1080@50Hz

70cm / 27.5” (16:10)| 1920×1200@60Hz| 1920×1200@50Hz
And if you still have display problems after doing the above procedure, please visit Hanns. G support and Service Website: http://www.hannsg.com

ERROR MESSAGE & POSSIBLE SOLUTIONS

• CABLE NOT CONNECTED:

1. Check that the signal cable is properly connected, if the connector is loose, tighten the connector’s screws.
2. Check the signal cable’s connection pins for damage.

• INPUT NOT SUPPORT:
  Your computer has been set to unsuitable display mode, set the computer to the display mode given in the following table.

FACTORY PRESET TIMING TABLE:

MODE| RESOLUTION| HORIZONTAL FREQUENCY (KHz)| VERTICAL FREQUENCY (Hz)
---|---|---|---
1| 640×400 @70Hz| 31.469| 70.087
2| 640×480 @60Hz| 31.469| 59.940
3| 640×480 @70Hz| 36.052| 70.004
4| 640×480 @67Hz| 35.000| 66.667
5| 640×480 @72Hz| 37.861| 72.809
6| 640×480 @75Hz| 37.500| 75.000
7| 720×400 @70Hz| 31.469| 70.087
8| 800×600 @56Hz| 35.156| 56.250
9| 800×600 @60Hz| 37.879| 60.317
10| 800×600 @72Hz| 48.077| 72.188
11| 800×600 @75Hz| 46.875| 75.000
12| 832×624 @75Hz| 49.725| 75.000
13| 1024×768 @60Hz| 48.363| 60.004
14| 1024×768 @70Hz| 56.476| 70.069
15| 1024×768 @75Hz| 60.023| 75.029
16| 1152×870 @75Hz| 68.681| 75.062
17| 1152×864 @75Hz| 67.500| 75.000
18| 1280×720 @60Hz| 45.000| 60.000
19| 1280×960 @60Hz| 60.000| 60.000
20| 1280×960 @75Hz| 74.592| 74.443
21| 1280×768 @60Hz| 47.776| 59.870
22| 1280×768 @75Hz| 60.289| 74.893
23| 1280×1024 @60Hz| 63.981| 60.020
24| 1280×1024 @75Hz| 79.976| 75.025
25| 1360×768 @60Hz| 47.712| 60.015
26| 1440×900 @60Hz| 55.469| 59.901
27| 1440×900 @75Hz| 70.635| 74.984
28| 1400×1050 @60Hz| 64.744| 59.948
---|---|---|---
29| 1680×1050 @60Hz| 65.290| 59.954
30| 1920×1080 @60Hz| 67.500| 60.000

(Video mode)

** We ensure that the monitor can be lighted under interlace signal mode, but we can not guarantee the image quality.

APPENDIX

SPECIFICATIONS

LCD Panel

| Driving system| TFT Color LCD
---|---|---
Size| 60cm / 23.6” Diagonal
Pixel pitch| 0,2715mm(H) × 0,2715mm(V)
Video| H-Frequency| 24KHz – 83KHz
V-Frequency| 55Hz – 75Hz
Display Colors| 16.7M Colors
Max. Resolution| 1920 × 1080 @60Hz
Plug & Play| VESA DDC2BTM

Power consumption

| ON Mode| 28W (Typical)
Power Saving Mode| ≤0.5W
OFF Mode| ≤0.5W
Audio output| Rated Power 1.5W rms (Per channel)

Input Terminal

| VGA

DVI (optional)

Maximum Screen Size| Hor. : 521.3mm Ver. : 293.2mm
Power Source| 100–240V ～1.0A 50–60Hz
Environmental Considerations| Operating Temp:5° to 35°C Storage Temp.: -20° to 60°C Operating Humidity: 20% to 85%
Dimensions| 560.8 (W)×399.3 (H)×219.8 (D) mm

22.1 ”(W)×15.7 ”(H)×8.7 ”(D)

Weight (NW)| 4.5 kg (9.9 lb)

*** The above specification is subject to actual product specification and is subject to change without prior notice.

NOTES:
The Maximum Resolution will depend on the display card support. Related issues can refer to the www.hannsg.com FAQ section.

FAQ’s

What is the screen size of the HANNspree HE247DPB monitor?

The HANNspree HE247DPB has a 23.6-inch widescreen LCD display.

What is the resolution of the monitor?

The monitor has a Full HD resolution of 1920 x 1080 pixels, providing sharp and clear visuals.

Does the HANNspree HE247DPB support multiple video inputs?

Yes, the monitor offers multiple video inputs, including VGA and DVI, allowing you to connect various devices.

Does this monitor have built-in speakers?

No, the HANNspree HE247DPB does not have built-in speakers. You will need external speakers or headphones for audio output.

Can the monitor be wall-mounted?

Yes, the HANNspree HE247DPB is VESA mount compatible, making it easy to mount on a wall with the appropriate VESA mounting kit.

Does the monitor have an adjustable stand?

Yes, the monitor comes with a tilt-adjustable stand, allowing you to adjust the viewing angle for better comfort.

What is the response time of the monitor?

The HANNspree HE247DPB has a fast response time of 5 milliseconds (ms), reducing motion blur for smoother visuals during fast-paced content.

Is this monitor suitable for gaming?

Yes, the monitor's fast response time and Full HD resolution make it suitable for gaming, providing an enjoyable gaming experience.

Can I connect my gaming console to this monitor?

Yes, you can connect gaming consoles or other compatible devices to the monitor using the available video inputs.

Does the HANNspree HE247DPB have an eco-friendly mode?

Yes, the monitor typically includes an Eco mode that helps reduce power consumption, contributing to energy savings.

What is the aspect ratio of the display?

The monitor has a widescreen aspect ratio of 16:9, making it ideal for watching movies and widescreen content.

Is the monitor suitable for office use or professional work?

Yes, the HANNspree HE247DPB is suitable for office use and professional work, offering a clear and spacious screen for productivity tasks and general computer use.

References:HANNspree HE247DPB Widescreen LCD Monitor – Device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>