LLJ-B08G2 Table Blender Instruction Manual
- June 12, 2024
- LLJ
Table of Contents
LLJ-B08G2 Table Blender
SAFETY INSTRUCTIONS
In order to prevent accidents or injuries to the user, other people and damage to property, please follow the instruction below.
- Before use, please check the rated voltage that marked on the product rating lable is consistent with the voltage you use.
- Use power suppler with ground protection to prevent and mishap.
- Press gently on the power button.
- Please make sure the product is assembled properly before using.
- Do not insert or put anything in the product or eyes near the product while operating.
- Product should be assembled properly while operating to avoid spillage of ingredients.
- Please turn off the product when disassemble, assemble or move it.
- Do not put too hot ingredients (MAX 60℃) into the cup to avoid deformation and damage of the cup.
- Base and cup should be assembled tightly before install in the housing.
- Never place the body part in water or any other liquid. Never rinse it under the tap. Clean the outside of the body part with a moist cloth.
- If the product is automatically shut down while operating, please wait for 20-30 mins for cooling down.
- If any damage is found on the machine, please stop using it immediately to avoid injury.
Caution: This appliance is not intended for use by people (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision of instruction concerning use of the appliance by a person responsible for their safety.
PARTS & ASSEMBLY
- Measuring cup
- Blending cup cover
- Blending cup
- Silicon ring
- Grinding blade assembly
- Main body
- On/Off button
- Dry grinding cup
- Dry-grinding blade assembly
How to Use
Do clean the parts which have contact of food before usage.
Note: Temperature of food should not exceed 60℃.
Assembly and Usage
The appliance will work only after all parts are assembled well.
Blending:
Warning:
- Hot ingredients like water over 60℃ is not allowed to put into blending cup.
- Food amount should not exceed MAX scale.
- It is allowed to take off the measuring cup and add more ingredients when then appliance is working.
- Better to cut solid food smaller before filling the blending cup.
- When the appliance is working, finger or any sharp things are not allowed to put into the blending cup.
- Do not start the appliance before assembling the cover well.
- The max working time of the appliance is 1 min. Stop for 2 min after every 1 working min.
Grinding
Warning:
- Water or ingredient with much water like juice or fruit is not allowed to grind.2
- Do clean the grinding cup and blades assembly before use every time. Otherwise cup and blades assembly may not screw tightly enough.
- Do not use dry-grinding cup to grind solid food.
- The max working time of the appliance is 1 min. Stop for 2 min after every 1 working min.
Cleaning and Maintenance
NOTICE ABOUT CLEANING
- Do unplug the appliance from power supply before cleaning.
- Do clean the appliance in time after used.
- Clean the main body with wet cloth. Do not rinse the main body under tap nor put it into water or any liquid for cleaning.
- Do not use metal brush or nylon cloth to clean the product surface. Chemical agent like abstergent may damage the product surface too.
- It is normal if blending cup changes color after blending fruit or vegetable.
- Make sure all parts are clear before store the appliance, and store it in clean and dry place.
Follow the steps to disassemble before cleaning
Trouble Shooting
| Question | Possible Reason | Suggested Solution |
|---|
The appliance does not work
even plug on and function button is pressed.
| Not good assembly between
cups or chopper bowl and main machine.
| Take cups or chopper bowl off the main machine and
re-assembly well.
The appliance is smelly when begin to use for several times.
| ****
It is normal.
| Please contact service centre or distributor if the appliance is still smelly after
used many times.
Abnormal shutoff during working.
| Low voltage of power supply| Check the power supplier
Too much ingredient
| Plug off and take some
ingredient out.
Thermal protect of the motor
| Stop for 20-30 min and start
again.
Terrible vibration or sound noise
| The appliance is not put on
flat place. Or Feet are missing.
| Put the appliance on flat
place. And assemble all feet.
High voltage of power supply| Check the power supplier
Too much ingredient
| Plug off and take some
ingredient out.
Blades are blocked
| ****
Blades are blocked by ingredient
| Plug off and take some ingredient out and cut
ingredient into small piece.
Blending Cup leakage
| Silicon ring is missing or
broken.
| Assemble the silicon ring well
or change it.
Broker blending cup| Change the blending cup.
Remark s:
Please contact service centre or distributor if shooting trouble above cannot
be removed. Please do not disassemble the product by yourselves.
SPECIFICATIONS
| Product | Table Blender |
|---|---|
| Model | LLJ-B08G2 |
Rated
Voltage
| 220-240V~
Rated
Frequency
| 50Hz
Rated
Power
| 200W
Rating working
time
| ****
Less than 1min
Interval
Time
| More than 2 min
Capacity| 0.8L
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>