DELL 3030 Wyse Cloud Client User Guide

Dell Wyse Cloud Client 3030
Quick Start Guide

3030 Wyse Cloud Client

1. Install the vertical stand or the VESA mount Vertical stand VESA mount

2. Connect the keyboard and mouse USB connector

3. Connect the network Network connector Wireless antenna Fiber SFP module
   NOTE: To remove the Fibre SFP module, rotate the latch and unplug it from its slot.

4. Connect the display DVI-I connector DVI-D connector VGA adapter

5. Connect the power cable on your client device and display Client device power connector Display power connector
   NOTE: Your client device is ready to use when the client device activity light goes off.

6. Turn on your client device and display

Product support and manuals| dell.com/support
dell.com/support/manuals
---|---
Contact Dell| dell.com/contactdell
Regulatory and safety| dell.com/regulatory_compliance
Regulatory model| N03D
Computer model| Dell Wyse Cloud Client 3030

Features

NOTE: Components may vary based on model and location.

1. Power on/off button and light
2. Activity light
3. SuperSpeed USB 3.0 port
4. USB 2.0 port (3x)
5. Headphone/microphone jack
6. Feet
7. Wireless antenna port (optional)
8. Serial port
9. DVI-I port
10. Product information tab
11. Network port, 10/100/1000 Base-T
12. +12V Power adapter input
13. DVI-D port
14. Network port, 10/100/1000 Base T, or SFP/Mini-GBIC slot
15. Lock receptacle (non-wireless only)

Printed in Malaysia.
© 2015 Dell Inc.
2015-04

References

• Support | Dell US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>