PureLink AV MVS-21 4K60 HDMI 2×1 Switch with Motore Up Down Scaling User Manual

PureLink AV MVS-21 4K60 HDMI 2×1 Switch with Motore Up Down Scaling

Introduction

• The PureLink MVS-21 provides 2×1 switching, multiview, and scaling conversion for two sources on a single screen. The user can easily manage each input and create any layout and position of any of the two inputs on a single monitor.
• This device supports full range of input video resolutions up to 4K@60 and audio RCA /Optical de-embedding supported for external audio distribution systems.
• This device can be controlled via front panel buttons, IR remote, RS-232 commands.

Features

• HDMI 2.0b, HDCP 2.2 and HDCP 1.x compliant
• 18Gbps video bandwidth
• Input and output resolutions support up to 4K2K@60 4:4:4
• LPCM, AC3, DD+, DTS, DTS-HD, up to 7.1 audio channel
• Seamless switching between input channels and combined multiple images on single UHD monitor
• Up to 4 display modes: SINGLE, PIP, PBP (1), PBP (2)
• Audio de-embedding via analog and optical fiber audio ports
• volume control and independent audio selection
• EDID management
• Control via front panel buttons, IR remote, RS-232 commands
• Compact design for easy and flexible installation

Package Contents

• 1 x 4K60 2×1 Multiviewer Seamless UHD Video Switcher
• 1 x IR Remote
• 1 x 3pin-3.81mm Phoenix Connector (male)
• 1 x 38KHz IR Wideband Receiver Cable (1.5 meters)
• 2 x Mounting Ears
• 4 x Machine Screws (KM3*4)
• 1 x 12V/1A Locking Power Adapter

Specifications

Technical|
---|---
HDMI Compliance| HDMI 2.0b
HDCP Compliance| HDCP 2.2 / 1.x
Video Bandwidth| 18Gbps
Video Resolution| Up to 4K2K@60 4:4:4
IR Level| 5Vp-p
IR Frequency| 38KHz
Color Space2 / 14| RGB, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Color Depth| 8bit
**** Audio Formats|

• HDMI: PCM2.0/5.1/7.1CH, Dolby Digital/Plus, DTS, DTS High Res
• Analog audio [3.5mm L/R]: PCM2.0;
• SPDIF (OPTICAL): Dolby Digital, DTS 5.1, PCM2.0.
• Note: It does not support HBR audio.

ESD Protection| Human body model — ±8kV (Air-gap discharge) & ±4kV (Contact discharge)
Connection

Input ports| 2 x HDMI IN [Type A, 19-pin female]
**** Output ports|

• 1 x HDMI OUT [Type A, 19-pin female] 1 x L/R OUTPUT [RCA]
• **** 1 x OPTICAL OUTPUT [S/PDIF]

Control ports| 1 x RS-232 [3pin-3.81mm phoenix connector] 1 x IR EXT [3.5mm Stereo Mini-jack]
Mechanical
Housing| Metal Enclosure
Color| Black
Dimensions| 175mm [W] x 100mm [D] x 30mm [H]
Weight| 497g
Power Supply|

• Input: AC 100 – 240V 50/60Hz
• Output: DC 12V/1A (US/EU standard, CE/FCC/UL certified)

Power Consumption| 4.56W (Max)
Operating Temperature| 32 – 104°F / 0 – 40°C
Storage Temperature| -4 – 140°F / -20 – 60°C
Relative Humidity| 20 – 90% RH (non-condensing)

Operation Controls and Functions

Front Panel

• Short press this button to power on the device.
• Long press this button for 1 seconds to enter the standby mode.

2| Power LED| The Power LED will light in green when the product is powered on, and red when the product is on standby.
3| Input 1-2 LEDs| Input signal indicator lights. When the HD 1/2 port connects with an active source device, the corresponding green LED will be on. Note: Only the LED of the selected input channel will illuminate green on single screen display mode; all LEDs will illuminate green on Multiview mode.
4| IR Window| IR signal receiving window.
5| INPUT button| Input source switching button, only available on single screen display mode.
6| Multiview button| Multiview display mode switching button.

• Short press this button to circularly select
• SINGLE – PIP – PBP (1) – PBP (2) .
• Long press this button for 3 seconds to select the aspect ratio for PBP (1) / PBP (2)

7| RES button| Output resolution switching button.

• Short press the RES button to circularly switch the output resolution of the HDMI OUTPUT port (Please refer to the output resolution list of “8. Video & Audio”).
• Long press the RES button for 3 seconds to switch the output resolution to 720P60.

Rear Panel

port

| Optical fiber digital audio output port.
3| HDMI OUTPUT port| HDMI signal output port, connected to HDMI display device such as TV or Monitor with HDMI cable.

4

| HD 1-2 INPUT ports| HDMI signal input ports, connected to HDMI source device such as DVD or Set-top box with HDMI cable.
5| 5 / 14 RS-232 port| 3-pin phoenix connector, connected to a PC or control system for serial port upgrade or RS-232 command control.
6| IR EXT port| IR signal receiving port, connected with 38KHz IR Receiver cable.
If the IR signal receiving window of the unit is blocked or the unit is installed in a closed area out of infrared line of sight, the IR receiver cable can be inserted to the “IR EXT” port to receive the IR remote signal.
7| DC 12V| DC 12V/1A power input port.

IR Remote

1. Power on or Standby : Press this button to power on the switcher or set it to standby mode.
2. Baud: Press this button to pop up OSD menu, then circularly select the five serial port Bauds: 115200, 57600, 38400, 19200, 9600
3. Multiview display mode buttons: Press these buttons to select SINGLE – PIP – PBP (1)
   • PBP (2). 6 / 14
4. WIN1: These buttons are available in all mode.
   • Press these buttons to select input source HD1 or HD2 or on single screen display mode, and the corresponding input LED on the front panel will light in green.
   • Press these buttons to select WIN1 screen input source HD1 or HD2 or in PIP / PBP(1) /
   • PBP(2) mode, and both input LEDs on the front panel will illuminate green.
5. WIN2: These buttons are unavailable in single screen display mode.
   • Press these buttons to select WIN2 screen input source HD1 or HD2 or in PIP / PBP(1) / PBP(2) mode, and both input LEDs on the front panel will illuminate green.
6. SET: Press POS to change the position of sub window in PIP mode; Press SIZE nto zoom in or out the size of sub window in PIP mode; Press 16:9 to switch aspect ratio between 16:9 and FULL in PBP(1) / PBP(2) mode.
7. AUDIO: Press Mute to mute / unmute the audio; Press VOL- / VOL+ to increase / decrease the audio output volume.
8. Resolution: Press 4K, 1080P, 720P or XGA to select output resolution.
9. EDID: Press 4K2.0, 4K5.1, 2K2.0 or COPY to select EDID mode.

EDID Settings
Select from the following EDID modes via RS-232 command or OSD menu navigation.

Video & Audio

• The switcher provides multiple resolution video input up to 3840×2160@60, and multiple audio formats such as LPCM, AC3, DD+, DTS, DTS- HD, up to 7.1 channel pass through function via HDMI cable.
• Users can control the volume of audio in LPCM format.

The switcher allows the following video output resolutions;

Multiview
The switcher has 4 categories of Multiview display modes: SINGLE, PIP, PBP (1), PBP (2) Users can select different operations for different Multiview modes as following

SINGLE: Inputs selection

• PIP : Inputs selection, Sub window size and position selection PBP (1), PBP (2): Inputs selection,
• Display mode selection, Display aspect selection Multiview window distributions are as following

Users can select Multiview modes via RS-232 commands or OSD menu navigation.

OSD Menu Navigation
A total of four buttons on the IR Remote are used for audio setting on OSD menu navigation, including Baud, Mute, VOL-, VOL+.

Menu contents are as follows

RS-232 Command
Connect the RS-232 port of the product to a PC with a 3-pin phoenix connector cable.

ASCII Commands

Serial port protocol: baud rate: 115200(default) Data bits: 8     Stop bits: 1 Check bit: 0
x – Parameter 1 ; y – Parameter 2; ! – Delimiter
Command Code| Function Description| Example| Feedback
System Setting
help!| List all commands| help!|
r type!| Get device model| r type!| MVS-21
r fw version!| Get Firmware version| r fw version!| MCU FW version x.xx.xx SCALER FW version x.xx.xx
power z!|

• Power on/off the device,z=0~1
• (z=0 power off, z=1 power on)

| power 1!|

• Power on
• System Initializing… Initialization Finished! MCU FW version x.xx.xx
• SCALER FW version x.xx.xx

r power!| Get current power state| r power!| power on/power off
reboot!| 9 / 14 Reboot the device| reboot!|

• Reboot…
• System Initializing… Initialization Finished! MCU FW version x.xx.xx
• SCALER FW version x.xx.xx

reset!| Reset to factory defaults| reset!|

• Reset to factory defaults
• System Initializing… Initialization Finished! MCU FW version x.xx.xx
• SCALER FW version x.xx.xx

Output Setting
s output res x!| Set Output Resolution (x=1~14)

1. 4096x2160p60,
2. 4096x2160p50,
3. 3840x2160p60,
4. 3840x2160p50,
5. 3840x2160p30,
6. 3840x2160p25,
7. 1920x1200p60RB,
8. 1920x1080p60,
9. 1920x1080p50,
10. 1360x768p60,
11. 1280x800p60,
12. 1280x720p60,
13. 1280x720p50,
14. 1024x768p60,

| s output res 3!| out resolution: 3 840x2160p60
r output res!| Get output resolution| r output res!| out resolution: 3840x2160p60
s output hdcp x!| set output hdcp (x=1~3)

1. HDCP 1.4
2. HDCP 2.2
3. 1.0H/ 1D4CP OFF

| s output hdcp 2!| output HDCP : HDCP 1.4
r output hdcp!| Get output hdcp status.| r output hdcp!| output HDCP : HDCP 1.4
s output vka x!| Set output video keep active pattern. (x=1~2)

1. black screen
2. blue screen

| s output vka 1!| output VKA pattern : black screen
r output vka!| Get output video keep active pattern.| r output vka!| output VKA pattern: black screen
s output itc x!| Set output video mode (x=1~2) 1: video mode 2: pc mode| s output itc 1!| output ITC : video mode
r output itc!| Get output video mode| r output itc!| o utput ITC: video mode
Command Code| Function Description| Example| Feedback
---|---|---|---
EDID Setting
s input EDID x!| Set HDMI input EDID mode (x=18)

1. 4K2K60_444,Stereo Audio 2.0

2. 4K2K60_444,Dolby/DTS 5.1

3. 4K2K60_444,HD Audio 7.1

4. 4K2K30_444,Stereo Audio 2.0

5. 4K2K30_444,Dolby/DTS 5.1

6. 4K2K30_444,HD Audio 7.1

7. 1080P,Stereo Audio 2.0

8. 1080P,Dolby/DTS 5.1

9. 1080P,HD Audio 7.1

10. 1920×1200,Stereo Audio 2.0

11. 1680×1050,Stereo Audio 2.0

12. 1600×1200,Stereo Audio 2.0

13. 1440×900,Stereo Audio 2.0

14. 1360×768,  Stereo Audio   2.0

15. 151./112480×1024,Stereo          Audio 2.0

16. 1024×768,Stereo Audio    2.0

17. 720p,Stereo Audio 2.0

18. copy from HDMI out

| s input EDID 1!| input EDID:4 K2K60_444, Stereo Audio 2.0
r input EDID!| Get input EDID mode| r input EDID!| input EDID: 4K2K60_444, Stereo Audio 2.0
Audio Setting
s output audio x!| Set output audio source (x=0~2)

0. follow window 1 selected source

1. HDMI 1 input audio
2. HDMI 2 input audio

| s output audio 0!| output audio: follow window 1 selected source
r output audio!| Get output audio source| r output audio!| output audio : follow window 1 video
s output audio vol+!| Increase output audio volume| s output audio vol+!| output audio volume: 50
s output audio vol-!| Decrease output audio volume| s output audio vol-!| output audio volume: 50
s output audio vol x!| Set output audio volume value (x=0~100)| s output audio vol 30!| output audio volume: 30
r output audio vol!| Get output audio volume| r output audio vol!| output audio volume: 30
Command Code| Function Description| Example| Feedback
---|---|---|---
s output audio mute x!| Set output audio mute on/off (x=0~1)

1. mute off
2. mute on

| s output audio mute 0!| output audio mute: off
r output audio mute!| Get output audio mute on/off| r output audio mute!| output audio mute : off
Single Screen Mode Setting
s auto switch x!| Enable/disable auto switch feature(x=0~1)

1. Disable auto switch
2. Enable auto switch

| s auto switch 0!| auto switch off
r auto switch!| Get auto switch feature| r auto switch!| auto switch off
s in source x!| Route input source to output (1~2)

1. HDMI 1
2. HDMI 2

| s in source 1!| HDMI 1
r in source!| Get output secected input source| r in source!| HDMI 1
Multi-viewer Mo 1 d 2 e / 1 S 4 etting| |
s multiview x!| Set multi-viewer display mode (x=1~3)

1. single screen
2. PIP
3. PBP

| s Multiview 1!| single screen
r multiview!| Get multi-viewer display mode| r multiview!| single screen
s window x in y!| Select one input for one display  window for  the  current Multiview mode. (x=1~2)

1. window 1
2. window 2 (y=1~2)
3. HDMI 1
4. HDMI 2

| s window 1 in 1!| window 1 select HDMI 1
Command Code| Function Description| Example| Feedback
---|---|---|---
r window x in!| Get windows selected input source (x=0~2) 0. ALL

1. window 1
2. window 2

| r window 1 in!| window 1 select HDMI 1
s PIP position x!| Set PIP window position (x=1~4)

1. Left Top
2. Left Bottom
3. Right Top
4. Right Bottom

| s PIP position 3!| PIP on right top
r PIP position!| Get PIP window positon| r PIP position!| PIP on right top
s PIP size x!| Get PIP window size (x=1~3)

1. small
2. middle
3. large

| s PIP size 3!| PIP size: l arge
r PIP size!| Get PIP window size| r PIP size!| PIP size: large
s PBP mode x!| Set PBP windows display mode (x=1~2)

1. PBP mode 113 / 14
2. PBP mode 2

| s PBP mode 1!| PBP mode 1
r PBP mode!| Get PBP windows display mode| r PBP mode!| PBP mode 1
s PBP aspect x!| Set PBP windows display aspect ratio (x=1~2)

1. Full screen
2. 16:9

| s PBP aspect 1!| PBP aspect : full screen
r PBP aspect!| Get PBP windows display aspect ratio| r PBP aspect!| PBP aspect: full screen

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>