BOSCH AP-T07 Cabin Filters Installation Guide

BOSCH AP-T07 Cabin Filters

Installatio n Guidelines for Cabin Filters

Part Number : AP-T07 0986 AF7 009

This manual describes how to replace the cabin filter. Before installing, please be sure to read this book to ensure safe and correct installation. Estimated Installation Time: 5-10 minutes In some cases, tools are required and replacement work adds additional time. Recommended replacement time 1 year or 10,000km However, it is recommended to check and replace your cabin filter as soon as possible when driving in heavily soiled areas. The contents of this installation guide are accurate as of May 2022

Recommended replacement time
1 year or 10,000km

Precautions for installation and use

• Be sure to park your vehicle in a sate place with the engine and air conditioner turned oft before commencing the replacement process.
• When replacing your cabin niter, please refer to the instruction manual of the venice, maintendnce manude, etc.
• This guide is just an examole and may differ from the actual venicle
• Please refrain from unreasonable work. It may result in damaging the vehicle or personal injury.
• You are not concent in he work pease consult your ocarworkshoo check the direction of the arrow so that vou do not mistake the tront and back of the filter when installing.
• This product displays AIR FLOw wind direction with an arrow, but other companies may display TOP UP” on their filters.

Type 1

1. Removing the glove box
2. Step 1:
3. Please switch the inside/outside air changeover
4. Step 2:
5. 1. Open the glove box in the direction of the arrows
6. Remove the claws, then glove Dox.
7. Removing the old cabin filter
8. Step 1:
9. Raise the filter cover and pull it towards yourself
10. Step 2:
11. Push the lock (2 places) and pull the filter tray towards yourself.
12. Installing your Bosch cabin filter
13. Insert the Bosch cabin filter with the “AIR FLOW” arrow pointing Gown
14. Restore the removed vehicle parts to their original positions

Type 2

1. Step 1:

2. Open the glove box, press from both sides to remove the pins (2 places)

3. Remove the glove box

4. Step 2:

5. For vehicles with a damper, pull the damper from the claws before removing the glove box

6. Removing the old cabin filter

7. Finch the nook on the lett side or the filter cover

8. Remove the tilter cover

9. Installing your Bosch cabin filter

10. Move the old filter in numerical order in the figure and to remove it.

11. install the Bosch casin filter in reverse order of the removal

12. Restore the removed venicle parts to their original positions

An Attention

• This work procedure is an example and may vary across different vehicles.
• Bosch’s cabin filter indicates airflow with an arrow on the product. Please note that the arrow may indicate “TOP” on other genuine or lAM products.
• Please read the “Precautions for installation and use” on the installation guide cover be- fore commencing.
• NOTE: used cabin filters cannot be cleaned and reused.

Robert Bosch (Australia) Pty. Ltd.
1555 Centre Road
Clayton VIC 3168
For Further information please contact Bosch on:
Email: CustomerService.AA@au.bosch.com
Australia: 1300 307 040 www.boschaftermarket.com.au
New Zealand 0800 452 896 www.boschaftermarket.co.nz

References

• Invented for life | Bosch Global
• Home | Bosch Mobility Aftermarket in Australia and New Zealand
• Home | Bosch Mobility Aftermarket in Australia and New Zealand

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>