one LIGHT 65660AT Track Spot LED Installation Guide
- June 12, 2024
- one LIGHT
Table of Contents
one LIGHT 65660AT Track Spot LED Installation Guide
INSTALLATION
-
To mount the track adaptor into the track system, first check that the selector knob A is at OFF position and the adaptor lock B is disengaged.
-
When installing the adaptor into the track, ensure that it is orientated correctly.
-
Rotate adaptor lock B clockwise 90° to connect the adaptor to the neutral circuit.
-
Rotate selector knob A to the position of desired circuit.
-
Circuit 1: Rotate the knob A 90° clockwise from the starting position OFF, to connect circuit 1.
-
Circuit 2: Rotate the knob A 90° anti-clockwise from the starting position OFF, to connect circuit 2.
-
Circuit 3: Rotate the knob A 180° clockwise from the starting position OFF, to connect circuit 3.
-
-
1. Remove screws
2. Remove cover
3. Select the power according to the table
The default setting is 20W
Warnings:
- Make sure that the product is installed properly before connecting to electricity.
- Do not cover the fitting.
- Maintenance and installation should only be carried out by a professional electrician
Complete with driver
Documents / Resources
| one
LIGHT 65660AT Track Spot
LED
[pdf] Installation Guide
65660AT, 65660AT Track Spot LED, 65660AT Spot LED, Track Spot LED, Spot LED,
LED
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>