HOOVER TE70-TE75011 Telios Plus Vacuum Cleaner User Manual
- June 12, 2024
- Hoover
Table of Contents
- HOOVER TE70-TE75011 Telios Plus Vacuum Cleaner
- Product Information
- INSTRUCTIONS FOR SAFE USE
- The Environment
- Product Usage Instructions
- GETTING TO KNOW YOUR CLEANER
- ASSEMBLING YOUR CLEANER
- USING YOUR CLEANER
- CLEANER MAINTENANCE
- ACCESSORIES AND NOZZLES
- USER CHECKLIST
- IMPORTANT INFORMATION
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HOOVER TE70-TE75011 Telios Plus Vacuum Cleaner
Product Information
This product is a vacuum cleaner designed for domestic cleaning. It comes with various features and accessories to assist in cleaning different surfaces.
- Main Body: The main body of the cleaner.
- On/Off Button: Used to turn the cleaner on and off.
- Cord Rewind Button: Used to wind the power cord back into the cleaner.
- *Variable Power Control:** Allows you to adjust the power of the cleaner (only available on certain models).
- Bag Check Indicator: Indicates when the dust bag needs to be checked and replaced.
- Bag Door Release Latch: Used to open the bag door for dust bag replacement.
- Pre-motor Filter: Filters out dust and debris before it reaches the motor.
- Exhaust Filter: Filters out dust and debris from the exhaust air.
- Accessories Door: Door for storing additional cleaning accessories.
- Hose Handle: Handle for controlling the hose attachment.
- *Suction Regulator:** Allows you to adjust the suction power of the cleaner (only available on certain models).
- Hose: Flexible hose attachment for reaching difficult areas.
- *Telescopic Tube:** Adjustable tube for extending reach (only available on certain models).
- Carpet and Floor Nozzle (GP):** Nozzle for cleaning carpets and floors.
- Carpet Nozzle (CA):** Nozzle specifically designed for carpet cleaning (only available on certain models).
- Hard Floor Nozzle (HF):** Nozzle specifically designed for hard floor cleaning (only available on certain models).
- Floor Type Selector: Allows you to select the appropriate floor type for optimal cleaning.
- Accessory Set: Set of additional cleaning accessories, including a crevice tool, furniture nozzle, and dusting brush.
- *Pet Hair Remover Mini Turbo Nozzle:** Nozzle specifically designed for removing pet hair (only available on certain models).
- *Allergy Remover Mini Turbo Nozzle:** Nozzle specifically designed for removing allergens (only available on certain models).
- *Grand Turbo Nozzle:** High-performance nozzle for efficient cleaning (only available on certain models).
- *Hard Floor Caresse Nozzle:** Nozzle specifically designed for gentle cleaning of hard floors (only available on certain models).
INSTRUCTIONS FOR SAFE USE
This appliance should only be used for domestic cleaning, as described in this user guide. Please ensure that this guide is fully understood before operating the appliance. Do not leave the appliance plugged in. Always switch off and remove the plug from the socket after use, or before cleaning the appliance or any maintenance task. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. If the power cord is damaged stop using the appliance immediately. To avoid a safety hazard, an authorised HOOVER service engineer must replace the power cord. Keep hands, feet, loose clothing and hair away from rotating brushes. Use only attachments, consumables or spares recommended or supplied by HOOVER. Static electricity: some carpets can cause a small build up of static electricity. Any static discharge is not hazardous to health. Do not use your appliance out of doors or on any wet surface or for wet pick up. Do not pick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar items. Do not spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours. Do not run over the power cord when using your appliance or remove the plug by pulling on the power cord. Do not continue to use your appliance if it appears faulty.
HOOVER service: To ensure the continued safe and efficient operation of this appliance we recommend that any servicing or repairs are only carried out by an authorised HOOVER service engineer. Do not stand on or wrap the cord around arms or legs when using your appliance. Do not use the appliance to clean animals or people. Do not position the appliance above you when cleaning the stairs.
The Environment
The symbol on this appliance indicates that this appliance may not be treated as household waste. Instead it must be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this appliance, please contact your local city office, your household and waste disposal service or the shop where you purchased the appliance.
Product Usage Instructions
- Remove all components from the packaging.
- Connect the hose to the cleaner main body, ensuring it clips and locks into position. To release the hose, press the two latches on the hose end and pull.
- Connect the handle to the upper end of the tube.
- Connect the lower end of the tube to the carpet and floor nozzle.
- To turn on the cleaner, press the On/Off Button.
- Adjust the power of the cleaner using the Variable Power Control (if available).
- Use the appropriate nozzle or accessory for the desired cleaning task.
- Move the cleaner over the surface to be cleaned, ensuring thorough coverage.
- To wind the power cord back into the cleaner, press the Cord Rewind Button.
- For temporary storage during use, park the tube in a suitable position. For long-term storage, place the tube in the storage position.
- To replace the dust bag, check if the Bag Check Indicator is illuminated. If so, follow these steps:
- Lift the bag door release latch to open the bag door.
- Close the bag to avoid dust escaping by pulling the tongue.
- Remove the full dust bag and dispose of it correctly and carefully.
Certain models only
Certain models only, nozzles may vary according to model
This appliance complies with the European Directives 2014/35/EU, 2014/30/EU and 2011/65/EU. CANDY HOOVER GROUP S.r.l. Via Privata Eden Fumagalli, 20861 Brugherio (MB) Italy
GETTING TO KNOW YOUR CLEANER
- A. Cleaner main body
- B. On/Off Button
- C. Cord Rewind Button
- D. Variable Power Control*
- E. Bag Check Indicator
- F. Bag Door Release Latch
- G. Bag Door
- H. Pre-motor Filter
- I. Exhaust Filter
- J. Exhaust Filter Cover
- K. Accessories door
- L. Hose Handle
- M. Suction Regulator*
- N. Hose
- O. Telescopic Tube*
- P. Telescopic Tube Adjuster*
- Q. Carpet and Floor nozzle (GP)**
- Q1. Carpet Nozzle (CA)**
- Q2. Hard Floor Nozzle (HF)**
- Q3. Carpet and Floor nOzzle(GP)**
- R. Floor type selector
- S. Accessory set
- S1. Crevice Tool
- S2. Furniture Nozzle
- S3. Dusting Brush
- T. Pet Hair Remover Mini Turbo Nozzle*
- U. Allergy Remover Mini Turbo Nozzle*
- V. Grand Turbo Nozzle*
- W. Hard Floor Caresse Nozzle*
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
- Connect the hose to the cleaner main body, ensuring it clips and locks into position. To release the hose: simply press the two latches on the hose end and pull. [2]
- Connect the handle to the upper tube end. [3]
- Connect the tube lower end to the carpet and floor nozzle**. [4]
USING YOUR CLEANER
- Extract Power Cord and plug it into the power supply. Do not pull the cord beyond the red marker. [5]
- Adjust the Telescopic Tube to the desired height by moving the Telescopic Tube Adjusters up and raise or lower the handle to the most comfortable cleaning position. [6]
- Carpet and Floor Nozzle**: Press the floor type selector pedal on the nozzle [7] to select the ideal cleaning mode for the floor type.
- Hard Floor – Brushes are lowered to protect the floor. Carpet – Brushes are raised for the deepest clean.
- Carpet & Floor Nozzle**: [8]
- Hard floor Cleaning: Press the pedal on the nozzle on Hard Floor mode and adjust the slider on the nozzle on ALL FLOORS. In this position brushes, wheels and wiper blade are lowered to protect hard floors. [8a]
- Standard Carpet & Rugs Cleaning: Press the pedal on the nozzle on Carpet mode and adjust the slider on the nozzle on ALL FLOORS. In this position brushes and wiper blade are raised while wheels are lowered to allow a perfect ease of movement on such surfaces. [8b]
- Deep Carpet Cleaning: Press the pedal on the nozzle on Carpet mode and adjust the slider on the nozzle on DEEP CARPET CLEANING. In this position brushes, wheels and wiper blade are raised for a deeper cleaning of your carpet. [8c]
- Switch the cleaner on by pressing the On/Off button on the cleaner main body. [9]
- Slide the Variable Power Control* to increase or decrease the suction. [10]
- Adjust the suction regulator* to the desired level. [11]
- Switch off at the end of use by pressing the On/Off button. Unplug and press the Cord Rewind Button to wind the power cord back into the cleaner. [12]
- Parking and Storage – The tube can be parked for temporary storage [13] while in use, or in the storage position when not in use. [14]
CLEANER MAINTENANCE
Replacing the Dust Bag
If the Bag Check Indicator is illuminated please check and if necessary,
replace the dust bag.
- Lift the bag door release latch [15] to open the bag door, close the bag to avoid dust escaping by pulling the tongue and remove the bag. [16] The full dust bag should be disposed of correctly and carefully.
- Fold a new bag as shown on the bag and fit by inserting the collar into the bag holder [17].
- Close the bag door.
Remember: The bag check indicator may be red if an obstruction has occurred. In this case, refer to ‘Removing a Blockage From the System’.
Cleaning the Filter
To maintain optimum performance of your cleaner, please wash the pre-motor filter and exhaust filter after each 5 bag changes.
Cleaning the pre-motor filter:
- Lift the Bag Door Release latch [15] to open the bag door and remove the bag. [16]
- To remove the pre-motor filter slide the pre-motor filter frame from the cleaner. [18]
- Remove the filter from the holder. [19]
- Wash it in hand warm water, [20] and allow it to dry thoroughly before replacing it in the cleaner.
Cleaning the exhaust filter:
- To remove the exhaust filter, unclip the exhaust filter cover [21] and remove the exhaust filter pack. [22]
- Wash the filter in hand warm water [20] and allow it to dry thoroughly before replacing in the cleaner.
Remember: Do not use hot water or detergents. In the unlikely event of the filters becoming damaged, fit a genuine Hoover replacement. Do not try and use the product without a dust bag or filter fitted.
*Cleaning the permanent cloth dust bag :**
To maintain optimum performance we recommend that you wash the permanent cloth
dust bag under hand warm water after every 5 full bags. Remove excess water
and leave to dry fully before replacing.
Removing a Blockage From The System
If the Bag Check Indicator is red:
- Check if the bag is full. If so refer to ‘Replacing The Dust Bag’.
- If is not full, then;
- Do the filters need cleaning? If so refer to ‘Cleaning the Filter’.
- Check if there is any other blockage in the system – Use a rod or a pole to remove any blockage from Telescopic Tube or flexible hose.
*Warning :** The bag check indicator will remain illuminated if the cleaner is used when the bag is full, if there is a blockage or if the filters are dirty. If used for a period over ten minutes with the bag check indicator illuminated, an electronic cut out will switch the cleaner off to prevent any risk of overheating. If this should happen, switch the cleaner off, unplug and correct the fault (see ‘Removing a blockage’). The cut out will automatically reset upon switching the cleaner back on.
ACCESSORIES AND NOZZLES
To obtain the best performance and efficiency it is recommended that the correct nozzles are used for the main cleaning operations. These nozzles are indicated in the diagrams by the letters GP, HF or CA.
- A nozzle type GP can be used to clean both carpet and hard floor.
- A nozzle type HF is suitable for use only on hard floor.
- A nozzle of type CA is suitable for use only on carpet.
- The other nozzles are accessories for specialist cleaning tasks and are recommended for occasional use only.
- The Crevice tool, Furniture nozzle and Dusting brush are stored on board under the accessories door.
- All accessories can be fitted to the end of the handle or the end of the Telescopic* Tube.
- Crevice Tool – For corners and hard to reach areas. [S1]
- Furniture Nozzle – For soft furniture and fabrics. [S2]
- Dusting Brush – For bookshelves, frames, keyboards, etc. [S3]
- Pet Hair Remover Turbo Nozzle* – Use the mini turbo nozzle on stairs or for deep cleaning on textile surfaces and other hard to clean areas. Particularly suitable for pet hair removal. [T]
- Allergen Remover Mini Turbo Nozzle* – Use the mini turbo nozzle on stairs or for deep cleaning on textile surfaces and other hard to clean areas. Particularly suitable for allergen removal. [U]
- Grand Turbo Nozzle – Use the Grand Turbo Nozzle for deep cleaning on carpets. [V] Hard Floor Caresse Nozzle – For parquet floors and other delicate floors. [W] IMPORTANT: Do not use the Grand Turbo Nozzle on rugs with long fringes, animal hides and carpet pile deeper than 15mm. Do not keep the nozzle stationary while the brush is rotating.
USER CHECKLIST
Should you have a problem with the product, complete this simple user checklist before calling your local Hoover service.
- Is there a working electricity supply to the cleaner? Please check with another electrical appliance.
- Is the dust bag over-filled? Please refer to ‘Cleaner Maintenance’.
- Is the filter blocked? Please refer to ‘Cleaner Maintenance’.
- Is the hose or nozzle blocked? Please refer to ‘Removing a blockage from the system’.
- Has the cleaner overheated? If so, it will take approximately 45 minutes for the cut out to automatically reset.
IMPORTANT INFORMATION
Hoover spares and Consumables
Always replace parts with genuine Hoover spares. These are available from your
local Hoover dealer or direct from Hoover. When ordering parts always quote
your model number.
Quality
Hoover’s factories have been independently assessed for quality. Our products
are made using a quality system which meets the requirements of ISO 9001.
Your Guarantee
The guarantee conditions for this appliance are as defined by our
representative in the country in which it is sold. Details regarding these
conditions can be obtained from the dealer from whom the appliance was
purchased. The bill of sale or receipt must be produced when making any claim
under the terms of this guarantee.
Subject to change without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>