madison MAD-MUSICA50 Bluetooth Party Speaker User Manual

: June 12, 2024
: madison

Table of Contents

madison MAD-MUSICA50 Bluetooth Party Speaker
TOP PANEL
INSTRUCTION
CONTROLS
USB OPERATION
BLUETOOTH OPERATION
SPECIFICATIONS
EU Declaration of Conformity
Read User Manual Online (PDF format)
Download This Manual (PDF format)

madison MAD-MUSICA50 Bluetooth Party Speaker

TOP PANEL

madison-MAD-MUSICA50-Bluetooth-Party-Speaker-
FIG-1

INSTRUCTION

PLEASE READ THE MANUAL CAREFULLY AND KEEP IT FOR FUTURE REFERENCE. CHARGING THE BATTERY
Plug the small connector of the adaptor into the charging port (5) on the top of the speaker and the other end into a wall outlet. The display (14) shows the battery level that increases during charge until it is full. When the battery voltage runs low, a tone will be heard, indicating that the battery needs to be charged

IMPORTANT NOTE ON LITHIUM-ION BATTERIES

PRIOR TO USING THE UNIT FOR THE FIRST TIME, PLEASE CHARGE FULLY THE BATTERY
CHARGE THE BATTERY REGULARLY AFTER EACH USE. DON’T WAIT UNTIL IT IS DISCHARGED!
DON’T allow the battery to discharge completely, otherwise it will lose 20% of its capacity or even be totally damaged! If the voltage becomes too low, the internal circuits are not powered anymore and it will become impossible to recharge the battery!
If you don’t use the unit for a longer period of time, it is recommended to charge it at 40% of its capacity and check/charge it once per month.

BATTERIES ARE NOT COVERED BY THE WARRANTY WE CANNOT BE HELD RESPONSIBLE FOR DAMAGED BATTERIES FURTHER TO THE NON-OBSERVANCE OF THESE BASIC RULES.

CONTROLS

MIC input
AUX input
TF input
USB input
DC 9V input
MENU
REC
MODE/MIC PRI
On/Off
Previous Track / CH-
Play/Pause/TWS
Next Track / CH+
LED Switch
Display
Volume control

USB OPERATION

Insert a USB device into USB port (4) to play music stored on the drive. The play will start automatically.
MICRO-SD OPERATION
Insert a micro-SD card into TF port (3) to play music stored on the drive. The play will start automatically.

BLUETOOTH OPERATION

POWER button: Long press the POWER button (9) to turn the speaker on. The display (14) will slowly flash “bLUE” to indicate that the speaker is on. Keep the POWER button (9) pressed to turn the unit off. The display (14) will always show “bLUE” when connected.
Turn on the Bluetooth function on your external Bluetooth device and search for “MUSICA” . Enter the password “0000” if required. After a successful pairing, you will hear a sound.

USE WITH A WIRED DEVICE
To use the speaker as a wired device, plug one connector of the 3.5mm audio cable into the 3.5mm auxiliary audio input jack (2) on the speaker. Plug the other connector into the headphone jack of your media-playing device. Press the button MODE (8) to switch to LINE mode. The display (14) will show “LINE”, while connected. Playback is controlled via the wired device.

MENU BUTTON(6)
Press the button MENU (6) and rotate the volume knob (15) to control the functions below:

1x press→ T: Treble
2x press→ b: Bass
3x press→ n: Mic vol
4x press→ E: Echo
5x press→ d: Mic delay
6x press→ U: Music vol

REC
Microphone recording in USB and TF mode.
MODE / MIC PRI
Short press on this button (8) to toggle between following modes: BT, AUX, USB, TF. In BT, USB and TF mode, keep the button pressed to enter into MIC Priority. The display will show “n-OF”. MIC PRI means the music will stop when you speak into the connected microphone (not included), and will resume play automatically when you stop speaking into the microphone.
PREVIOUS TRACK / CHShort
press on button (10) to move backwards through the playlist in BT, USB and TF MODE. Keep the button pressed to rewind music in USB and TF mode.
PLAY/PAUSE / TWS
Short press on this button to play/pause (11) the music in BT, AUX, USB and TF mode. Keep the button pressed on both units to activate the TWS mode. When both units have been paired successfully in TWS mode, you can connect just one unit to MUSICA. The display on one speaker will flash slowly “Blue” and the display of the other speaker will keep showing “BT01”. Now you can control both units via your BT device. Keep the TWS button pressed on one of the speakers to disconnect the TWS function on both speakers.
NEXT TRACK / CH+
Short press on button (12) to move forwards through the playlist in BT, USB and TF MODE. Keep the button pressed to fast forward music in USB and TF mode.
LED SWITCH
Short press to browse through the light modes. Keep the button pressed to turn off the light.
VOLUME ADJUSTMENT
Turn the VOLUME knob (15) to control the music volume.

SPECIFICATIONS

Power supply…………………………………………………………………………….. 9V? 1.5A via supplied mains adaptor
Battery…………………………………………………………………………………………………. Lithium-ion 7.4V? 3600mAh
Consumption……………………………………………………………………………………………………………………………40W
BT frequency band……………………………………………………………………………………………………. 2402-2480MHz
Max. RF emission power……………………………………………………………………………………………………..2.12dBm
Output power…………………………………………………………………………………………………………………………500W
Woofers………………………………………………………………………………………………………………………..2 x 8″/20cm
Dimensions………………………………………………………………………………………………………. 275 x 295 x 578mm
Weight………………………………………………………………………………………………………………………………… 5.65kg

Correct disposal of the product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

EU Declaration of Conformity

Hereby we, LOTRONIC SA
Avenue Zénobe Gramme, 9
1480 SAINTES
Belgique
+32.2.390.91.91

Certify and declare under our sole responsibility that the following product:

Trade name: MADISON
Product name: Portable speaker
Type or model: MAD-MUSICA50

Conforms to the essential requirements of the RED directive 2014/53/EU, ErP directive 2009/125/EC, Commission Regulation (EC) No 2019/1782, 2011/65/EU RoHS directive, the Commission Delegated Directive (EU) 2015/863 and the battery directive 2006/66/EC, based on the following specifications applied: