SWIPESENSE 221.0 Asset Tag User Manual

SWIPESENSE 221.0 Asset Tag

SwipeSense Asset Tag
The SwipeSense Asset Tag is a small device designed to track assets within a facility. It is manufactured by SwipeSense, Inc., located at 4424 N Ravenswood Ave. Chicago, IL. 60640. You can contact them at 847-440-6215.

Product Information

• Model: 221.0
• Page: 1 of 4
• Date: June 2023

Safety and Regulatory Information
This device complies with part 15 of the FCC Rules. It operates under the following conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.

Warning: Any changes or modifications not approved by the responsible party may void the user’s authority to operate the equipment.

RF Exposure: This equipment meets FCC RF Exposure requirements and should be installed and operated with a minimum distance of 20cm between the radiator and any part of the human body.

Warnings:

• This device is for indoor use only.
• This device should only be installed by trained SwipeSense personnel.
• Do not open the device as there are no user-serviceable parts inside, and it is powered at all times.
• Do not use if the case is cracked or worn.

Caution: Any changes or modifications not approved by the responsible party may void the user’s authority to operate the equipment.

System Description
The SwipeSense System combines point-of-care hand hygiene with real-time usage data to improve compliance with infection control procedures. The system includes:

• Badges worn by individual employees
• Asset tags attached to tracked assets
• Hygiene sensors mounted on hygiene dispensers to track employee hand sanitation frequency
• Entry sensors installed indoor thresholds to provide real-time feedback
• Location hubs that monitor employee presence in patient rooms and asset locations
• A communication hub located on each unit that collects and transmits data to the cloud

Once the data is uploaded to the cloud, it is accessible to all administrators.

Product Description
The SwipeSense Asset Tag is a small device that should be attached to any asset that needs to be tracked. It transmits signals to the Location Hubs, allowing them to establish the asset’s location. See Figure 1 below for an example of the SwipeSense Asset Tag attached to a Phillips Intellivue MX40.

Safety and Regulatory Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions. (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device must not be co-located with other transmitters.

RF Exposure
This equipment complies with FCC RF Exposure requirements and should be installed and operated with a minimum distance of 20cm between the radiator and any part of the human bod y.

Warnings

• This Device is for indoor use only.
• This Device is only to be installed by trained SwipeSense personnel.
• Do not open the Device as there are no user-serviceable parts inside and this product is powered at all times.
• Do not use if the case is cracked or worn.

Caution
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

System Description
The SwipeSense System combines point-of-care hand hygiene with real-time usage data to eliminate dependency on manual observations and increase compliance with infection control procedures.
Our fully integrated system seamlessly provides real-time hand hygiene data from across the enterprise with exceptional clarity. The SwipeSense System creates a “mesh network” that provides flexibility for compiling and communicating the hygiene practices of employees within your facility. The mesh network is comprised of:

• Badges are worn on individual employees
• Asset tags attached to assets that should be tracked
• Hygiene sensors mounted to hygiene dispensers track employee hand sanitation frequency
• Entry sensors installed indoor thresholds to provide real-time feedback
• Location hubs monitor employee presence in patient rooms and asset locations
• The communication hub located on each unit collects the data generated within the network and transmits it to the cloud.

Once the data is uploaded to the cloud, it is accessible to all administrators.

Product Description
This is a small device that should be attached to any asset that needs to be tracked. This device transmits signals to the Location Hubs allowing them to establish their location. A picture of the SwipeSense Asset Tag attached to a Phillips Intellivue MX40 as an example is provided in Figure 1.

Installation Procedure

1. If the Asset Tag is not pre-assigned to a specific asset, assign the Device ID in the App associating the Asset Tag with the asset.
2. Attach the Asset Tag to the asset that needs to be tracked using zip ties, or some other non-permanent method of attachment.

SwipeSense, Inc.
4424 N Ravenswood Ave. Chicago, IL. 60640 847-440-6215

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>