BOSCH AP-S08 Aeristo Premium Cabin Air Filter Instruction Manual

BOSCH AP-S08 Aeristo Premium Cabin Air Filter

Product Information

• Manufacturer: Robert Bosch (Australia) Pty. Ltd.
• Address: 1555 Centre Road Clayton VIC 3168
• Contact Information:
  • Email: CustomerService.AA@au.bosch.com
  • Australia Phone: 1300 307 040
  • Website: www.boschaftermarket.com.au
  • New Zealand Phone: 0800 452 896
  • Website: www.boschaftermarket.co.nz
• Product Name: Bosch Cabin Filters
• Part Number: AP-S08 0986 AF7 017

Product Usage Instructions
Please follow the steps below for the safe and correct installation of the Bosch Cabin Filters:

1. Read the installation guide carefully before proceeding with the installation.
2. Estimated installation time: 5 – 10 minutes.
3. Recommended replacement time: 1 year or 10,000km.
4. Replace the cabin filters as soon as possible when driving in heavily soiled areas.
5. Make sure to restore any removed vehicle parts to their original positions.

Precautions for Installation and Use
Please take note of the following precautions:

• Use only genuine Bosch Cabin Filters (Part Number: AP-S08 0986 AF7 017).
• Refer to the installation guide for specific instructions on removing the glove box.
• Handle the cabin filters with care to avoid damage.
• Ensure proper positioning and alignment of the cabin filters during installation.
• For any further questions or concerns, please contact Bosch using the provided contact information.

This manual describes how to replace the cabin filter. Before installing, please be sure to read this book to ensure safe and correct installation. Estimated Installation Time: 5 – 10 minutes In some cases, tools are required and replacement work adds additional time.

Recommended replacement tim e

• 1 year or 10,000km
• However, it is recommended to check and replace your cabin filter as soon as possible when driving in heavily soiled areas.
• The contents of this installation guide are accurate as of May 2022

Precautions for installation and use
Be sure to park your vehicle in a safe place with the engine and air conditioner turned out before commencing the replacement process. When replacing your cabin filter, please refer to the instruction manual of the vehicle, maintenance manual, etc. This guide is just an example and may differ from the actual vehicle. Please retrain from unreasonable work. It may result in damaging the vehicle or personal injury. If you are not confident in the work please consult your local workshop. Check the direction of the arrow so that you do not mistake the front and back of the filter when installing. This product displays AIR FLOW (wind direction) with an arrow, but other companies may display “TOP UP” on their filters.

Cabin Filter Installation Guide

How to remove the glove box

1. Open the glove box
2. Push the glove box inward in the order of left -> right And pull it towards yourself
3. Remove the stopper
4. Take out the glove box

Removing and installing the cabin filter

1. Pinch the knob (2 places) on the filter cover to remove it

2. Pull the old cabin filter towards yourself to remove it

3. Insert your Bosch cabin filter with the “AIR FLOW” arrow pointing downwards

4. Restore the removed vehicle parts to their original condition.

Attention

• This work procedure is an example and may vary across different vehicles.
• Bosch’s cabin filter indicates airflow with an arrow on the product. Please note that the arrow may indicate “TOP” on other genuine or IAM products.
• Please read the “Precautions for installation and use” on the installation guide cover before commencing.
• NOTE: used cabin filters cannot be cleaned and reused.

References

• Invented for life | Bosch Global
• Home | Bosch Mobility Aftermarket in Australia and New Zealand
• Home | Bosch Mobility Aftermarket in Australia and New Zealand

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>