Rasonic RSC-B18R Multi Steam Cooker User Manual
- June 12, 2024
- Rasonic
Table of Contents
RSC-B18R/RSC-B18W
Multi Steam Cooker
For household use only
OPERATION MANUAL
-
Please read the operation manual carefully before using.
Keep it in a safe place for future reference. -
Some figures in this manual may not match with the real object, just for reference only.
Thank you for choosing Rasonic Multi Steam Cooker. Read the operation manual carefully before using and keep it for your future reference.
Important Safeguards
When using the appliance, please follow the safety precautions below:
-
Read the following safety precautions in the manual when using the appliance. Failure or negligence in observing these precautions could cause fire, electrical shock or personal injury.
-
Remove and discard all packing materials of the appliance. Make sure that children do not play with them to avoid any danger.
-
Do not operate in the same power socket with other high power consumption appliances to avoid overloading or danger. Also, check whether the rated voltage on the appliance is the same as the local voltage.
-
Use the appliance with the original power base only. Make sure the power base and main body are well connected before use; otherwise, it may cause power cord overheat or damage due to contact failure.
-
Do not insert metallic objects (such as pins or wire) into the enclosure, gaps of the power base to avoid electric shock or other dangers.
-
Never operate the appliance in following places:
– Humid environment or near water sources;
– Near heat sources (e.g. electric oven or induction cooker) or fire sources;
– Unstable surface;
– Near inflammable or non-resistant to heat objects (e.g. carpet, paper sheet, table cloth, curtain and towel etc.). -
Never leave the appliance unattended when using.
-
The appliance is not intended to be operated by means of an external timer or separated remote control system, as to prevent short-circuit or other flammable hazards.
-
If the appliance is not in use at room temperature below 0 ℃, do not keep connect with the electrical socket. Otherwise, the appliance may operate and heat up automatically and which may cause fire.
-
Before filling or emptying the pot, make sure the appliance is switched off. Do not take away the main body during operation.
-
Before operation, close the glass lid tightly to prevent boiling water spilling out or ejecting. Make sure the enclosure, power base and power cord are dry before use to avoid danger.
-
WARNING! Do not close to the glass lid or touch the enclosure during operation or right after use as massive steam will come out. Never touch the heating plate to avoid burning by residue heat, and be careful of the hot steam and hot water droplets dripping from the glass lid.
-
The appliance equipped with a boil-dry protection device.
If the appliance is accidentally switched on when the main body is empty or water inside is less than the minimum water level “ ”, it will be automatically switched off when the temperature exceeds the protection level. If the appliance was boiled dry once, switch off and lift the main body from the power base. Let the appliance cool down for 15 minutes before reuse. -
Sufficient room must be reserved for steam or air bubbles generated. Do not exceed the maximum water level “ ”; otherwise, water may be spilling out or ejecting during operation and cause hazards.
-
Do not use the appliance for stir-fry, fry and deep fry, otherwise, there may be a malfunction and danger.
-
Do not open the glass lid during operation, otherwise, the boiling water may spill out and cause burns. If necessary, switch off the appliance by turning the control knob to [OFF] position before open the glass lid.
-
Open the glass lid carefully after cooking to avoid condensed water droplets dropping from the lid onto the control knob or power cord. To avoid scalding by hot steam, make use of oven mitts.
-
When turning the control knob, do not turn it with extra force to avoid damaging the knob.
-
Avoid using the appliance to cook food which is acidic or alkaline.
-
Do not switch on the appliance when the main body is empty. Add some water or unplug the power socket immediately when water run out. Adding water with care to prevent burns.
-
After cooking, lots of vapor and water droplets will remain inside the body and the glass lid, which is a normal phenomenon. To avoid burns, do not touch the appliance or the heating plate. Switch off the appliance and unplug the power plug, wait for a few minutes before opening the glass lid to avoid burning by residue heat.
-
During operation, massive steam will be released from the steam vent. Be careful to avoid burns! Avoid using the appliance near the wall or furniture.
-
Do not move or shake the appliance during operation; otherwise, massive steam will be released causing burns or danger.
-
Never immerse the appliance, main body, power cord, power plug into water and power connector should not be in touch with water, as it will affect its safety performance and cause electric shock. Make sure the plug is dried before use.
-
When not in use or after usage, pull the power plug out of the socket to prevent electric shock due to insulation aging. Do not touch, plug in or remove the plug by wet hands, it can cause electric shock. Always clean the power plug, and ensure the appliance is clean and oil free to prevent fire.
-
Do not use the appliance outdoor or any purposes other than cooking. (Misuse can cause potential injury and product damage.)
-
Beware of hot steam that comes out of the appliance during operation or when open the lid. Use kitchen utensils with long handles when checking the food inside is necessary.
-
To prevent overheating the appliance, do not cover anything on the appliance or block the steam vent and the glass lid to avoid lid deformation or discolor.
-
When the appliance is in use or right after use, there may be some condensed water on the power base. This is a normal phenomenon but not malfunction.
-
Keep it out of reach for infants. Great care is necessary in using the appliance, especially near children. Make sure that they do not play with the appliance. Also, children without adult supervision should not operate the appliance or do maintenance, and keep them away from the appliance and its cord.
-
When the appliance is not in use, unplug it from the power socket and empty the pot. Let the appliance cool down before moving, cleaning or checking.
-
Do not place heavy objects on the power cord. Never clip, modify, stretch or twist the power cord. Make sure to grasp the plug itself but not the power cord when plug in or unplug the appliance.
-
Do not operate the appliance when the power cord is tangle or hang over the edge of a table, countertop or in touch with any hot surface, it may cause the appliance and its power cord damage.
-
The appliance is intended to be used in household or similar applications such as staff kitchen in shops, offices and other working environments. Do not use it outdoors and in any other purpose or method which is not following the instructions in the user manual. If the appliance is used improperly, for commercial or semi-commercial use, the warranty becomes invalid and our company will refuse any liability and repairing cost for the damage caused.
-
The appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
-
Always examine the appliance, power base, power cord and plug. To avoid hazards, stop using the appliance immediately and contact Shun Hing Electric Service Centre Limited for checking and repairing if any part is damaged. Do not attempt to refit the appliance by yourself or replace any unauthorized parts, otherwise it can cause hazards and the warranty will become invalid.
Cleaning and Storage
-
Before cleaning the main body, turn the control knob to [OFF] position. Always remove the plug from the power socket, lift the body from power base and let it cool down.
-
Main body cleaning: Do not rinse the appliance with water. Use a damp cloth to clean the appliance enclosure. If it is too dirty, wipe it with a damp cloth with a little mild detergent, then wipe with damp cloth.
-
Main body cleaning: Clean it with soft brush or sponge moisten with mild detergent. Never use cleaning powder or harsh cleaning tools (e.g. metal-wired brush).
-
After use, some color spots and discolor (e.g. red, milky, black, etc.) may appear in the pot and on the heating base. It is because water contains impurities or scale. The harder the water, the faster the scale will build up. Scale may occur in different colors, but it is normal phenomenon.
-
Scale is harmless, but too much scale will affect the performance of the appliance. To avoid, descales regularly.
-
Descaling by the following method:
6.1 Put halved sliced lemon in the pot (Or follow the ratio to add 20g citric acid per 1L water);
6.2 Fill cold water to the maximum water level “”;
6.3 Switch on the appliance and let the water boil once. After boiled, switch off the appliance and let it cool down for 15 minutes. Switch on the operation again and repeat the boiling process for 3 times;
6.4 Empty the water and clean the pot with a sponge or soft brush, then rinse with clean water; Repeat the procedure if some scale remains in the appliance. Attention! Add water to boil again and then empty the appliance to clear the smell. -
Never use poisonous or corrosive detergent for cleaning.
-
After cleaning, let the appliance cool down completely before storage. Put it in a box and store in a dry place. When store, wind the power cord at the bottom of power base. Never wrap it tightly around the power base or put pressure on it to avoid the power cord damage.
Before First Use
Clean the pot and steam plates by using sponge moisten with mild detergent.
After cleaning, add water until reach the maximum water level “”. Start the
operation until water boiled, wait and pour them out to give better cleaning
performance.
CAUTION: Do not clean the enclosure by water directly as to avoid water
penetrating into the appliance (especially the power connector) to prevent
malfunction and other hazard.
Product Specifications
| Model No. | RSC-B18R | RSC-B18W |
|---|---|---|
| Color | Red | Creamy |
White
Rated Voltage| 220-240V – 50/60 Hz
Rated Power| 800 – 950 W
Capacity| 1.5 L
Net Weight (approx)| 1.5 kg
Product Size (W x D x H)| 249 x 202 x 262 mm
Product Description
Product Structure
Control Panel
| OFF | Power Off |
|---|---|
| Low power | |
| High power |
Remarks: The above illustrations are for reference only. Size may differ from real object and subject to the actual appliance.
Operation Instructions
- Make sure that the control knob is turned to [OFF] position, then close the glass lid.
- Add ingredients and water into the pot before closing the glass lid. Attention! Water added must be in between the minimum water level “” and the maximum water level “”.
- Make sure the power base and main body are well connected before use; otherwise, it may cause power cord overheat or damage due to contact failure. Attention! Operate the appliance with the original power base only.
- Make sure the appliance is plugged firmly before use.
- Turn the control knob to the desired power level. There are two power levels for selection (which is Low power “ ” and High power “ ”). The power indicator will light up when the control knob is turned to either Low power or High power, which means the appliance is in operation.
- Take away the glass lid when water boiled, and turn the control knob to the Low power level, then add ingredients to prevent boiled water spilling out. If glass lid is needed, always pay attention during operation to avoid condensed water droplets dropping off the glass lid onto the control knob or power cord.
- Turn off the appliance by turning the control knob to [OFF] position, the power indicator will be off which means the appliance is switched off. Unplug the power plug afterwards.
CAUTION! The appliance equipped with boil-dry protection system. If
water inside the main body completely evaporated or temperature exceeds the
protection level, the appliance will be automatically switched off. If the
appliance was boiled dry once, switch off and lift the main body from the
power base and cool down 15 minutes before reuse. Never leave the appliance
unattended during operation.
CAUTION! The appliance does not equip with oil temperature control
system, stir-fry, fry and deep dry are prohibited. Otherwise, overheated oil
may catch fire or damage internal electric components. And, the appliance
equipped with a boil-dry protection device, it will be automatically switched
off when the temperature exceeds the critical level.
Special Avowal
- The content in the manual has been checked. Our company reserves the hermeneutic power to any printing errors or misunderstanding on the content.
- If there are technical improvements on the appliance, the operation manual will be updated in new version without prior notice. The product appearance and specification are subject to the manufacturer information.
- In case there is any inconsistency or conflict between the English versions and Chinese versions of the terms, the Chinese versions shall prevail.
- E-copy of user manual can be sent by e-mail on requested, please call Shun Hing Electric Works & Engineering Co. Ltd. at 2861 2767.
After Sales Service
- For any defect, in the judgement of technician from Shun Hing Electric Service Centre Limited, cause under normal use, our company is responsible for repairing and replacing any parts of the said electrical appliance free of charge within one year guarantee period commencing from the date of purchase. Any defective part which has been replaced shall become our property. Warranty service does not cover the repair or replacement of consumable parts (Including glass lid and steam plate.). If appliance is used improperly, for commercial use or semi-commercial use, or not following the instructions in the operation manual, the warranty becomes invalid and our company will refuse any liability and repairing cost for the damage caused.
- User must present the official invoice/redemption voucher and the product warranty card with the chop from sales point/redemption center for maintenance. For enquiries, please call Shun Hing Electric Service Center Limited hotline at 2406 5666.
SHUN HING ELECTRIC WORKS AND ENGINEERING CO., LTD.
Office: 9/F, Peninsula Centre, 67 Mody Road, Tsimshatsui East, Kowloon,
Hong Kong
Tel: 2861 2767
Fax: 2865 6706
Website: http://www.rasonic.com
E-mail: shew@shunhinggroup.com
11/F, Shun Hing Centre, 2 Shing Yiu Street, Kwai Chung, N.T. HK
Service Hotline: 2406 5666
Fax No.: 2408 0316
Website: http://www.shesc.com/en
Customer Service Centres:
1/F, Shun Hing Centre, 2 Shing Yiu Street, Kwai Chung, N.T.
9/F., Block B, Peninsula Centre, 67 Mody Road, Tsim Sha Tsui East, Kowloon
22/F, Parkview Centre, 7 Lau Li Street, Tin Hau, Hong Kong
Avenida de Venceslau de Morais, No. 193-199, 5 andar – I, Edf. Industrial Nam
Leng, Macau
For the latest information of Hong Kong and Macau service center, please visit
http://www.shesc.com/en
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>