walkbase AT-2 Asset Tag Instruction Manual
- June 12, 2024
- walkbase
Table of Contents
walkbase AT-2 Asset Tag
Revision History
| Version number | Changes | Date | Person |
|---|---|---|---|
| 1.0 | First release | 8 May 2023 | VK |
| 1.1 | Package dimensions added | 8 June 2023 | VK |
Specifications
HARDWARE SPECIFICATIONS
Model| AT-2
Dimensions| 99 x 48 x 16.3 mm
Weight| 52g
Color| Black
IP protection class| IP67
Power supply| CR2477 Battery
Operating frequency range| 2.4-2.5GHz
|
Certification| CE, FCC, RoHS
Working temperature| 0 – 50°C
Housing material| PC
Package dimensions| 28 x 27 x 13 cm
Package weight| 2.6 kg
Package contents| 50x Walkbase AT-2 Asset tag
Packed separately| Backplates
M4 Square nuts
M4x14 Locking security bolts
Package Dimensions
Dimensions
Backplate Dimensions
Features
Mounting
Installation
Activating the tag for the first time.
- To activate the tag for the first time, wave a magnet over the top of the tag until an LED flashes once.
- After the tag has been activated, the tag is ready to be configured in the Walkbase Cloud management tools.
FCC Statement
FCC ID:2AU8X-AT-2
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- ● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
Caution : Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information: The device has been evaluated to meet general RF
exposure requirements. The device can be used in portable exposure conditions,
in compliance with exposure requirements.
Copyright 2023 Stratacache Inc.
www.walkbase.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>