Muuto DOTS Coat Hooks Set Instructions
- June 12, 2024
- Muuto
Table of Contents
DOTS Coat Hooks Set
Instructions
DOTS Coat Hooks Set
WALL MOUNTING GUIDE
When mounting your Muuto product to a wall, it is important that it is mounted
both securely and correctly. The best way to mount your product depends on the
type of wall it is being attached to.
A wall plug is required and it is vital that you find one that fits both the
screw and the wall material.
If in doubt, ask for advice in your local hardware store. They will be able to
assist you in finding the right wall plug and screw.
ASSEMBLY INSTRUCTION
- Before mounting your Dot to the wall, drill a 6 mm hole and add a plug.
- Add the screw to the plug.
- Screw on your Dot (be careful not to tighten too hard to avoid damage inside.)
Metal Dots
- Metal Dots can be installed as a cabinet handle as shown below.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>