Lucci decor 271110 Hiro 1 Light Floor Lantern with Handmade Paper Shade Instruction Manual
- June 4, 2024
- Lucci decor
Table of Contents
271110 Hiro 1 Light Floor Lantern with Handmade Paper Shade
Instruction Manual
271110 Hiro 1 Light Floor Lantern with Handmade Paper Shade
HIRO LANTERN FLOOR LAMP
SKU# 271110
Rated Voltage 220-240V~ 50Hz
Thank you for purchasing this quality Lucci product. To ensure correct
function and safety, please read and follow all instructions carefully before
assembly, installation, and use of this product. Please keep the instructions
for future reference.
Warranty
- This luminaire is covered by a 12-month warranty from the date of purchase. Please retain the proof of purchase.
- The warranty will be void if there is any damage due to improper usage or modification of the luminaire.
- Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the warranty.
Installation Requirements
-
Select a suitable location for this luminaire:
– Ensure it is on a flat and stable surface.
WARNING: The luminaire is only suitable for placing on a flat and stable surface. DO NOT hang the luminaire during normal use. The handle of the luminaire is NOT for hanging purposes.
– This product is suitable for indoor use only.
WARNING: DO NOT place the product in the kitchen and bathroom area.
– Do not place flammable material near or over the luminaire.
– Ensure the luminaire is not installed in the direct line of an air vent/system.
– If the luminaire is placed in an area prone to moisture, ensure that the area is well-ventilated, and an appropriately rated exhaust fan is used if required. Damage or corrosion caused by moisture is not a product fault, and as such is not covered under warranty. -
Do not exceed the maximum wattage rating.
-
Take care not to pull any electrical wires during unpacking as this may damage the connection.
-
Lay out all the components on a smooth surface and make sure no components are missing before assembling.
If parts are missing, return the complete product to the place of purchase for inspection or replacement. -
Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears damaged in any way. Return the complete product to the place of purchase for inspection, repair, or replacement.
-
Do not plug into the mains power socket-outlet before or during assembly. Only do so after the portable lamp is fully assembled with the globe installed and is ready to use for the first time.
Installation Directions
Remove all packaging material from the product and be careful not to throw away accessories that may be hidden within the packaging material. To help with assembly, lay the fitting on its side on a smooth nonscratched surface.
-
Install the legs onto the frame.
-
Install the lamp holder onto the frame and secure it with the screw cap.
-
Install an E27 globe (Not included) into the lamp holder.
WARNING: DO NOT exceed the maximum rated wattage of 10W. ONLY LED globes are allowed. -
Install the lamp shade onto the frame.
-
Select a suitable location for the luminaire. See the installation requirements above.
-
Insert the plug into the mains power socket outlet and ensure it is fully plugged in.
-
Turn the power on at the mains power socket outlet.
-
Use the cord-line switch to turn the luminaire on/off.
Safety Tips
- Always ensure the power is OFF and the luminaire has cooled down before performing any maintenance, cleaning, changing the globe, or making any adjustments to the luminaire.
- This luminaire’s external flexible cable or cord cannot be replaced; if the cable or cord is damaged, the luminaire shall be destroyed.
- To avoid injury or damage to the luminaire, ensure that power leads and screws are secure before connecting the power.
- Young children should be supervised to ensure that they do not play with the portable lamp.
- Handle the luminaire and shade with care to avoid any damage or breakage.
- Select a suitable location away from liquids and hazards.
- To clean, wipe with a soft damp cloth. Do NOT soak or immerse the product in water or other liquids.
- Ensure that the luminaire does not come in contact with corrosive chemicals/solvents or abrasive cleaners etc.
Specifications
| SKU # | 271110 |
|---|---|
| Model # | FRTB168-1 |
| Colour | Black base + White shade |
| Rated Voltage | 220-240V~ 50Hz |
| Rated Wattage & Lamp Holder | 10W Max. E27 (LED globe only) |
| Weight | 1.1 kg |
| Dimensions | H:1150mm Dia:450mm |
v1.0 (11/2021)
Documents / Resources
|
Lucci decor 271110 Hiro 1 Light Floor Lantern with Handmade Paper
Shade
[pdf] Instruction Manual
271110 Hiro Lantern Floor Lamp, 271110 Hiro 1 Light Floor Lantern, 271110 Hiro
1 Light Floor Lantern with Handmade Paper Shade, Hiro 1 Light Floor Lantern
with Handmade Paper Shade, Hiro 1 Light Floor Lantern
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>