MARVO KG901 Hot Swappable Keyboard Kit Installation Guide
- June 12, 2024
- MARVO
Table of Contents
MARVO KG901 Hot Swappable Keyboard Kit
PRODUCT PRESENTATION
CHARACTERISTICS
- Compact design with a slim frame and TKL layout
- Full anti-ghosting: N-key rollover support
- 20+ selectable lighting schemes
- Five macro keys programmable without driver (No.1 to No.5)
- Heavy-duty design: metal-made front plate and high-quality ABS
- Advanced customization software
TECHNICAL SPECIFICATIONS
- Keys: 87
- Switch type: mechanical (Blue)
- Switch rating: ;;, 50 million presses
- Key route: 3.8 ± 0.4 mm
- Operating force: 60 ± 10 g
- Backlight: 6-color Rainbow
- Interface: USB 2.0
- Cable length: 1.5 m
- OS support: Windows 7 or newer
SAFETY NOTES
- Keep the equipment dry. Keep away from Precipitation, humidity, and all types of liquids or condensation that may contain minerals that corrode electronic circuits.
- Never use the product with wet hands.
- Do not use or store the equipment in dusty or dirty areas. Do not store the equipment under high-temperature conditions (this may damage it).
- Do not store the equipment under low-temperature conditions (when it returns to normal temperature, condensation may form inside it which may damage the equipment).
- Do not drop, knock or shake the equipment (use may result in breakage).
INSTALLATION
Connect the keyboard to the available USB port on your computer; if the peripherals are used for the first time wait approx. 15 seconds to install the generic driver.
Abnormal Occurrences
For advanced mouse configuration, please download and install the specialized
driver at www.marvo-tech.hk (an Internet connection is required):
- Download the driver and double-click the executable file;
- Follow the on-screen instructions and install the application;
- After installing the application successfully, an icon will be displayed in the taskbar,
- Double-click this icon to launch the application.
USAGE INFORMATION
Macro recording mode
Step:1 Press FN + \: the key to enter the macro mode (First time to
enter, (1.2.3.4.5 digital area) keys backlight flashing. (1.2.3.4.5 digital
area) keys up to support 5 groups of macro recording)
Step2: Press (1.2.3.4.5 digital area) keys to select a group and enter
the macro recording state
Step3: Chose the key you want to record
Step4: Press FN + \: key to save record
When macro mode is turned on again the macro keys that had been recorded are normally on
- Press FN + (1.2.3.4.5 digital area) to apply the mode you had recorded
- Long press FN + ESC + Fl + F3 + FS to reset
Optically controlled
- Press FN+INSERT/DELETE/H0ME/END/PGUP/PGDN/SCROLL key to change the backlight mode.
- Press the FN+PU key to increase the brightness under the condition of long and bright light
- Press the FN+PD key reduces the brightness
TROUBLESHOOTING
In case of incorrect operation follow the steps below:
- Check the integrity of the connectors;
- Check the connection to the computer correctly;
- Check the correctness of your computer settings;
- Disconnect and reconnect the equipment; restart the computer. If the problem persists, please contact your local seller.
GENERAL INFORMATION
- Unauthorized repairs or disassembly of the product will void the warranty and cause damage.
- The product is safe, according to EU requirements.
- This product is manufactured in accordance with the European RoHS standard. This standard was introduced to reduce the amount of electrical and electronic waste emitted into the atmosphere.
- Using the WEEE symbol (pub with an X) indicates that this product is not household waste. When recycling waste properly protects the environment.