Paul Neuhaus Infrared remote control, white Instruction Manual
- June 4, 2024
- Paul Neuhaus
Table of Contents
Paul Neuhaus Infrared remote control, white
Operation Instruction
Handling via remote control
- ON
- OFF
- Press the button for long time, you can increase the brightness of the lamp continuously (up to 100%). Press the button shortly, you can increase the brightness of the lamp stepwise.
- Nightlight (approx. 10% of the brightness)
- Press the button for long time, you can change the color temperature of the light slowly from warm white to cold white. Press the button shortly, you can change the color temperature of the light stepwise from warm white to cold white.
- Press the button for long time, you can change the color temperature of the light slowly from cold white to warm white. Press the button shortly, you can change the color temperature of the light stepwise from cold white to warm white.
- Press the button for long time, you can reduce the brightness slowly (to 10%). Press the button for shortly, you can reduce the brightness stepwise.
- All lights in the infrared range of the remote control will be set to the same color temperature which was selected lastly with the remote control.
- 3-Steps color temperature (3000 Kelvin / 4000 Kelvin / 5000 Kelvin)
- Timer function (The light turns off after 30 seconds.)
Handling via wall switch
- Memory function : If you turn off the light via wall switch and turn on after >3 seconds the light lights up in the last mode (color temperature, brightness).
- CCT : The color temperature can be changed in 3 steps by switching on / off several times quickly: 3000 Kelvin / 4000 Kelvin / 5000 Kelvin.
Technical data
- Operation voltage : 3V
- Battery : 2x 1,5V AAA
- Range of the remote control : approx. 6m
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>