U S SAWS US28000 Core EZ Drilling User Guide
- June 12, 2024
- U S SAWS
Table of Contents
U S SAWS US28000 Core EZ Drilling
Product Information
The Core EZ is a portable coring system designed for drilling anchor holes and
mounting core bits. It features a W24-230 9 Metabo Grinder as its motor and
has a capacity to hold 3 to 10 core bits (not included). The system operates
on 115V electrical requirements
with a minimum of 15 amps. The dimensions of the system are 24 x 17 x 11
inches, and it weighs 65 lbs.
The Core EZ stands out from other coring systems with its unique features:
- Centrally mounted guide shaft for easy centering of the core
- The system securely holds the core during drilling
- Reduced drag allows for higher drilling speed and less operator fatigue
- Designed for use in tight spaces
- Comes as a complete kit for convenient setup and usage
Product Usage Instructions
Step 1: Mark Center of Core & Drill Anchor Hole
- Mark the center of the desired core location.
- Drill an anchor hole at the marked center using an appropriate drill bit.
Step 2: Anchor Pin & Mount Guide Post
- Insert the anchor pin into the anchor hole.
- Mount the guide post onto the anchor pin, ensuring a secure fit.
Step 3: Mount Core Bit Assembly
- Attach the hex core bit tube to the grinder coupling.
- Slide the assembled core bit onto the guide post, aligning it with the anchor pin.
Step 4: Mount Gearbox
- Attach the gearbox to the grinder coupling.
- Ensure a secure connection between the gearbox and the core bit assembly.
Items included with your Core EZ kit:
- Grinder
- Grinder Coupling*
- Gearbox
- Carry Case
- Guide Post
- Water Feed Hex Core Bit Tube
- Adapter
- Anchor
*Factory Installed
Note: For horizontal drilling, vertical & angled drilling, and confined space drilling, follow the same steps mentioned above.
FEATURED ACCESSORIES
Other Accessories
PORTABLE CORING SYSTEM
Features
- Lightweight
- Easy and fast set-up and break-down
- No measuring off-sets
- Won’t damage surfaces
- Unit holds the core once drilling is complete
- All equipment fits in one case
Deluxe Package Includes
-
Grinder
-
Grinder Coupling*
Guide Post -
Water Feed Tube
-
Hex Core Bit Adapter
-
Gearbox
-
Carry Case
Other Required Equipment
- Water Supply
- Core Bit
- 3/8” Masonry Drill Bit
- Hammer Drill
- 3/8” Wedge Anchor
Specifications
- Part Number US28000
- Capacity 3 ” – 10” Core Bits (not included)
- Electrical Requirements 115V (minimum 15 amps)
- Motor W24-230 9” Metabo Grinder
- Dimensions 24” x 17” x 11”
- Weight 65 lbs
Items included with your Core EZ kit
WHAT SETS THE CORE EZ APART?
- Step 1: Mark Center of Core & Drill Anchor Hole
- Step 2: Anchor Pin & Mount Guide Post
- Step 3: Mount Core Bit Assembly
- Step 4: Mount Gearbox
- Centrally mounted guide shaft (no offsets to measure)
- The system holds the core
- Reduced drag allows higher speed and less load on the operator
- Designed for tight spaces
- One simple kit
1-866-987-7297 | www.ussaws.com
3702 W. Central Avenue Santa Ana, CA 92704
Phone 714 434 7297
Fax 714 434 7299
8004B E. Broadway Ave Tampa, FL 33619
Phone 813 621 8015
Fax 813 621 7125
References
- U.S.SAWS: Hand Concrete Floor Grinders & Diamond Cutting Blade
- U.S.SAWS: Hand Concrete Floor Grinders & Diamond Cutting Blade