trevi T-Fit 270 S CALL Smart Watch User Manual

: June 12, 2024
: Trevi

Table of Contents

Product Specifications
Charging instruction
Product details
Use the Touch Screen
Downloading App and use
Smart Watch Features
WARNING
Common problem handling
Read User Manual Online (PDF format)
Download This Manual (PDF format)

trevi T-Fit 270 S CALL Smart Watch User Manual

Please read the manual before use.

The information contained in this document will not be modified or extended in accordance with any notice.
The watch must be charged at least 2 hours before use.

Product Specifications

Model: T-Fit 270 S CALL
CPU RTL 8762D
ROM 64Mb
Capacitive Touch screen 1.69” 240×280 pixel IPS
Bluetooth version 5.0
Functions: Heart rate detection, Blood pressure monitor, Blood Oxygen, Sleep monitor, Sedentary, Remote Camera, Control music, Weather, Multi-sport functions, Pedometer,Calorie Consumption,Distance Calculation.
Ion Lithio Battery 3.7V/260mAh

Charging instruction

This product adopts magnetic charge. There are metal contacts on the back of the watch, bring the magnetic clip of the charging cable close to the metal contacts, this will tend to align correctly automatically. Connect the USB socket of the charging cable to a computer or to a 5V 1A power supply with a USB port. It is possible to view the charge status on the display.

Warning: Do not make the magnetic charging cable any 4 pins connect with conducting material at same time, it may cause short circuit.

Product details

Power ON/ OFF

Power ON: with clock OFF, press and hold the side button for 6 seconds. After startup, the time will be displayed.
Power OFF: with watch ON, hold down the side button for 4 seconds, slide the control on the display to the right, the clock will vibrate and then turn off..

Product description

How to wear the watch

Wear the watch after the ulnar styloid.
Fasten the strap to your wrist by adjusting it perfectly to the size of your wrist.
Keep the sensor as close to the skin, avoid any movement and that external light influences the accuracy of the tests.
Keep the test area clean, sweat or stains will affect the test results.

Dial Switch
Press and hold for 2 seconds on the main screen to enter the watch face switching interface, swipe left and right to switch the watch face to be selected and click the selected watch face.Within its App, select your favorite watch face and load it on the watch by selecting “Download”.

Use the Touch Screen

Touch dial description

Downloading App and use

APP download and installation

Method 1

After the first boot, select the language, the QR code will appear. Scan the QR code and download the App “FitCloudPro”. Enter the App to scan the QR code and bind the device. Long press for 3 seconds to skip this step.
Method 2
Download App: iOS mobile phones can search for “FitCloudPro” in the App Store and Android mobile phones can search for “Fit CloudPro” in other app stores (such as Google Play) to download and install, or scan the code to download and install:

Note: Your smartphone must support Android 5.1 or iOS 9.0 or above and Bluetooth version 5.0 or above.

APP pairing with Android and iOS phones

After downloading the App, open it and set up your profile;
In the main screen select the item “Device” at the bottom;
Select the item “Add device” and then start the search by selecting “Search”;
Wait a few seconds and select “TFit270SCALL” from the list of devices found;
After pairing, the icon on the controls page will no longer have the red bar.

Bluetooth call Connection:

Slide down the home page of the watch to enter the shortcut function page, click the call Bluetooth icon (1);
Then turn On the phone settings (2);
Enter the Bluetooth pairing interface (3);
Search and connect the corresponding Bluetooth call (4). You can check the watch model to determine the Bluetooth name of the call (for example, the watch model is “T-Fit270SCALL” and the Bluetooth call is watch “T-Fit270SCALL TH”

After the watch is connected with mobile phone, you can use the watch to dial, control the mobile phone to make calls, or answer calls from the mobile phone on the watch. At the same time, you can also view the call record information of the watch.
When using the call function, ensure that the connection between the watch and the mobile phone is stable.
Bluetooth call Connection

Smart Watch Features

Data
It displays the step number, distance and calories on the same day. You can set a goal on the App, including step number distance and calories.

Workout
Tap the workout icon on the menu to start a new training measure recording. The last workout recording will be shown on the training page.

Heart Rate
The smart watch could record your heart rate all day. You also could tap on the page to start measuring heart rate.”

Sleep
If you keep wearing smart watch in your sleep, It can provide the hours slept and quality of sleep stats on both the screen and the APP. The device will recalculate the data information for the new day.

Blood Pressure
Tap the blood pressure icon to start measuring your blood pressure. On the blood pressure page, It can show the blood pressure measured data of the last times.

Blood Oxygen
Tap the blood oxygen icon to start measuring your blood oxygen. On the blood oxygen page, It can show the blood oxygen measured data of the last times.

Weather
After you connect your watch with the APP and open the location permission, the weather interface will display the real-time temperature and weather type.

Music
Keep the watch connected to the APP, You can control the pause and start of the mobile phone music player, and song switching.

Messages
Open information push on the App and the watch can receive the corresponding message. It can save up to the last 15 pieces of messages. You can switch on/off the incoming notification in the APP.

Alarm Clock
Keep the watch connected to the APP, you can set a single alarm clock or a cyclic alarm clock. You can set up to 5 alarm clocks, the device will vibrate to remind on time.

Stopwatch
Tap the start button on stopwatch page to start timing, and tap the stop button to stop timing.

Settings
Settings include menu style , screen display , battery , language , password, QR , system ,etc.

BLUETOOTH FOR CALLS
Click on the “Control Panel” to enter the Bluetooth settings for calling: you can also slide left from the main interface to the audio mode interface, turn on the searchable and use the mobile phone to connect to the Bluetooth below to use the calling function.

WARNING

The smart watch should not be used for any medical purpose though it with dynamically monitor the heart rate at real time. The data is for reference only.
Always consult your doctor before starting a exercise program.

Warnings
This device is an electronic instrument of high precision; therefore, avoid using it in the following cases:

Close to strong heat sources such as heaters and stoves.
In environments that are too cold or too hot or very dusty.
The appliance must not be exposed to dripping or splashing water. No liquid-filled objects, such as vases, must be placed on the appliance.
If liquids penetrate into the device, bring the device to the nearest authorized TREVI service Centre.
Do not use the device near flammable or explosive gases, this may cause a malfunction of the device or a fire hazard.
No naked flame sources, such as lighted candles, must be placed on the appliance.
Keep the device out of reach of children. The device is not a toy. The device is made up of small removable parts which, if ingested, can cause suffocation.
Do not expose the device to strong shocks.
Store the product in a dry place when you are not using it.
Keep this instruction manual.

Common problem handling

Watch won’t turn on

Please press and hold the power button fore more that 3 seconds.
Maybe the battery is too low, please charge it in time.

Bluetooth is not connected or unable to connect

Please, try to restart the watch and reconnect.
Please, try to restart the phone’s Bluetooth and connect again.
Do not connect the phone to other Bluetooth devices at the same time.

Inaccurate heart rate/ blood pressure/ blood oxygen

Generally, it is caused by poor contact between the sensor of the watch and the human body during measurement.
Please, make sure that the sensor is in full contact with your wrist during measurement.
Please keep your body still and the watch close to your wrist during measurement.
For people with darker skin and more hair on their arms, please turn on the enhanced measurement in the App (Device > Elevated Heart Ratenhanced Measurement).

Sleep data is not accurate enough

Sleep monitoring is to simulate the natural state of falling asleep and waking up, and needs to be worn normally.
Wear it when you fall asleep too late or when you fall asleep, errors may accur.
Sleep data is not monitored during the day, and the default sleep monitoring is from 9:30 pm to 12:00 noon the next day

Precautions for correct disposal of the product
The symbol shown on the equipment indicates that waste must be disposed of in “separate collection” and so the product must not be disposed of together with urban waste. The user must take the product to special “separate waste collection centres” provided by local government, or deliver it to the retailer against the purchase of a new product. Separate collection of waste and subsequent treatment, recycling and disposal operations promotes the production of equipment with recycled materials and limits negative effects on the environment and on health caused by improper handling of waste. Illegal disposal of the product leads to the enforcement of administrative penalties.

Simplified EU Declaration Of Conformity
Hereby TREVI S.p.A. declares that the equipment T-Fit 270 S CALL is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address
https://www.trevi.it/dms/zidi/TREVI/DOCTFIT270SCALL.pdf