FineMolds FM2201 Probe Plus Smart Wireless Thermometer User Manual

FineMolds FM2201 Probe Plus Smart Wireless Thermometer

Specifications

• Model: [Insert Model Number]
• Dimensions: [Insert Dimensions]
• Weight: [Insert Weight]
• Power Source: [Insert Power Source]
• Material: [Insert Material

Maintenance
Regular maintenance is essential for product longevity. Clean  the product after each use according to the instructions provided in the manual. Ensure proper storage when not in use.

Frequently Asked Questions (FAQ)
Q: How do I troubleshoot if the product is not working?
A: If the product is not working, check the power source, and connections, and consult the troubleshooting section in the user manual. If issues persist, contact customer support for assistance.

Q: Can I use the product for outdoor purposes?
A: This product is designed for indoor use only. Using it outdoors may damage the product and void the warranty.

PROBE PLUS
Smart Wireless Thermometer

Thank you for choosing PROBE PLUS!
Only a few steps away to use the PROBE PLUS for cook.

Get Started

Repeater/ Function of Indicated Lights/ Buttons

• The connection status between the probe and repeater, and the charging status of probe.

  • Connection Status:

  • Red Light Flashing: The probe is disconnected with the repeater.

  • Green Light Flashing: The probe is connected with repeater.
    Probe Power(When the probe is placed back into dock):

  • Red Light On: The probe is charging.

  • Red Light Off: The probe is fully charged.

• The connection status between the repeater and mobile device.

  • Red Light Flashing: The repeater is disconnected with the mobile device.
  • Green Light Flashing: The repeater is connected with the mobile device.

• Indicates the battery level of repeater.

  • 3 Bars: 90%-100% Power of repeater.
  • 2 Bars: 40%-90% Power of repeater .
  • 1 Bar: 10%~30% Power of repeater.
  • Empty: Less than 10% or no Power of repeater.

• Indicates the battery’s charging status of repeater.

  • Red Light : The repeater is charging.
  • Green Light : The repeater is fully charged.

Specification

Download APP

Scan the following QR code to download and install the APP.

Warnings
Android System

1. PROBE PLUS is designed for use in meat(food).
2. The charger dock is non-waterproof, do not immerse it in water or other liquids.
3. To avoid damage the probe, insertion of the probe in the meat pass the Safety Notch in necessary.
4. PROBE PLUS probes are not dishwasher safe. Please hand wash with soap and water before and after each use.
5. PROBE PLUS is water resistant, not fully waterproof, do not submerge in water for long periods of time.
6. Please take caution with the pointed tip of the probe.
7. The probe will be very hot during or just after cooking. Do not touch with bare hands.
8. Do not submerge the probe in cold water after cooking. Wait until it has cooled down prior to washing.
9. The maximum temperature of the probe is 212° F(100° C). The internal temperature above 212° F(100° C) may potentially damage the probe.
10. The max temperature resistance of the internal sensor is 185° F (85° C). To prolong the service life of the probe, it’s better to keep the internal temperature below 185° F (85° C).
11. When cooking, ensure any part of the probe is not touching any HOT cooking surface.
12. PROBE PLUS product is not a toy, please keep it away from children.
13. When not in use, put the probe back into the dock, and store the product in a dry and cool place.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.

Warranty

If there is a functional failure within 12 months from the day after you sign for it, it will be tested and confirmed by the after-sales service center, and you can enjoy the free maintenance services.

Non-Warranty

1. Unauthorized repair, misuse, collision, abuse, accident, alteration, improper use of accessories other than this product.
2. The valid ity period of three packs has been exceeded.
3. Damage caused by force majeure.
4. This product and its accessories have functional failures due to human reasons.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>