EROfase 38893 Lenora LED Mirror Instruction Manual
- June 12, 2024
- EROfase
Table of Contents
EROfase 38893 Lenora LED Mirror
Thank You
You’ve just purchased a lighting product designed and built to provide you
with years of enjoyment.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
- Follow the assembly instructions by reading the numerical order.
- Use a qualified electrician for the installation of this lighting fixture.
- Before installing the fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Codes or Canadian Electrical Code standards.
- Use CSA or UL-certified wire connectors suitable for the gauge, type, and number of conductors.
- Attach the junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together. If the junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
- Estimated Assembly Time: 20 minutes
- Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape, and Wire cutters.
- Helpful Tools (not included): Wire strippers, Ladder
OVERVIEW
- Press and hold the switch for dimming the lumens.
- Press once to change color temp. and on-off.
- 100W LED, 120V 60Hz Dimmable LED driver included
- A- Outlet Box screw x 2
- B- Black wire(L) from a junction box
- C- White wire(N) from a junction box
- D- Green wire/Bare copper (G) from a junction box
- E -Black wire (L) from the fixture
- F -White wire (N) from the fixture
- G- Green wire/Bare copper from the fixture
- H- Wire connector × 3
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>