GAGGENAU VI462113 Vario Flex Induction Cooktop User Manual
- June 9, 2024
- Gaggenau
Table of Contents
GAGGENAU VI462113 Vario Flex Induction Cooktop
VI462113
Vario flex induction cooktop 400 series
Width 60 cm
Can be combined perfectly with other Vario appliances of the 400 series
Stainless steel frame
Flex function for combining the rectangular cooking areas
Free positioning of cookware inside combined cooking areas with automatic
extension up to 30 cm width Frying sensor function for temperature control in
pans
Easy control of all functions with bicoloured display
Solid stainless steel control knob Precision crafting of 3 mm stainless steel
For surface mounting with a visible edge or for flush mounting
Cooking zones
2 flex induction cooking areas 19×23 cm (2200 W, with booster 3700 W), linked
together 38×23 cm (3300 W, with booster 3700 W).
Handling
Control knobs with illuminated
ring, cooking zone and output level markings.
Electronic power control in 12 output levels.
User friendly control with bicoloured display (white / orange).
Features
- Flex function for rectangular cooking areas.
- Frying sensor function.
- Booster function.
- Stopwatch.
- Short-term timer.
- Options menu.
- Power management.
- Cooktop-based ventilation control (with suitable hood).
Safety
2-stage residual heat indicator. Operation indicator.
Pot detection.
Safety shut-off.
Planning notes
Depending on the type of installation (surface-mounted or flush-mounted), the
specific location of the cut-out and the knob positions may vary.
The horizontal positioning of the knobs may be aligned with the specific
cooking areas.
The drawing “Installation of the control knob” must be observed if the panel
is more than 23 mm thick (there must be a recess at the rear).
If combining several Vario appliances of the 400 series, a connection strip VA
420 must be placed between the appliances. Depending on the type of
installation, the corresponding connection strip must be provided. The bearing
capacity and stability, in the case of thin worktops in particular, must be
supported using suitable substructures. Take into account the appliance weight
and additional loads. Additional instructions for flush mounting:
Installation is possible in worktops made of stone, synthetics or solid wood.
Heat resistance and watertight sealing of the cut edges must be observed.
Concerning other materials please consult the worktop manufacturer.
Characteristics
Product name/family
Cooking zone ceramic
Construction type
Built-in
Energy input
Electric
Total number of positions that can be used at the same time
4
Type of control setting devices
Min. required niche size for installation (HxWxD)
57 x 568-570 x 491-493
Width of the appliance
590
Dimensions (HxWxD)
57 x 590 x 520
Dimensions of the packed product (HxWxD)
123 x 875 x 610
Net weight
17.2
Gross weight
18.7
Residual heat indicator
separate
Location of control panel
External control
Type of external control possibility
Basic surface material
Ceramic
Color of surface
Black, Stainless steel
Color of frame
Stainless steel
Length electrical supply cord
150
EAN code
4242006289812
Electrical connection rating
Gas connection rating
Fuse protection
2*16
Voltage
220-240
Frequency
50; 60
The groove must be continuous and even, so that uniform placing of the
appliance on the gasket is ensured. Do not use discontinuous lining.
The joint width may vary due to size tolerances of the combinations and of the
worktop cut-out.
If installing several appliances in individual cut-outs allow for a division
bar of minimum 50 mm between the individual cut-outs.
Operates with magnetic (induction) iron pots and pans only. For an optimal
heat distribution, the use of sandwich bottom cookware is recommended. The wok
pan WP 400 001 cannot be used with this appliance.
Appliance can be snapped into the worktop from above.
Appliance weight: approx. 17.
Connection
Total connected load 7.4 KW. Connecting cable 1.5 m without plug.