velleman VM152 LED Dimmer with RF Remote Control User Manual
- June 12, 2024
- Velleman
Table of Contents
**velleman VM152 LED Dimmer with RF Remote Control User Manual
**
ASSEMBLY INSTRUCTION
Description
- 12 – 24V DC input
- LED/LAMP connection (6A max.)
- Dim Down
- Dim up
- Antenna
- Dim level indicator
- Dim up
- Dim down
- Indication
Velleman hereby certifies that the device
VM152 meets the essential requirements and all
other relevant stipulations of
directive ETS 300-220
For the complete conformity declaration
check out :
http://www.velleman.be/downloads/doc/ce_VM152.pdf
Do not mount the unit in the proximity of other electronic devices or metal objects. Straighten the antenna !
Specifications and features
SPECIFICATIONS
Receiver:
- power supply: 12-24VDC
- max load: 6A
- LED PWM frequency: +/- 300Hz
Transmitter:
- 433.92 MHz operation
- R&TTE compliant ( ETS 300-220)
FEATURES
- ideal for use with LED strips see our website
- suited for incandescent lamps
- automated Slow on / slow off effect mode selectable
- learn up to 16 remotes
- Hi power MOSFET output
- memory for last selected function
- on-board operation is possible
Mounting
WARRANTY
This product is guaranteed against defects in components and construction from the moment it is purchased and for a period of TWO YEAR starting from the date of sale. This guarantee is only valid if the unit is submitted together with the original purchase invoice. VELLEMAN components Ltd limits its responsibility to the reparation of defects or, as VELLEMAN components Ltd deems necessary, to the replacement or reparation of defective components. Costs and risks connected to the transport, removal or placement of the product, or any other costs directly or indirectly connected to the repair, will not be reimbursed by VELLEMAN components Ltd. VELLEMAN components Ltd will not be held responsible for any damages caused by the malfunctioning of a unit.
Operation
For led dimming there are 2 possibilities, you can control directly on the receiver or with the remote.
CONTROLLING ON THE RECEIVER :
| Dim down | Dim up | Automated slow on/off | Erase all remotes |
|---|---|---|---|
| Press button 3 | Press button 4 | keep button 4 pressed en press button 3 | |
| briefly. | Power off. Press button 3 & 4 while powering on. Led’s will blink to |
confirm, when LED’s are extinct release button 3 & 4.
CONTROLLING WITH REMOTE CONTROL :
| Dim down | Dim up | Automated slow on/ | Cancelling automated slow on/off |
|---|---|---|---|
| Press button 8 | Press button 7 | keep for a second button 8 & 7 pressed. | keep |
button 8 pressed until LED’s are extinct.
LEARN A REMOTE :
Keep button 3 & 4 pressed, the led blinks for a few seconds. Pres button 7 of
the remote to learn, keep at the same time button 3 & 4 pressed! The led’s
blinks to confirm that the remote has been stored. At full memory led keeps
blinking.
Transmitter
Changing the code
- Hold SW1 (left button)
- Briefly press the ‘program’-button (SW3) 3 times. The LED will flash 3 times.
- Release SW1.
- Your unique 32-bit code has been generated and stored
Return to the default code
- Hold SW1 (left button).
- Hold the ‘program’-button (SW3). After +/- 10s the led will flash 5 times.
- Release both buttons.
- Your code has been reset to the default code.
Receiver: remove all learned remotes from memory and return to default
code
- Turn off the power (disconnect power supply)
- Hold buttons 3 & 4 pressed
- Turn on power (connect power supply)
- The Led’s start flashing
- Release buttons 3 & 4 after the LED’s turn off
This process takes about 10 seconds.
If the button is released before the LED’s turn off, the memory will not be cleared.
The unit will now respond to the default code only. please also reset the transmitter to the default code.
SAFETY INSTRUCTIONS
- All repairs should be executed by qualified technicians.
- Avoid the installation of the module in locations with standing or running water or excessive humidity. Indoor use only !
- Handle the module gently and carefully. Dropping it can damage the circuit board.
- Never exceed the protection limit values indicated in the specifications.
- As safety requirement vary, please check with your local authorities.
- Facilitate the operation of the device by familiarising yourself with its adjustments and indications.
- Velleman modules are not suitable for use or as part of life support systems, or systems that might create hazardous situations of kind.
Costumer Support
Modifications and typographical errors reserved
– © Velleman nv – HVM152G – 2012 – ED1 (rev.2)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>