Hallman JK48A1 Bold Series 48 Inch Dual Fuel Range User Manual

Hallman JK48A1 Bold Series 48 Inch Dual Fuel Range

The Hallman Bold Series 48-inch Range (Model No: JK48A1) is a versatile cooking appliance that can operate on both Natural Gas and LP Gas. It features a powerful burner system and various BTU
sizes to meet your cooking needs. The range also includes an oven with multiple burners and additional features for enhanced cooking experience.

Product Information:

• Main Burner:
  • 1 @ 6,000 BTU/H (Front Left)
  • 1 @ 20,000 BTU/H (Front Middle Left)
  • 1 @ 6,000 BTU/H (Front Middle Right)
  • 1 @ 20,000 BTU/H (Front Right)
  • 1 @ 9,000 BTU/H (Back Left)
  • 1 @ 12,000 BTU/H (Back Middle Left)
  • 1 @ 9,000 BTU/H (Back Middle Right)
  • 1 @ 12,000 BTU/H (Back Right)
• Oven Burner:
  • 1 @ 22,000 BTU/H and 16,500 BTU/H
• Broil Burner:
  • 1 @ 10,000 BTU/H
• Total BTU: 132,500 BTU/H
• Oven: 120V, 60Hz, 5.0 Amp
• Oven Light: 120V, 60Hz, 0.2 Amp
• Ignitor: 120V, 60Hz, 3 Amp
• Oven Fan: 120V, 60Hz, 0.53 Amp
• NG (Natural Gas): Input Pressure: 7 inch, Output Pressure: 5 inch
• LP (LP Gas): Input Pressure: 11 inch, Output Pressure: 10 inch
• Made in China

Product Usage Instructions

1. Ensure the range is properly connected to a suitable gas supply.
2. Check the input pressure of the gas based on the type (NG or LP) and adjust if necessary.
3. To use the burners:
   • Turn the corresponding burner knob to the desired flame intensity.
   • For the main burners, there are different BTU sizes available for various cooking needs.
   • The broil burner is specifically designed for broiling food and has a fixed BTU rating.
4. To use the oven:
   • Set the desired temperature using the oven temperature control knob.
   • The oven burner provides two different BTU options for versatile cooking. Ensure the oven is properly preheated before placing food inside.
   • Use the oven light switch to illuminate the oven cavity if needed.
   • The oven fan helps to distribute heat evenly during cooking.
5. When finished cooking, turn off all burners and the oven, and close the gas supply valve.
6. Regularly clean and maintain the range as per the user manual instructions to ensure optimal performance and longevity.

SPECIFICATION

• Moderl No:JK48A1

• Type of Gas : Natural Gas/ LP Gas

• INPUT:

  • Main Burner:
  • 1 @ 6,000 BTU/H (F/L)
  • 1 @ 20,000 BTU/H (F/M/L)
  • 1 @ 6,000 BTU/H (F/M/R)
  • 1 @ 20,000 BTU/H (F/R)
  • 1 @ 9,000 BTU/H (B/L)
  • 1 @ 12,000 BTU/H (B/M/L)
  • 1 @ 9,000 BTU/H (B/M/R)
  • 1 @ 12,000 BTU/H (B/R)

• Oven Burner:
  1 @ 22, 000 BTU/H and 16,500BTU/H

• Broil Burner:
  1 @ 10, 000 BTU/H

• Total de BTU : 132 , 500 BTU/H

• Oven : 120V, 60Hz, 5,0 Amp

• Oven Light: 120V, 60Hz, 0.2 Amp.

• Ignitor ： 120V,60 Hz, 3Amp. XXXXXXX Oven Fan：120V, 60Hz, 0.53Amp.

• NG: Input Pressure: 7 inch, Output Pressure: 5 inch.

• LP: Input Pressure: 11inch, Output Pressure: 10 inch.

Conforms to ANSI STD Z21.1-2018 Certified to CSA STD 1.1-2018 Household Cooking Gas Appliances.

• Minimum distance from the sides of the range above the countertop to combustible sidewalls must be at least 13 inches.

• The minimum horizontal is 18inches between the appliance and combustible construction extending from the cooking surface.

• The minimum vertical clearance between the countertop surface and combustible construction above the appliance is 30inches.

• The minimum horizontal distance between overhead cabinets installed to either side of the appliance shall not be less than the nominal width of the appliance.

• A floor-supported unit is for zero between adjacent combustible construction.
  Do not store or use gasoline liquid propane clinder or other flammable vapors and liquids in the vicinity if this appliance.

• The gas applicance pressure regulator must be set for the gas which the appliance is used with Natural gas. Only the gas for the appliance is equiped shall be indentified.

• It is shipped from the factory adjusted for use with Natural Gas.

• You can find the orifices on the package with LP manual. Coversion orifices are located on the LP package.

• Please follow the instructions package with the orifices for gas conversion. Each orifice shall be clearly identified with regard to the gas for which it will be used, and the orifice size shall be indicated on the spud.
  Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>