BLACK DECKER BXMF75E Mist Fan Instruction Manual

: June 12, 2024
: Black Decker

Table of Contents

BLACK DECKER BXMF75E Mist Fan
Product Information
Product Usage Instructions:
SAFETY ADVICE AND WARNINGS
DESCRIPTION
INSTALLATION
INSTRUCTIONS FOR USE
CLEANING
ANOMALIES AND REPAIR
SPECIFICATION
WARRANTY AND TECHNICAL ASSISTANCE
CONTACT LIST
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BLACK DECKER BXMF75E Mist Fan

BLACK-DECKER-BXMF75E-Mist-Fan-FIG-1

Product Information

Product Name: MIST FAN BXMF75E
Brand: BLACK + DECKER
Model: BXMF75E
Website: www.blackanddecker.eu
Languages: BG, RO, RU, EL, PL, NL, PT, ES, IT, DE, FR, EN

Product Usage Instructions:

Before using this appliance, please read the safety advice and warnings below:

This appliance can be used by children aged 8 years and above and individuals with reduced physical, sensory, or mental capabilities if they have been given proper supervision or instruction.
Cleaning and user maintenance should not be performed by children unless supervised.
This appliance is not a toy and children should be supervised to prevent them from playing with it.
If the supply cord is damaged, it must be replaced by the manufacturer or qualified personnel to avoid hazards.
Ensure the fan is switched off from the mains before starting any installation or assembly operation.
Disconnect the appliance from the mains when not in use and before cleaning, maintenance, or filling tasks.
Switch off the fan from the mains before removing the guard.
This appliance is designed for household use only and should not be used for professional or industrial purposes.
High humidity levels may encourage the growth of biological organisms. Avoid dampness around the humidifier and do not allow absorbent materials to become damp.
Unplug the appliance during filling and cleaning.
Never leave water in the reservoir when the appliance is not in use. Empty and clean the humidifier before storage and before the next use.
Micro-organisms present in the water or environment can grow in the water reservoir, causing health risks. Renew the water and clean the tank every 3 days.
Before refilling, clean the tank and other parts in contact with standing water using fresh tap water and a few drops of cleaning detergent. Remove any scale, deposits, or film from the tank and wipe all surfaces dry.
Ensure the voltage indicated on the rating label matches the mains voltage before plugging in the appliance.

Dear customer,
Many thanks for choosing to purchase a BLACK + DECK-ER brand product.
Thanks to its technology, design and operation and the fact that it exceeds the strictest quality standards, a fully satisfactory use and long product life can be assured.

SAFETY ADVICE AND WARNINGS

Read these instructions carefully be-fore using this appliance and keep them for future reference. Failure to follow and observe these instruc-tions could lead to an accident.
This appliance can be used by chil-dren aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and under-stand the hazards involved.
Cleaning and user maintenance shall not be made by children unless they are supervised.
This appliance is not a toy. Children should be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufac-turer, its service agent or similarly
Ensure that the fan is switched off from the supply mains before start any installation or assembly opera-tion.
Disconnect the appliance from the mains when not in use and before undertaking any cleaning, mainte-nance or filling task.
Ensure that the fan is switched off from the supply mains before removing the guard.
This appliance is for household use only, not professional, industrial use.
Be aware that high humidity levels may encourage the growth of biolog-ical organisms in the environment.
Do not permit the area around
the humidifier to become damp or wet. If dampness occurs, turn the output of the humidifier down. If the humidifier output volume cannot be turned down, use the humidifier intermittently. Do not allow absor-bent materials, such as carpeting, curtains, drapes, or tablecloths, to become damp.
Unplug the appliance during filling and cleaning
Never leave water in the reservoir when the appliance is not in use.
Empty and clean the humidifier before storage. Clean the humidifier before next use.
WARNING: Micro-organisms that may be present in the water or in the environment where the appliance is used or stored, can grow in the water reservoir and be blown in the air causing very serious health risks when the water is not renewed and the tank is not cleaned properly every 3 days.
Empty the tank and refill every third day. Before refilling, clean the tank and other parts of the appliance in contact with standing water with fresh tap water and a few drops of cleaning detergent. Remove any scale, deposits, or film that has formed on the sides of the tank or on interior surfaces, and wipe all surfaces dry.
Ensure that the voltage indicated on the rating label matches the mains voltage before plugging in the appliance.
Connect the appliance to a socket that can supply a minimum of 10 amperes.
The appliance’s plug must fit into the mains socket prop-erly. Do not alter the plug. Do not use plug adaptors.
The appliance must be used and placed on a flat, stable surface.
Ensure that neither the air access nor exit become either totally or partially covered by drapery, clothing, etc., as this increases the risk of fire.
Do not use the appliance in association with a program-mer, timer or other device that automatically switches it on.
Do not use the appliance if the cable or plug is damaged.
If the product enclosure breaks, immediately disconnect the appliance from the mains to prevent the possibility of an electric shock.
Do not use the appliance if it has fallen on the floor, if there are visible signs of damage or if it has a leak.
Do not pull the supply cord. Never use the supply cord to lift up, carry or unplug the appliance.
Do not wrap the supply cord around the appliance.
Check the state of the supply cord. Damaged or tangled cables increase the risk of electric shock.
The appliance is not suitable for outdoor use.
Supply cord should be regularly examined for signs of damage, and if the cord is damaged, the appliance must not be used.
Do not use or store the appliance outdoors.
Do not touch the plug with wet hands.
Do not touch any of the appliance’s moving parts while it is operating.
The temperature of the accessible surfaces may be high when the appliance is in use.

Use and care:

Fully extend the appliance’s supply cord before each use.
Do not use the appliance if its accessories are not properly fitted.
Do not use the appliance if the accessories attached to it are defective. Replace them immediately.
Do not use the appliance if the on/off switch does not work.
Do not move the appliance while in use.
Do not use the appliance if it is tipped up and do not turn it over.
Do not turn the appliance over while it is in use or connected to the mains.
Remove the batteries from the remote control if you are not going to use it for some time.
Store this appliance out of reach of children and/or persons with physical, sensory or reduced mental or lack of experience and knowledge.
Keep the appliance in a dry, dust-free place, out of direct sunlight.
Make sure that dust, dirt or other foreign objects do not block the fan grill on the appliance.
Keep the appliance in good condition. Check that the moving parts are not misaligned or jammed and make sure there are no broken parts or anomalies that may prevent the appliance from operating correctly.
Never leave the appliance connected and unattended if is not in use. This saves energy and prolongs the life of the appliance.

Service:

Make sure that the appliance is serviced only by special-ist personnel, and that only original spare parts or acces-sories are used to replace existing parts/accessories.
Do not attempt to disassemble or repair the appliance by yourself in order to avoid a hazard.
CAUTION: There is a risk of fire if the appliance’s clean-ing is not done according to these instructions.
Any misuse or failure to follow the instructions for use renders the guarantee and the manufacturer’s liability null and void.

DESCRIPTION

BLACK-DECKER-BXMF75E-Mist-Fan-FIG-2

Guard bracket
Mist Vent
Front fan guard
Blade bracket
Fan blade propeller
Guard bracket
Rear fan guard
Fan head/motor
Flexible Mist hose
Fixing screw
Housing
Pedestal heavy round base
4 castors
Floor bracket
Water tank cover

BLACK-DECKER-BXMF75E-Mist-Fan-FIG-4

A Timer display (hours)
B“Sleep” wind mode display
C“Natural” wind mode display
D“Medium” wind speed 2 display
E“Light” wind speed 1 display
F“Light” Mist volume 1 display
G“Normal”wind mode display
H Oscillation display
I “Strong” wind speed 3 display
J Timer indicator light
K “Medium” Mist volume 2 display
L “Strong” Mist volume 3 display
M Mist volume settings
O Power ON/OFF
P Wind mode settings
Q Fan Speed settings
R Oscillation ON/OFF
S Timer ON/Timer OFF settings
1.1 Mist ON / OFF & Mist volume settings
1.2 Wind Speed settings
1.3 Timer ON /OFF, 1-12 hours
1.4 Wind Mode Settings
1.5 Fan ON / OFF
1.6 Oscillation ON/OFF

INSTALLATION

Be sure to remove all packaging material from inside the appliance.
Ensure that the fan is switched off and unplugged from the supply mains before to start any installation or assembly operation.
Do not remove the support feet or wheels from the appliance.
Ensure that the appliance is level with respect to the floor.
Do not cover or obstruct any of the openings of the appliance.
The plug must be easily accessible so it can be disconnected in an emergency.
The appliance should be used with its base fitted.
The appliance should be used with its wheels attached.

Instructions for replacing the remote con-trol battery (FIg 3)

Non-rechargeable batteries should not be recharged.
Rechargeable batteries should be removed from the product before charging.
Different types of batteries and new and used batteries should not be mixed.
Batteries are to be inserted with the correct polarity
Exhausted batteries should be removed and safely disposed of.
If the appliance is to be stored unused for a long period then batteries should be removed.
The supply terminals should not be short-circuited.
Open the battery cover of the remote control, take two AAA 1.5V batteries and put them in (the end with the spring in the remote control is the negative pole). The positive and negative poles of the battery should be installed corresponding to the positive and negative poles of the remote control.

Assembling the base:

To fix the base into the appliance, place the appliance face down.
Fit the base on the main body of the appliance.
Fix the base using the floor bracket
Stand the appliance up again so as to check that the base works properly.

Assembling the castors:

To assemble the castors, place the appliance face down
Insert the 4 castors (13) in the four holes
Stand the appliance up again so as to check that the castors work properly.

Assembling the grill and the propeller (FIG 1 &2):

A) remove the fan blade bracket (4) and the guard brack-et (6) on the fan head,
B) align the rear fan guard (7) to the card position and install it, tighten the guard bracket (6) clockwise, and fix the rear fan guard,
C) Install the fan blade propeller (5) against the motor shaft, pay attention to the motor shaft pin should be aligned with the slot on the fan blade, and tighten the fan blade bracket (4) on the motor shaft counterclockwise.
D) install the guard bracket (1) on the rear fan guard (7), and then install the front fan guard (3) (the mist vent (2) on the front fan guard faces down), it is best to tighten the fan guard screws **

** BLACK-DECKER-BXMF75E-Mist-Fan-FIG-5

INSTRUCTIONS FOR USE

Before use:

Make sure that all products’ packaging has been removed.
Prepare the appliance according to the function you wish to use:

Use:

CAUTION: Care should be taken to avoid spillage when moving the appliance.
Extend the cable completely before plugging it in.
Connect the appliance to the mains.
Guide the appliance to direct the flow of air in the desired direction.
Turn the appliance on, by using the on/off button.
Select the appliance function desired.
Select the desired power.
Select the desired speed.

Fan function:

Select the fan function.
Select the desired fan speed. Timer function:
The appliance’s operating time can be controlled.
To program the operating time simply select it using the (S) or (1.3) buttons.
You can select between 1 and 12 hours
If you press the “Timer” button when the fan is on, the display will then show the time remaining
The time programmed or remaining time will appear on the display (A).
After the selected time the appliance will switch off automatically.

Oscillation function:

The oscillation function makes it possible to direct the flow from the apparatus so that it automatically alternates over a range of 75º.
To activate this function, press the oscillation on/off button (R) or (1.6).
To deactivate this function, press the oscillation on / off button (R ) or (1.6) again.
MODES
Press the “Wind Mode” (P) or (1.4) button to set the wind mode (normal, sleep, natural).
The Normal Mode is set by default when the unit is first turned on
The Natural mode creates variable wind patterns so as to simulate the variable winds
that you would experience outdoors
The Sleep mode creates wind patterns that are the same as the Natural Mode wind.
patterns. However, when the fan is set to either Medium or High Speed, the pattern will drop a speed level after approximately 30 minutes.
Cooling using ultrasonic mist.
Press the “M” settings button to switch the ultrasonic mist on, and you can select the mist volume (low, middle and high) by pressing the button several times.

Once you have finished using the appliance:

Turn the appliance off, using the on/off switch (O).
Unplug the appliance from the mains.
Put the cable back in the cable housing.
Clean the appliance.

How to Drain Excess Water

Caution: care should be taken when draining excess water to avoid unnecessary spillage. Always drain the excess water in a space where water damage to surrounding areas is not possible.
When removing the water tank, excess water remains in the appliance. To drain this excess water please follow the below steps.
Place a suitable receptacle on the floor in which to drain the excess water.
The drain is located at the join of the base and main body of the appliance.
Lift the appliance and gently tip forwards over the receptacle to an angle of 60-80 degrees to allow the water to drain.
Dispose of the excess water.

Water tank filling (FIG.4)

Remove the water tank. (Figure 4.1)
Unscrew the black cap on the underside. (Figure 4.2)
Fill with water and screw the cap back on. (Figure 4.3)

CLEANING

Disconnect the appliance from the mains and allow it to cool before undertaking any cleaning task.
Remove any scale, deposits, or film that has formed on the sides of the tank or on interior surfaces, and wipe all surfaces dry.
Do not let water or any other liquid get into the air vents to avoid damage to the inner parts of the appliance.
Never submerge the appliance in water or any other liquid or place it under running water.
If the appliance is not in good condition of cleanliness, its surface may degrade and inexorably affect the duration of the appliance’s useful life and could become unsafe to use.

ANOMALIES AND REPAIR

Take the appliance to an authorised technical support service if product is damaged or other problems arise. Do not attempt to disassemble or repair the appliance yourself as this may be dangerous.

For EU product versions and/or in case that it is requested in your country: Ecology and recyclability of the product

The materials of which the packaging of this appliance consists are included in a collection, classification and recycling system. Should you wish to dispose of them, use the appropriate public recycling bins for each type of material.
The product does not contain concentrations of substances that could be considered harmful to the environment.
- This symbol means that in case you wish to dispose of the product once its working life has ended; take it to an authorised waste agent for the selective collection of Waste from Electric and Electronic Equipment (WEEE).
- This symbol means that product may include a battery or batteries; user must to remove them before disposing of the product. Remember that batteries must be disposed of in duly authorised containers. Do not dispose of them in fire.
- The following information details the features related to ecodesign:
  (EU) No 206/2012 + (EU) 2016-2282.

SPECIFICATION

BXMF75E

This appliance complies with Directive 2014/35/EU on Low Voltage, Directive 2014/30/EU on Electromagnetic Compatibility, Directive 2011/65/EU on the restrictions of the use of certain hazardous substances in electrical and electronic equipment and Directive 2009/125/EC on the ecodesign requirements for energy-related products.

WARRANTY AND TECHNICAL ASSISTANCE

This product enjoys the recognition and protection of the legal guarantee in accordance with current legislation. To enforce your rights or interests you must go to any of our official technical assistance services.
You can find the closest one by accessing the following web link: http://www.2helpu.com/.
You can also request related information, by contacting us (see the last page of the manual).
You can download this instruction manual and its updates at http://www.2helpu.com/.

CONTACT LIST

België/Belgique| Stanley Black & Decker Belgium BVBA Egide Walschaertsstraat 16

2800 Mechelen

| www.blackanddecker.be enduser [email protected] Tel – NL. +32 15 47 37 65

Tel – FR. +32 15 47 37 66

---|---|---
Bulgaria| Stanley Black&Decker Polska Bucharest Branch Phoenicia Business Center

Turturelelor Street, No 11A, 6th Floor,Module 15, 3rd District. Bucharest (Romania)

| [email protected] Tel. +4021.320.61.04.
Česká Republika| Stanley Black & Decker Czech Republic s.r.o. Chodov Türkova 2319/5b

149 00 Praha 4

Česká Republika

| www.blackanddecker.cz [email protected] Tel: 261 009 782
Danmark| Stanley Black & Decker Denmark Roskildevej 22

2620 Albertslund

| www.blackanddecker.dk [email protected] Tel. 70 20 15 10

Fax. 70 22 49 10

Deutschland| Stanley Black & Decker Deutschland GmbH Black & Decker Str. 40, D – 65510 Idstein| www.blackanddecker.de [email protected] Tel. 06126 21-0

Fax 06126 21-2980

Ελλάδα| Black & Decker ΕΛΛΑΣ

EΔΡΑ-ΓΡΑΦΕΙΑ : Στράβωνος 7 & Λ. Βουλιαγμένης. 166 74 Гλυφάδα – Αθήνα

SERVICE : Ημερος Τόπος 2 (Χάνι Αδάμ) – 193 00 Ασπρόπυργος

| www.blackanddecker.gr [email protected] Τηλ: 00302108981616

Φαξ: 00302108983570

España| Engineering and Technology for Life Spain Avenida Barcelona s/n

25790 Oliana (Lleida)

| www.blackanddecker.es [email protected]
France| Engineering and Technology for Life France 6 rue de l’Industrie

Z.I des Sablons

89100 Sens

| www.blackanddecker.fr [email protected]
Helvetia| ROFO AG

Gewerbezone Seeblick 3213 Kleinbösingen

| www.blackanddecker.ch [email protected]

Tel. 026 674 93 93

Fax 026 674 93 94

Hungary| Stanley Black & Decker Hungary Kft. Meszaros u. 58/B

1016 Budapest (Hungary)

| www.blackanddecker.hu Tel: 1.6 225-1661 / 62
Italia| Stanley Black & Decker Italia

Via Energypark 6 c/o Energypark Building 3 sud 20871 Vimercate (MB)

| www.blackanddecker.it [email protected] Tel. 800-213935

Fax 039-9590313

Nederland| Stanley Black & Decker Netherlands BV Holtum Noordweg 35

6121 RE BORN

Postbus 83. 6120 AB BORN

| www.blackanddecker.nl enduser [email protected] Tel. +31 164 283 065

Fax +31 164 283 200

Norge| Stanley Black & Decker Norway AS Gullhaugveien 11, 0484 Oslo

PB 4613, Nydalen, 0405 Oslo

| www.blackanddecker.no [email protected] Tlf. 22 90 99 10

Fax 45 25 08 00

Österreich| Stanley Black & Decker Austria GmbH Oberlaaerstraße 248, A-1230 Wien| www.blackanddecker.at [email protected] Tel. 01 66116-0

Fax 01 66116-614

---|---|---
Polska| Stanley Black & Decker Polska SP.z.o.o ul. Postepu 21D

02-676 Warszawa Polska

| www.blackanddecker.pl [email protected] Tel: 22 4642700
Portugal| Engineering and Technology for Life Portugal Avenida Rainha D. Amélia, nº12-B

1600-677 Lisboa

| www.blackanddecker.pt [email protected]
Romania| Stanley Black&Decker Polska Bucharest Branch Phoenicia Business Center

Turturelelor Street, No 11A, 6th Floor,Module 15, 3rd District. Bucharest (Romania)

| [email protected] Tel. +4021.320.61.04.
Slovenija| G-M&M, proizvodnja in marketing, d.o.o. Brvace 11

1290 Grosuplje (Slovenija)

| G-M&M, proizvodnja in marketing, d.o.o. Brvace 11

1290 Grosuplje (Slovenija)

Suomi| Stanley Black & Decker Finland Oy Kumpulantie 13B, 00520 Helsinki PL 47, 00521 Helsinki| www.blackanddecker.fi [email protected] Puh. 010 400 43 33

Faksi 0800 411 340

Sverige| Stanley Black & Decker Sweden AB Flöjelbergsgatan 1c, 431 35 Mölndal

Box 94, 431 22 Mölndal

| www.blackanddecker.se [email protected] Tel. 031-68 60 60

Fax 031-68 60 80

United Kingdom & Republic Of Ireland| “Black & Decker

Slough, Berkshire SL1 3YD 210 Bath Road “

| www.blackanddecker.co.uk [email protected] Tel. 01753 511234