NINJA NF700C Professional XL Food Processor User Guide

NINJA NF700C Professional XL Food Processor

Product Information

• The Intelligent preset programs of this food processor combine unique blending and pausing patterns to automate the blending process.
• Auto-iQ programs start immediately and automatically stop when processing is complete.
• The food processor comes with different blade assemblies including the Chopping Blade Assembly, Dough Blade Assembly, and Reversible Slicing/Shredding Disc.
• The 3-part food pusher separates into small, medium, and large food pushers to guide ingredients through different-sized feed chute openings.
• The unit has a safety feature where the large food pusher must be inserted in the feed chute for the unit to run.
• There are Manual Programs available including LOW and HIGH speeds that run continuously for 60 seconds, and PULSE for greater control of pulsing and processing.
• The food processor is not intended to crush ice and there are warnings regarding this in the Safety Instructions.
• The product also includes a storage box (not included with all models) for convenient storage of disc assemblies, disc spindle, and dough blade assembly.

Product Usage Instructions

1. Place the Precision Processor Bowl on the base and turn it clockwise to lock it in place.
2. Select the desired blade assembly based on the intended use:
   • For chopping, use the Chopping Blade Assembly. Run the program once for a large chop, twice for a small chop, and three times for a mince.
   • For dough preparation, use the Dough Blade Assembly. This is ideal for creating dough for pies, pizzas, and cookies.
   • For pureeing, use the chopping blade assembly or nesting work bowl with small chopping blade assembly. This is perfect for making silky-smooth sauces and hummus.
   • For slicing and shredding, use the reversible slicing/shredding disc. Face the side labeled SLICER up for slicing and face the side labeled SHREDDER up for shredding.
3. Ensure that the large food pusher is inserted in the feed chute for the unit to run. Do not exceed the CHUTE MAX FILL line on the large feed chute.
4. For Manual Programs, select either LOW or HIGH speed for continuous blending for 60 seconds. Use PULSE for greater control of pulsing and processing.
5. Important: Do not run the unit on HIGH if using the dough blade or disc assemblies. Also, do not use the food processor to crush ice.
6. After using the dough program, you can use PULSE to add mix-ins like chocolate chips or raisins.
7. For storage, use the provided storage box (if included) to safely store the disc assemblies, disc spindle, and dough blade assembly.

Please make sure to read the enclosed Ninja® Safety Instructions prior to using your unit.

GET TO KNOW THE ATTACHMENTS

BLADE ASSEMBLIES

• CHOPPING BLADE ASSEMBLY

• DOUGH BLADE ASSEMBLY

3-PART FOOD PUSHER

The 3-part food pusher separates into small, medium, and large food pushers to guide ingredients through the different-sized feed chute openings. Use the small feed chute opening (which also doubles as a measuring cup) for ingredients like carrots, the medium feed chute for ingredients like cucumbers and zucchini, and the large feed chute for ingredients like potatoes.

NOTE: As a safety feature, the large food pusher must be inserted in the feed chute for the unit to run. DO NOT exceed the CHUTE MAX FILL line on the large feed chute. Unit will not run if ingredients exceed this line.

DISC ASSEMBLIES

REVERSIBLE SLICING/ SHREDDING

• The reversible slicing/shredding disc is perfect for outputs like thinly sliced cucumbers and shredded carrots.
• Face the side labeled SLICER up for slicing and face the side labeled SHREDDER up for shredding.

DISC SPINDLE

• Install disc spindle onto the gear shaft of the Precision Processor® Bowl to use the disc assemblies.

STORAGE BOX: (not included with all models)

• Easily and safely store the disc assemblies, disc spindle, and dough blade assembly in the storage box. To purchase, visit ninjaaccessories.com.

USING THE CHOPPING & DOUGH BLADE ASSEMBLIES

PARTS

• PRECISION PROCESSOR® BOWL & LID WITH 3-PART FOOD PUSHER
• CHOPPING BLADE ASSEMBLY
• DOUGH BLADE ASSEMBLY

BLADE ASSEMBLY

1. Place Precision Processor Bowl on base and turn clockwise to lock in place.
2. Holding the blade assembly by the top of the shaft, install it in bowl.
3. Place ingredients in bowl. Place lid on bowl and turn clockwise to lock in place.

PROCESS & ENJOY

Once the Precision Processor Bowl is locked onto the base, plug in the unit, then press the Power button to turn the unit on.

1. Select desired program to begin processing.
2. When processing is complete, press button on feed chute lid near handle to unlock. Turn lid counterclockwise and lift from bowl.
   • Remove blade assembly before emptying bowl.
3. Remove bowl from base by turning it counterclockwise, then lifting it up.

NOTE: Large food pusher must be inserted in the feed chute for the unit to run. For thinner recipes such as sauces and chopping, make sure all 3 parts of the pusher are installed to avoid splatter.

WARNING: Chopping Blade Assembly is sharp and not locked in place. Before pouring, carefully remove Chopping Blade Assembly. Failure to do so will result in a risk of laceration. Refer to the Ninja Safety Instructions for additional information.

USING THE DISC ASSEMBLIES

PARTS

NOTE: Not all accessories are included with all models.

DISC ASSEMBLY

1. Place Precision Processor® Bowl on base and turn clockwise to lock in place. Install the spindle, then place the disc on the spindle.
2. REVERSIBLE SLICING/SHREDDING:  Use plastic grip to place disc over spindle with the desired output facing up. Use the side labeled SLICER for slicing and the side labeled SHREDDER for shredding.

FOOD PREP

• If using the small or medium feed chute, trim ingredients to fit the feed chute height.
• If using the larger feed chute, DO NOT exceed the CHUTE MAX FILL line on the large feed chute. Unit will not run if ingredients exceed this line.
• Cut both ends off ingredients to create flat surfaces. Trim tapered ingredients like carrots to make them more symmetrical.

NOTE

• Ensure cheese is well chilled before slicing/shredding. DO NOT slice or shred frozen cheese.
• Keep ingredients as steady as possible when pushing through the feed chute.
• This will help minimize waste.

PROCESS & ENJOY (DISCS)

Once the Precision Processor® Bowl is locked onto base, plug in the unit, then press the Power button to turn the unit on.

IMPORTANT: As a safety feature, the large food pusher must be inserted in the feed chute for the unit to run.

1. Place feed chute lid on bowl and turn clockwise. Based on the ingredient, use the smallest possible feed chute opening for best slicing and shredding results.
2. If using the small or medium feed chute opening, select DISC or LOW. The disc will begin spinning. Add ingredients through the feed chute on the lid.
   • If using the large feed chute opening, place ingredients up to, but not exceeding, the CHUTE MAX FILL line. Insert the pusher into the feed chute, then select DISC or LOW. The disc will begin spinning.
   • IMPORTANT: Use only the DISC program or LOW setting when using the disc assemblies.
3. The disc will automatically stop spinning at the end of the program. Wait for disc to stop turning, then press the button on the feed chute lid near the handle to unlock. Turn lid counterclockwise and lift lid from bowl.
4. Remove the disc assembly by grasping the plastic grip, then remove the disc spindle. Remove bowl from base by turning it counterclockwise, then lifting it up.

CLEANING

• Dishwasher: The bowl, lid, disc, and blade assemblies are dishwasher safe. Ensure the blade assembly is removed from the bowl before placing in the dishwasher. Exercise care when handling blade assemblies.
• Hand-washing: Wash bowl, lid, disc, and blade assemblies in warm, soapy water. Exercise care when washing the blade assemblies. Use a dishwashing utensil with a handle to avoid direct hand contact with blades. Rinse and air-dry thoroughly.

WARNING: Always unplug the base before cleaning.

AUTO-IQ® PROGRAMS

• Intelligent preset programs combine unique blending and pausing patterns that do the work for you.
• Once an Auto-iQ program is selected, it will start immediately and automatically stop when processing is complete. To stop processing before the end of a program, press the currently active button again.

NOTE: Program run times vary from a few seconds to just over a minute.

• CHOP
  • Timed pulses and pauses give you consistent chopping results.
  • Run program once for a large chop, twice for a small chop, and three times for a mince. Use with chopping blade assembly.
• DOUGH
  • Ideal for creating delicious dough, from pie to pizza to cookie doughs. Use with the dough blade assembly.
  • NOTE: Use PULSE to add mix-ins, such as chocolate chips or raisins, after dough program has completed.
• PUREE
  • Create anything from silky-smooth sauces to the perfect hummus.
  • Use with the chopping blade assembly or nesting workbowl with small chopping blade assembly.
• DISC
  • Slice and shred a variety of ingredients, such as vegetables, cheese. Use with reversible slicing/shredding disc.

MANUAL PROGRAMS

• LOW and HIGH: When selected, each of these speeds runs continuously for 60 seconds. They do not work in conjunction with any Auto-iQ programs.
• PULSE: Offers greater control of pulsing and processing. Operates only when PULSE is pressed. Use short presses for short pulses and long presses for long pulses.

IMPORTANT: DO NOT run the unit on HIGH if using the dough blade or disc assemblies.

The unit is NOT intended to crush ice. Refer to the warnings in the Safety Instructions.

More Information

Scan the code for online help, FAQs, and How-To Videos: ninjakitchen.ca

For questions or to register your product, visit us online at: ninjakitchen.ca

• @ninjakitchencanada

© 2022 SharkNinja Operating LLC.
AUTO-IQ, NINJA, and PRECISION PROCESSOR are registered trademarks of SharkNinja Operating LLC.

References

• Sharkninja Home

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>