VIKING SAFE VS-15FL Floor Safe with Key and LED Light Owner’s Manual
- June 12, 2024
- VIKING SAFE
Table of Contents
VIKING SAFE VS-15FL Floor Safe with Key and LED Light
Product Information
Model: VS-15FL Floor Safe with Key and LED Light
Website: www.vikingsecuritysafe.com
Email: [email protected]
Description: The Floor Viking Security Safe is designed to provide hidden yet secure access to your valuables and firearms. It features a time-tested key lock mechanism and includesan LED light for added convenience.
Product Usage Instructions
1. Opening Your Safe
- Insert the key and turn it right (clockwise) to unlock the safe.
- Use the key to lift the lid open.
- When not in use, hide the keys in a secure location outside of the safe.
2. How to Install/Change Batteries on the LED Light
- Unscrew the little screw.
- Carefully pull out the screw side first and move the LED light out of its nest.
- Install fresh batteries and the light will turn on.
- Gently push the leverage down to switch the light off.
- Put back the LED light in its nest starting with the leverage side first.
3. Mounting Your Safe
- Each safe has pre-drilled mounting holes.
- Decide where you want your safe to stay permanently.
- Open the safe, remove the LED light to access the pre-drilled holes and locate the mounting holes.
- Mark the hole locations, pre-drill holes, and secure your safe with the provided screws.
Warranty: Register your safe online to activate the Viking 2-year manufacturer’s warranty. Visit www.VikingSecuritySafe.com to register.
Disclaimer: Neither the seller nor the manufacturer shall be liable for any injury, loss, or damage arising out of the use of, or the inability to use the vault. The user is responsible for determining the suitability of the safe before use and assumes all risks and liabilities associated with its use.
Warnings:
- It is not recommended to keep a loaded gun in this or any other safe.
- Keep the key in a secure location and do not store it inside the safe.
For additional product information, FAQs, and troubleshooting, visit www.vikingsecuritysafe.com or contact [email protected].
GENERAL DESCRIPTION
Thank you for purchasing your Floor Viking Security Safe. We do our best to
keep you safe.
Your Floor safe has been designed to offer you hidden yet secure access to
your valuables and firearms. This safe is most basic time tested key safe, you
don’t even need a Manual. Just in case, here is one.
OPENING YOUR SAFE
- Insert the key and Turn Right (Clockwise) to unlock your safe. Use the key to lift the lid open.
- When not in use, hide the keys in a secure location (OUTSIDE of the safe).
HOW TO INSTALL
HOW TO INSTALL/CHANGE BATTERIES ON THE LED LIGHT
- Unscrew the little screw. Carefully pull out the screw side first and move the LED light out of its nest.
- Install fresh batteries and the Light will Turn On.
- Gently push the Leverage down to switch the Light OFF.
- Put back the LED light in its nest starting with the Leverage side first.
MOUNTING YOUR SAFE
- Each safe has been pre-drilled with mounting holes.
- Once you decide where you want your safe to stay permanently, open your safe, remove the LED light to access the pre-drilled holes and locate the mounting holes.
- Mark the hole locations, pre-drill holes, and secure your safe with provided screws.
WARRANTY
Register your safe to activate Viking 2-year manufacturer’s warranty. To register online, visit: www.VikingSecuritySafe.com
WARNING
It is never recommended that a loaded gun be kept in this or any other safe.
DISCLAIMER
Neither seller nor manufacturer shall be liable for any injury, loss, or
damage, direct or consequential, arising out of the use of, or the inability
to use the vault.
The user shall determine the suitability of the safe before the intended use
and user assumes all risk and liability whatsoever in connection therewith.
WARNING
Keep the key in a secure location. DO NOT store the key of this safe in the same safe.
For additional product information, FAQ’s and troubleshooting, visit:
www.vikingsecuritysafe.com | [email protected]