ONEK SNAPTILE Modular Recycled Plastic Tile for Outdoor Instructions
- June 12, 2024
- ONEK
Table of Contents
ONEK SNAPTILE Modular Recycled Plastic Tile for Outdoor
Product Information
| Product Name | Snaptile |
|---|---|
| Description | Draining tile with stone effect on the surface, made of |
recycled and recyclable plastic. Easy and fast installation thanks
to the practical hooking system. Suitable for outdoor use.
Dimensions| 38 cm x 38 cm (1 sqm = 6,9 pcs)
Thickness| 2,5 cm
Material| PP + HDPE
Slip Resistance| Class R10*
Thermal Expansion| No specific value provided
Use Ideal For| Implementation or restoration of outdoor flooring such as
gardens, terraces, balconies, patios, relax areas, walkways
Benefits|
- Easy to install and remove thanks to the hooks
- Draining and anti-slip surface
- Suitable for all project surfaces
- No special maintenance required. Easy to clean.
- Made of 100% recycled and recyclable plastic.
Product Usage Instructions
Installation:
The Snaptile should be laid on flat and rigid surfaces suitable for supporting the operating loads. Follow these steps for installation:
- Prepare the surface by ensuring it is clean and free from debris.
- Start at one corner of the area where you want to install the Snaptile.
- Align the first tile with the corner and hook it into place using the practical hooking system.
- Continue adding tiles, aligning them properly and hooking them together until the desired area is covered.
- If necessary, cut tiles to fit around edges or obstacles using appropriate tools.
- Ensure all tiles are securely hooked together and properly aligned.
Cleaning and Maintenance:
The Snaptile does not require any special maintenance. To clean the product, you can follow these guidelines:
- If the environment allows it, use a pressure washer set at moderate pressure to clean the Snaptile.
- If a pressure washer is not available, use a wet cloth with a non-aggressive neutral detergent to wipe the surface. Rinse afterwards.
Warning:
Due to the natural expansion of the plastic material, using the Snaptile in places susceptible to thermal variation and/or direct sun exposure may cause the floor to bend. To avoid this, provide adequate joints/spaces between the tiles and keep the elements unhooked. Ensure the Snaptile is laid on a flat and rigid surface suitable for supporting the operating loads.
SNAPTILE
DESCRIPTION
Draining tile with stone effect on the surface, made of recycled and recyclable plastic. Easy and fast installation thanks to the practical hooking system. Suitable for outdoor use.
DATA & MEASURES
DATA & MEASURES
Dimension| 38 cm x 38 cm (1 sqm = 6,9 pcs)
Thickness| 2,5 cm
Material| PP + HDPE
TECHNICAL DATA
TECHNICAL DATA
| TEST| VALORE
Slip Resistance | DIN 51130:2014-02| Class R10
Thermal expansion| Pontarolo Engineering| 0,05 – 0,2 mm/m° C
Definition of the slipperiness according to the classification DIN 51130: 2014-02 ( BGR 181: 2003 ) :values range from R9 (the worst) to R13 (the best). R10 corresponds to an average value of angle higher than 10 °and up to 19 °.
The values are given for a temperature of 20º. In case of higher temperatures, the value will decrease.
BENEFITS
BENEFITS
Easy to install and remove thanks to the hooks
Draining and antislip surface
Suitable for all the project surfaces
No special maintenance required. Easy to clean.
Made of 100% recycled and recyclable plastic.
USE
USE
USE| Implementation or restoration of outdoor flooring
IDEAL FOR| Gardens, terraces, balconies, patios, relax areas, walkways
INSTALLATION
The installation is easy and fast. It does not require any special tools.
- Place Snaptile on a flat and rigid surface and install the elements interlocking the female and male hooks by exerting moderate pressure. Proceed horizontally in rows starting from left to right and from the top to the bottom.
We recommend to start from a corner and proceed placing the tiles with the hooks in the same direction.
If necessary, it is possible to fasten the tile to the substrate using the holes in the hooks. Due to the pattern chosen for the installation, it can be necessary to cut sime hooks. Cutting the plastic hooks is quite easy: the operation can be made using jigsaw. During these operations we recommend to use and wear appropriate saefty tools and gloves.
CLEANING AND MAINTENANCE
The product does not require any special maintenance. If the environments allows it, Snaptile can be cleaned using a pressure washer set at moderate pressure. In case it was not possible, use a wet cloth with a non-aggressive neutral detergent; ramp and rinse.
WARNING
Due to the natural expansion of the plastic material, the use of Snaptile in
places susceptible to thermal variation and/or direct sun exposure may cause
the floor to bend: this phenomenon can be avoided by providing adequate
joints/ spaces by keeping the elements unhooked. Snaptile must be laid on flat
and rigid surfaces suitable for support the operating loads.
Pontarolo Engineering Spa
Via Clauzetto n° 20 Z.I.P.R. – 33078 San Vito al Tagliamento (PN) – Italy | T.
+39 0434 857010 | F. +39 0434 857014
info@onek.biz
www.onek.biz
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>