stryker 6385 Power-Pro TL Cot Fastener User Manual

June 12, 2024
stryker

stryker 6385 Power-Pro TL Cot Fastener

stryker-6385-Power-Pro-TL-Cot-Fastener-PRODUCT-IMG

Warning/Caution/Note Definition
The words WARNING, CAUTION, and NOTE carry special meanings and should be carefully reviewed.
WARNING
Alerts the reader about a situation that, if not avoided, could result in death or serious injury. It may also describe potential serious adverse reactions and safety hazards.
CAUTION
Alerts the reader of a potentially hazardous situation which, if not avoided, may result in minor or moderate injury to the user or patient or damage to the product or other property. This includes special care necessary for the safe and effective use of the device and the care necessary to avoid damage to a device that may occur as a result of use or misuse.
Note – Provides special information to make maintenance easier or important instructions clearer.

Introduction for service

This manual assists you with the service of your Stryker product. Read this manual to service this product. This manual does not address the operation of this product. See the Operations Manual for operating and use instructions. To view your Operations Manual online, see https://techweb.stryker.com/.

Expected service life
Cot fasteners have a seven-year expected service life under normal use conditions and with appropriate periodic maintenance.

Contact information

  • Contact Stryker Customer Service or Technical Support at: 1-800-327-0770.
  • Stryker Medical
  • 3800 E. Centre Avenue
  • Portage, MI 49002 USA

Note – The user and/or the patient should report any serious product- related incident to both the manufacturer and the competent authority of the European Member State where the user and/or patient is established. To view your operations or maintenance manual online, see https://techweb.stryker.com/. Have the serial number (A) of your Stryker product available when calling Stryker Customer Service or Technical Support. Include the serial number in all written communication.

Serial number location

Preventive maintenance

Fastener lubrication

Note

  • Tri-Flow™ with Teflon® lubricant may be used to reduce the force required to secure and release the cot, minimize wear, or if the pedal does not stay down with the cot removed.
  • Do not use silicone, WD-40®, or lithium grease. They could harm the moving parts of the cot fastener system.

To lubricate the fastener

  1. Remove the back fastener cover.
  2. Spray Tri-Flow™ with Teflon® lubricant (6082-199-012) onto the area indicated below (A) (Figure 1).

stryker-6385-Power-Pro-TL-Cot-Fastener-FIG-2

Regular inspection and adjustments

  • The following schedule is a general guide to maintenance. Factors such as weather, terrain, geographical location, and individual usage will alter the required maintenance schedule. If you are unsure how to perform these checks, contact your
  • Stryker Service Technician. If you are in doubt as to what intervals to follow in maintaining your product, consult your
  • Stryker Service Technician. Check each routine and replace worn parts if necessary.
Routine Every
  1 month
Cot and cot fastener fit and function  
All fasteners are secure  
Lubricate the lock (see Fastener lubrication above) As needed

Maintenance record

Date Maintenance operation performed By Hours
     
     

Training record

 | Training date|
---|---|---
Trainee name| Basic training| Refresher update| Owner’s manual, in-service, formal class, etc.
 |  |  |
 |  |  |

Model 6385 cot fastener assembly

  • 6385-001-010 Rev AA (Reference only)

stryker-6385-Power-Pro-TL-Cot-Fastener-FIG-3

Item Number Name Quantity
A 0003-109-000 Hex head cap screw 2
B 0003-112-000 Hex head cap screw 7
C 0012-058-001 Lock washer 7
D 6360-030-012 Floor plate, small 7
E 6385-001-012 Foot end fastener assembly (page 12) 1
F 6385-001-013 Antler assembly 1
G 6385-001-080 Back cover 1
H 6385-001-100 Label, specification 1
J 6385-001-926 Label, DPM 1
K 0025-079-000 Dome head rivet 2
L 639000010901 Label, EAR 1

Model 6386 cot fastener assembly

  • 6386-001-010 Rev AA (Reference only)

stryker-6385-Power-Pro-TL-Cot-Fastener-FIG-4

Item Number Name Quantity
A 0001-184-000 Flathead socket screw 7
B 0003-109-000 Hex head cap screw 2
C 0011-014-000 Flat washer 7
D 0016-401-000 Nylock hex nut 7
E 6385-001-012 Foot end fastener assembly (page 12) 1
F 6385-001-013 Antler assembly 1
G 6385-001-080 Back cover 1
H 6386-001-926 Label, DPM 1
J 6385-001-106 Lock down the base plate 2
K 6385-001-100 Label, specification 1
L 0025-079-000 Dome head rivet 2
M 639000010901 Label, EAR 1

Model 6387 cot fastener assembly

  • 6387-001-010 Rev AA (Reference only)

stryker-6385-Power-Pro-TL-Cot-Fastener-FIG-5

Item Number Name Quantity
A 0001-184-000 Flathead socket screw 7
B 0003-109-000 Hex head cap screw 2
C 0011-014-000 Flat washer 7
D 0016-401-000 Nylock hex nut 7
E 6385-001-012 Foot end fastener assembly (page 12) 1
F 6385-001-013 Antler assembly 1
G 6385-001-080 Back cover 1
H 6387-001-926 Label, DPM 1
J 6385-001-107 Lockdown base plate 2
K 6385-001-100 Label, specification 1
L 0025-079-000 Dome head rivet 2
M 639000010901 Label, EAR 1

Model 6388 cot fastener assembly

  • 6388-001-010 Rev AA (Reference only)

stryker-6385-Power-Pro-TL-Cot-Fastener-FIG-6

Item Number Name Quantity
A 0001-184-000 Flathead socket screw 7
B 0003-109-000 Hex head cap screw 2
C 0011-014-000 Flat washer 7
D 0016-401-000 Nylock hex nut 7
E 6385-001-012 Foot end fastener assembly (page 12) 1
F 6385-001-013 Antler assembly 1
G 6385-001-080 Back cover 1
H 6385-001-100 Label, specification 1
J 6388-001-106 Lock down the base plate 2
K 6388-001-080 Lockdown washer (not shown) 8
L 6388-001-926 Label, DPM 1
M 0025-079-000 Dome head rivet 2
N 639000010901 Label, EAR 1

Model 6389 cot fastener assembly

  • 6389-001-010 Rev AA (Reference only)

stryker-6385-Power-Pro-TL-Cot-Fastener-FIG-7

Item Number Name Quantity
A 0001-184-000 Flathead socket screw 7
B 0003-109-000 Hex head cap screw 2
C 0011-014-000 Flat washer 7
D 0016-401-000 Nylock hex nut 7
E 6385-001-012 Foot end fastener assembly (page 12) 1
F 6385-001-013 Antler assembly 1
G 6385-001-080 Back cover 1
H 6385-001-100 Label, specification 1
J 6388-001-107 Lock down the base plate 2
K 6389-001-080 Lockdown washer (not shown) 8
L 6389-001-926 Label, DPM 1
M 0025-079-000 Dome head rivet 2
N 639000010901 Label, EAR 1

Foot-end fastener assembly

  • 6385-001-012 Rev AA (Reference only)

stryker-6385-Power-Pro-TL-Cot-Fastener-FIG-8 stryker-6385-Power-Pro-TL-Cot-Fastener-FIG-9

Item Number Name Quantity
A 0003-109-000 Hex head cap screw 4
B 0003-113-000 Hex head cap screw 1
C 0003-390-000 Hex head cap screw 4
D 0011-077-000 Washer 4
E 0016-028-000 Fiberlock hex nut 6
F 0025-079-000 Dome head rivet 4
G 638500010015 Spring retaining bracket 1
H 0038-590-000 Extension spring 4
J 0038-591-000 Extension spring 1
K 0055-100-076 Riv nut 2
M 6060-090-114 Label, Warning 2
N 6385-001-050 Plate, bottom, weldment 1
R 6385-001-082 Inside hook 2
T 6385-001-085 Main link 1
U 6385-001-086 Flange bearing 2
V 6385-001-087 Pedal spacer 2
W 6385-001-088 Pedal 1
Y 6385-001-090 Main rod 1
AA 6385-001-091 Rod spacer 1
AB 6385-001-092 Top rod 1
AC 6385-001-093 Bottom slide 1
AD 6385-001-094 Bottom roller 2
Item Number Name Quantity
--- --- --- ---
AE 6385-001-095 Link stop 1
AF 6385-001-097 Slide bushing 2
AG 6385-001-098 Lock pin 1
AH 6385-001-099 Slot cover 2
AJ 6080-090-023 Label, RUGGED 1

Stryker Medical

  • 3800 E. Centre Avenue
  • Portage, MI 49002
  • USA
  • 6385-009-002 Rev AA.0
  • WCR: AC.3

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

stryker User Manuals

Related Manuals